2024年4月28日发(作者：段干华)
SANDVIK TH540
UNDERGROUND TRUCK
TECHNICAL SPECIFICATION
The Sandvik TH540 is a high performance 40 tonne
articulated underground dump truck for use in 5 x
5 meter haulage ways. Operator safety, health and
comfort are enhanced by the enclosed, vibration
isolation, ISO approved cabin.
The TH540 is well suited for:
• level or steep ramp production haulage in
medium to large mines
• mine development projects in medium to large
mines
• tunneling projects with restricted height
• 3 pass loading with the Sandvik LH514 loader
CAPACITIES
Payload capacity40 000 kg
Dump box22.0 m³
Dump box range18 – 24 m³
SPEEDS FORWARD & REVERSE (LEVEL/LOADED)
1st gear5.5 km/h
2nd gear7.2 km/h
3rd gear9.8 km/h
4th gear12.9 km/h
5th gear17.1 km/h
6th gear22.6 km/h
7th gear30.6 km/h
Reversing with 1st and 3rd
DUMP BOX MOTION TIMES & MOVEMENTS
Discharging time14.0 sec
Dumping angle62 º
OPERATING WEIGHTS*
Total operating weight34 700 kg
Front axle25 900 kg
Rear axle8 800 kg
LOADED WEIGHTS*
Total loaded weight74 700 kg
Front axle37 200 kg
Rear axle37 500 kg
*Unit weight is dependent on the selected options
OPERATIONAL CONDITIONS AND LIMITS
Environmental temperature
Standard operating altitude
From -20 ° to +50° C
With engine Volvo TAD1640VE
from -1500 m to +1000 m at 25
°C without rated power derate
With engine Volvo TAD1660VE
from -1500 m to +1000 m at 25
°C without rated power derate
TRANSMISSION
Fully automatic transmission with electric remote shifting system
and retarder. Seven gears forward and two reverse.
Dana 8000 Series
Standard operating altitude
AXLES
Kessler D106 series spring
a applied hydraulic operated
brakes, equiped with standard
differential, oscillation
Kessler D106 series spring
applied hydraulic operated
brakes, equiped with standard
differential
Front axle
REQUIREMENTS AND COMPLIANCE
Compliance with 2006/95/EC Low voltage directive
Compliance with 2004/108/EC Electromagnetic compatibility
directive
Compliance with 2006/42/EC Machinery directive (Equipment for
EU area, achieved with relevant options)
Design based on EN 1889-1. Machines for underground mines.
Mobile machines working underground. Safety. Part 1: Rubber tyred
vehicles.
Design based on MDG 15. Guideline for mobile and
transportable equipment for use in mines.
Electrical system based on IEC 60204-1. Safety of machinery –
Electrical equipment of machines – Part 1: General requirements
CONTAINS FLOURINATED GREENHOUSE GASES
Refrigerant R134a under pressure max 38 bar/550 PSI:
Filled weight: 2,000 kg
CO2e: 2,860 tons
GWP: 1430
Information based on the F Gas Regulation (EU) No 517/2016
Rear axle
TIRES
Tire size (Tires are application
approved. Brand and type
subject to availability.)
29.5 R 25 E4**
STANDARD OPERATOR’S COMPARTMENT
CABIN
ROPS certification according to EN ISO 3471
FOPS certification according to EN ISO 3449
Sealed, air conditioned, over pressurized, noise suppressed
closed cabin
Sound absorbent material to reduce noise
Laminated glass windows
POWER TRAIN
ENGINE
Diesel engine
Output
Torque
Number of cylinders
Displacement
Cooling system
Combustion principle
Air Filtration
Electric system
Emissions
Ventilation rate
(Ultra low sulphur diesel)
Particulate index
(Ultra low sulphur diesel)
Average fuel consumption
at 50 % load
Exhaust system
Fuel tank capacity
Volvo TAD1640VE (Tier 2)
405 kW (543 hp) @ 1 900 rpm
2 761 Nm @ 1 200 rpm
In-line 6
16.1 l
Liquid cooled
Direct injected, 4-stroke, turbo
with intercooler
Dry type
24 V
Tier 2, Euro Stage II
CANMET 31,400 CFM m3/s,
MSHA 27,000 Ventilation Rate
MSHA Particulate Ventilation
Index 5,000 CFM
40.0 l/h
Catalytic Converter
700 l
Cabin mounted on rubber mounts to the frame to reduce vibra-
tions
Air conditioning unit located outside the cabin to reduce noise
inside the cabin
Cyclone pre-filter for A/C device
No high pressure hoses in the operator’s compartment
Inclinometers to indicate operating angle
Emergency exit
Three-point contact access system with replaceable and colour
coded handles and steps
Illuminated steps to the cabin
12 V output for communication radio connection
Remote circuit breaker switch
Adjustable steering wheel
OPERATOR’S SEAT
Low frequency suspension
Height adjustment
Adjustment according to the operator’s weight
Fore-aft isolation
Padded and adjustable arm rests
Adjustable lumbar support
Selectable damping
CONVERTER
Dana C9000 series with lock-up
Two-point seat belt
TS3-TH540-25/ENG/METRIC
2024年4月28日发(作者：段干华)
SANDVIK TH540
UNDERGROUND TRUCK
TECHNICAL SPECIFICATION
The Sandvik TH540 is a high performance 40 tonne
articulated underground dump truck for use in 5 x
5 meter haulage ways. Operator safety, health and
comfort are enhanced by the enclosed, vibration
isolation, ISO approved cabin.
