2024年5月26日发(作者：门罡)
KintexUltraScale FPGAs Data Sheet:
DC and AC Switching Characteristics
DS892 (v1.19) September 22, 2020
Product Specification
Summary
The Xilinx® Kintex® UltraScale™ FPGAs are available in -3, -2, -1, and -1L speed grades, with -3 having the
highest performance. The -1L devices can operate at either of two V
CCINT
voltages, 0.95V and 0.90V and
are screened for lower maximum static power. When operated at V
CCINT
= 0.95V, the speed specification
of a -1L device is the same as the -1 speed grade. When operated at V
CCINT
= 0.90V, the -1L performance
and static and dynamic power is reduced.
DC and AC characteristics are specified in commercial, extended, industrial, and military temperature
ranges. Except the operating temperature range or unless otherwise noted, all the DC and AC electrical
parameters are the same for a particular speed grade (that is, the timing characteristics of a -1 speed
grade industrial device are the same as for a -1 speed grade commercial device). However, only selected
speed grades and/or devices are available in each temperature range.
All supply voltage and junction temperature specifications are representative of worst-case conditions.
The parameters included are common to popular designs and typical applications.
This data sheet, part of an overall set of documentation on the UltraScale architecture-based devices, is
available on the Xilinx.
DC Characteristics
Table 1:Absolute Maximum Ratings
(1)
Symbol
FPGA Logic
V
CCINT
V
CCINT_IO
(2)
V
CCAUX
V
CCBRAM
V
CCO
V
CCAUX_IO
(3)
V
REF
Internal supply voltage
Internal supply voltage for the I/O banks
Auxiliary supply voltage
Supply voltage for the block RAM memories
Output drivers supply voltage for HR I/O banks
Output drivers supply voltage for HP I/O banks
Auxiliary supply voltage for the I/O banks
Input reference voltage
I/O input voltage for HR I/O banks
V
IN
(4)(5)(6)
I/O input voltage for HP I/O banks
I/O input voltage (when V
CCO
= 3.3V) for V
REF
and differential I/O
standards except TMDS_33
(7)
–0.500
–0.500
–0.500
–0.500
–0.500
–0.500
–0.500
–0.500
–0.400
–0.550
–0.400
1.100
1.100
2.000
1.100
3.400
2.000
2.000
2.000
V
CCO
+0.550
V
CCO
+0.550
2.625
V
V
V
V
V
V
V
V
V
V
V
DescriptionMinMaxUnits
DS892 (v1.19) September 22, 2020
Product Specification
KintexUltraScale FPGAs Data Sheet: DC and AC Switching Characteristics
Production Silicon and Software Status
In some cases, a particular family member (and speed grade) is released to production before a speed
specification is released with the correct label (Advance, Preliminary, Production). Any labeling
discrepancies are corrected in subsequent speed specification releases.
Table22 lists the production released KintexUltraScale FPGAs, speed grade, and the minimum
corresponding supported speed specification version and Vivado software revisions. The Vivado software
and speed specifications listed are the minimum releases required for production. All subsequent releases
of software and speed specifications are valid.
Table 22:KintexUltraScale FPGAs Production Software and Speed Specification Release
(1)
Speed Grade, Temperature Ranges, and V
CCINT
Operating Voltages
Device
XCKU025
(2)
1.0V
-3E
N/A
Vivado Tools 2015.2.1
v1.23 for FBVA676 and
FFVA1156 packages
0.95V
-2E, -2I-1C, -1I-1M
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0.90V
-1LI
N/A
-1LI
(3)
N/AVivado Tools 2015.3 v1.23
Vivado Tools 2015.1 v1.23 for
FBVA676 and FFVA1156 packages
Vivado Tools 2015.3 v1.23
XCKU035
(2)
Vivado Tools 2015.3 v1.23 for FBVA900
Vivado Tools 2015.4 v1.23 for SFVA784
Vivado Tools 2015.2.1
v1.23 for FBVA676 and
FFVA1156 packages
Vivado Tools 2015.1 v1.23 for
FBVA676 and FFVA1156 packages
Vivado Tools 2015.4 v1.23 for
SFVA784
Vivado Tools 2015.3 v1.23
XCKU040
(2)
Vivado Tools 2015.3 v1.23 for FBVA900
Vivado Tools 2015.4 v1.23 for SFVA784
Vivado Tools 2015.4 v1.23 for
SFVA784
Vivado Tools
2015.3 v1.23
N/A
N/A
N/A
N/A
Vivado Tools
2015.4 v1.23
N/A
N/A
N/A
N/A
N/A
XCKU060
(2)
XCKU085
(2)
XCKU095
XCKU115
(2)
XQKU040
XQKU060
XQKU095
XQKU115
Notes:
1.
2.
3.
Vivado Tools 2015.4 v1.23
Vivado Tools 2015.4 v1.24
N/A
Vivado Tools 2015.4 v1.24
N/A
N/A
N/A
N/A
Vivado Tools 2015.2 v1.23
Vivado Tools 2015.3 v1.24
Vivado Tools 2015.3 v1.24
Vivado Tools 2015.2.1 v1.24
Vivado Tools 2016.4 v1.23
Vivado Tools 2016.4 v1.23
Vivado Tools 2016.4 v1.24
Vivado Tools 2016.4 v1.24
Vivado Tools 2016.1 v1.24
Vivado Tools 2016.1 v1.24
N/AN/A
For designs developed using Vivado tools prior to 2016.4, see the design advisory answer record AR68169: Design
Advisory for Kintex UltraScale FPGAs and Virtex UltraScale FPGAs—New minimum production speed specification version
(Speed File) required for all designs
.
Designs with these devices that use the dedicated System Monitor I2C (I2C_SCL and I2C_SDA) or PCIe reset (PERSTN0
or PERSTN1) I/O where the bank 65 V
CCO
=3.3V must use Vivado Design Suite 2015.4 or later.
The lowest power -1L devices, where V
CCINT
=0.90V, are listed in the Vivado Design Suite as -1LV.
DS892 (v1.19) September 22, 2020
Product Specification
2024年5月26日发(作者：门罡)
KintexUltraScale FPGAs Data Sheet:
DC and AC Switching Characteristics
DS892 (v1.19) September 22, 2020
Product Specification
Summary
The Xilinx® Kintex® UltraScale™ FPGAs are available in -3, -2, -1, and -1L speed grades, with -3 having the
highest performance. The -1L devices can operate at either of two V
CCINT
voltages, 0.95V and 0.90V and
are screened for lower maximum static power. When operated at V
CCINT
= 0.95V, the speed specification
of a -1L device is the same as the -1 speed grade. When operated at V
CCINT
= 0.90V, the -1L performance
and static and dynamic power is reduced.
DC and AC characteristics are specified in commercial, extended, industrial, and military temperature
ranges. Except the operating temperature range or unless otherwise noted, all the DC and AC electrical
parameters are the same for a particular speed grade (that is, the timing characteristics of a -1 speed
grade industrial device are the same as for a -1 speed grade commercial device). However, only selected
speed grades and/or devices are available in each temperature range.
All supply voltage and junction temperature specifications are representative of worst-case conditions.
The parameters included are common to popular designs and typical applications.
This data sheet, part of an overall set of documentation on the UltraScale architecture-based devices, is
available on the Xilinx.