The TH540 is well suited for:
• level or steep ramp production haulage in
medium to large mines
• mine development projects in medium to large
mines
• tunneling projects with restricted height
• 3 pass loading with the Sandvik LH514 loader
CAPACITIES
Payload capacity40 000 kg
Dump box22.0 m³
Dump box range18 – 24 m³
SPEEDS FORWARD & REVERSE (LEVEL/LOADED)
1st gear5.5 km/h
2nd gear7.2 km/h
3rd gear9.8 km/h
4th gear12.9 km/h
5th gear17.1 km/h
6th gear22.6 km/h
7th gear30.6 km/h
Reversing with 1st and 3rd
DUMP BOX MOTION TIMES & MOVEMENTS
Discharging time14.0 sec
Dumping angle62 º
OPERATING WEIGHTS*
Total operating weight34 700 kg
Front axle25 900 kg
Rear axle8 800 kg
LOADED WEIGHTS*
Total loaded weight74 700 kg
Front axle37 200 kg
Rear axle37 500 kg
*Unit weight is dependent on the selected options
OPERATIONAL CONDITIONS AND LIMITS
Environmental temperature
Standard operating altitude
From -20 ° to +50° C
With engine Volvo TAD1640VE
from -1500 m to +1000 m at 25
°C without rated power derate
With engine Volvo TAD1660VE
from -1500 m to +1000 m at 25
°C without rated power derate
TRANSMISSION
Fully automatic transmission with electric remote shifting system
and retarder. Seven gears forward and two reverse.
Dana 8000 Series
Standard operating altitude
AXLES
Kessler D106 series spring
a applied hydraulic operated
brakes, equiped with standard
differential, oscillation
Kessler D106 series spring
applied hydraulic operated
brakes, equiped with standard
differential
Front axle
REQUIREMENTS AND COMPLIANCE
Compliance with 2006/95/EC Low voltage directive
Compliance with 2004/108/EC Electromagnetic compatibility
directive
Compliance with 2006/42/EC Machinery directive (Equipment for
EU area, achieved with relevant options)
Design based on EN 1889-1. Machines for underground mines.
Mobile machines working underground. Safety. Part 1: Rubber tyred
vehicles.
Design based on MDG 15. Guideline for mobile and
transportable equipment for use in mines.
Electrical system based on IEC 60204-1. Safety of machinery –
Electrical equipment of machines – Part 1: General requirements
CONTAINS FLOURINATED GREENHOUSE GASES
Refrigerant R134a under pressure max 38 bar/550 PSI:
Filled weight: 2,000 kg
CO2e: 2,860 tons
GWP: 1430
Information based on the F Gas Regulation (EU) No 517/2016
Rear axle
TIRES
Tire size (Tires are application
approved. Brand and type
subject to availability.)
29.5 R 25 E4**
STANDARD OPERATOR’S COMPARTMENT
CABIN
ROPS certification according to EN ISO 3471
FOPS certification according to EN ISO 3449
Sealed, air conditioned, over pressurized, noise suppressed
closed cabin
Sound absorbent material to reduce noise
Laminated glass windows
POWER TRAIN
ENGINE
Diesel engine
Output
Torque
Number of cylinders
Displacement
Cooling system
Combustion principle
Air Filtration
Electric system
Emissions
Ventilation rate
(Ultra low sulphur diesel)
Particulate index
(Ultra low sulphur diesel)
Average fuel consumption
at 50 % load
Exhaust system
Fuel tank capacity
Volvo TAD1640VE (Tier 2)
405 kW (543 hp) @ 1 900 rpm
2 761 Nm @ 1 200 rpm
In-line 6
16.1 l
Liquid cooled
Direct injected, 4-stroke, turbo
with intercooler
Dry type
24 V
Tier 2, Euro Stage II
CANMET 31,400 CFM m3/s,
MSHA 27,000 Ventilation Rate
MSHA Particulate Ventilation
Index 5,000 CFM
40.0 l/h
Catalytic Converter
700 l
Cabin mounted on rubber mounts to the frame to reduce vibra-
tions
Air conditioning unit located outside the cabin to reduce noise
inside the cabin
Cyclone pre-filter for A/C device
No high pressure hoses in the operator’s compartment
Inclinometers to indicate operating angle
Emergency exit
Three-point contact access system with replaceable and colour
coded handles and steps
Illuminated steps to the cabin
12 V output for communication radio connection
Remote circuit breaker switch
Adjustable steering wheel
OPERATOR’S SEAT
Low frequency suspension
Height adjustment
Adjustment according to the operator’s weight
Fore-aft isolation
Padded and adjustable arm rests
Adjustable lumbar support
Selectable damping
CONVERTER
Dana C9000 series with lock-up
Two-point seat belt
TS3-TH540-25/ENG/METRIC