DC Characteristics
Table 1:Absolute Maximum Ratings
(1)
Symbol
FPGA Logic
V
CCINT
V
CCINT_IO
(2)
V
CCAUX
V
CCBRAM
V
CCO
V
CCAUX_IO
(3)
V
REF
Internal supply voltage
Internal supply voltage for the I/O banks
Auxiliary supply voltage
Supply voltage for the block RAM memories
Output drivers supply voltage for HR I/O banks
Output drivers supply voltage for HP I/O banks
Auxiliary supply voltage for the I/O banks
Input reference voltage
I/O input voltage for HR I/O banks
V
IN
(4)(5)(6)
I/O input voltage for HP I/O banks
I/O input voltage (when V
CCO
= 3.3V) for V
REF
and differential I/O
standards except TMDS_33
(7)
–0.500
–0.500
–0.500
–0.500
–0.500
–0.500
–0.500
–0.500
–0.400
–0.550
–0.400
1.100
1.100
2.000
1.100
3.400
2.000
2.000
2.000
V
CCO
+0.550
V
CCO
+0.550
2.625
V
V
V
V
V
V
V
V
V
V
V
DescriptionMinMaxUnits
DS892 (v1.19) September 22, 2020
Product Specification
KintexUltraScale FPGAs Data Sheet: DC and AC Switching Characteristics
Production Silicon and Software Status
In some cases, a particular family member (and speed grade) is released to production before a speed
specification is released with the correct label (Advance, Preliminary, Production). Any labeling
discrepancies are corrected in subsequent speed specification releases.
Table22 lists the production released KintexUltraScale FPGAs, speed grade, and the minimum
corresponding supported speed specification version and Vivado software revisions. The Vivado software
and speed specifications listed are the minimum releases required for production. All subsequent releases
of software and speed specifications are valid.
Table 22:KintexUltraScale FPGAs Production Software and Speed Specification Release
(1)
Speed Grade, Temperature Ranges, and V
CCINT
Operating Voltages
Device
XCKU025
(2)
1.0V
-3E
N/A
Vivado Tools 2015.2.1
v1.23 for FBVA676 and
FFVA1156 packages
0.95V
-2E, -2I-1C, -1I-1M
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0.90V
-1LI
N/A
-1LI
(3)
N/AVivado Tools 2015.3 v1.23
Vivado Tools 2015.1 v1.23 for
FBVA676 and FFVA1156 packages
Vivado Tools 2015.3 v1.23
XCKU035
(2)
Vivado Tools 2015.3 v1.23 for FBVA900
Vivado Tools 2015.4 v1.23 for SFVA784
Vivado Tools 2015.2.1
v1.23 for FBVA676 and
FFVA1156 packages
Vivado Tools 2015.1 v1.23 for
FBVA676 and FFVA1156 packages
Vivado Tools 2015.4 v1.23 for
SFVA784
Vivado Tools 2015.3 v1.23
XCKU040
(2)
Vivado Tools 2015.3 v1.23 for FBVA900
Vivado Tools 2015.4 v1.23 for SFVA784
Vivado Tools 2015.4 v1.23 for
SFVA784
Vivado Tools
2015.3 v1.23
N/A
N/A
N/A
N/A
Vivado Tools
2015.4 v1.23
N/A
N/A
N/A
N/A
N/A
XCKU060
(2)
XCKU085
(2)
XCKU095
XCKU115
(2)
XQKU040
XQKU060
XQKU095
XQKU115
Notes:
1.
2.
3.
Vivado Tools 2015.4 v1.23
Vivado Tools 2015.4 v1.24
N/A
Vivado Tools 2015.4 v1.24
N/A
N/A
N/A
N/A
Vivado Tools 2015.2 v1.23
Vivado Tools 2015.3 v1.24
Vivado Tools 2015.3 v1.24
Vivado Tools 2015.2.1 v1.24
Vivado Tools 2016.4 v1.23
Vivado Tools 2016.4 v1.23
Vivado Tools 2016.4 v1.24
Vivado Tools 2016.4 v1.24
Vivado Tools 2016.1 v1.24
Vivado Tools 2016.1 v1.24
N/AN/A
For designs developed using Vivado tools prior to 2016.4, see the design advisory answer record AR68169: Design
Advisory for Kintex UltraScale FPGAs and Virtex UltraScale FPGAs—New minimum production speed specification version
(Speed File) required for all designs
.
Designs with these devices that use the dedicated System Monitor I2C (I2C_SCL and I2C_SDA) or PCIe reset (PERSTN0
or PERSTN1) I/O where the bank 65 V
CCO
=3.3V must use Vivado Design Suite 2015.4 or later.
The lowest power -1L devices, where V
CCINT
=0.90V, are listed in the Vivado Design Suite as -1LV.
DS892 (v1.19) September 22, 2020
Product Specification