2024年6月12日发(作者：郝诗柳)
2692
Cab 2282
Chassis Dimensions [mm]
WB Wheelbase
3500
3800
4100
4400
4700
5000
5300
5600
5900
6200
6500
A
D
N
N
Overall Chassis Length
Center of rear axle to front of body
Rear Overhang (Min.)
Rear Overhang (Max.)
6975
2948
2055
2155
7425
3248
1885
2305
7955
3548
2445
2535
8425
3848
2635
2705
8915
4148
2835
2895
9435
4448
2895
3115
9915 10425 10835 11430 11730
4748 5048 5348 5648 5948
2895 3415 3295 3505 3755
3295 3505 3615 3910 3910
Y
Y
Center of Gravity for Payload (Min.)
Center of Gravity for Payload (Max.)
-281
652
-307
709
-332
768
-360
824
-388
882
-426
936
-455
993
-485
1050
-501
1114
-548
1165
-584
1216
Chassis Weights [kg]
Front Axle
Rear Axle
Kerb Weight
Payload (including body, driver, fuel, etc.)
2880
1115
3995
6005
2885
1130
4015
5985
2885
1150
4035
5965
2885
1165
4050
5950
2890
1190
4080
5920
2900
1225
4125
5875
2905
1240
4145
5855
2905
1255
4160
5840
2895
1260
4155
5845
2910
1295
4205
5795
2920
1300
4220
5780
Turning Diameter [mm]
Turning Circle Diameter Kerb to Kerb
Turning Circle Diameter Wall to Wall
12300 13200 14100 15000 15900 16800 17700 18600 19500 20400 21300
13700 14600 15500 16400 17300 18200 19100 20000 20900 21800 22700
Plated Weights [kg]
Plated
Design
Gross Vehicle Weight
Gross Combination Weight
Front Axle
Rear Axle
10000
15500
4000
7600
10000
15500
4000
7600
Important Notes
Chassis weight includes oil, water, AdBlue, 0 litres fuel and without driver. Kerb
weight can vary ± 3%.
Turning diameters are theoretically calculated.
Legal weights can differ from country to country.
For more detailed weight information, including optional equipment weights,
ask your Volvo sales contact to enter your specification into the Volvo Weight
Information system (WIS).
Do NOT use this drawing for bodybuilding. Refer to Volvo Bodybuilder
Instructions and chassis assembly drawing FL42R510A.
Chassis Dimensions
Cab Height: +39 mm for CAB-CRW.
Front Axle to Back of Cab: +1294 mm for CAB-CRW, +316 mm for CAB-SSLP.
D-measure includes a front clearance of 50 mm and for rigid trucks also a
subframe of 120 mm.
Height can vary ± 20 mm for leaf and ± 10 mm for air suspension.
All dimensions are for unladen chassis and any tag axles down.
Weight and dimensions are based upon the following tyres:
Front Axle Tyres: 235/75R17.5
Drive Axle Tyres: 235/75R17.5
Ref: FL 42 R 510A GBR 2023-09-06 ENG
1 (3)
CORE COMPONENTS
■
CHH-LOW
■ RAD-A2V
□ CAB-CRW
□ CAB-DAY
□ CAB-SSLP
Chassis height - Low - for loading heights check the unique
BEP chassis drawing attached to this quote
Rear suspension - Two bag rear air suspension
Cab - Four-door, six seat crewcab
Designed and built to Swedish impact and ECE R29
regulations
Cab - Day, with steel safety cage design.
Designed and built to Swedish impact and ECE R29
regulations
Cab - Comfort with additional storage space or optional fold up
bunk behind the driver - with steel safety cage design.
Designed and built to Swedish impact and ECE R29
regulations.
Emission level - Euro VI step E
Engine - D5K210 four-cylinder 5.1 litre developing 210hp at
2200rpm.
Peak torque 800Nm at 1100-1700rpm.
Engine - D5K240 four-cylinder 5.1 litre developing 240hp at
2200rpm.
Peak torque 900Nm at 1100-1600rpm.
Gearbox - Automated 6-speed I-sync overdrive - if the truck is
built from week 47 an 8 speed ZF powerline automatic.
Gearbox - Automated 6-speed I-sync overdrive - if the truck is
built from week 47 an 8 speed ZF powerline automatic.
Gearbox - Manual 6-speed overdrive
Gearbox - Manual 6-speed overdrive
Engine brake type - Exhaust brake controlled by steering
column switch
Drive axle - RSS0819A single reduction with differential lock
Design GCW 18.75 tonne
Cab Package - Drive
Visibility package
Airflow Package
Audio System - Digital DAB AM/FM Radio with Bluetooth -
without CD player
Audio - Preparation for DAB radio including amplifier and aerial
Front suspension - Parabolic front springs with shock
absorbers and anti-roll bar
Brake package - EBS medium including traction control & hill
hold
Brake package - EBS standard package without traction
control - Without
Rear suspension - Air
Air suspension levelling control - Remote control on wander-
lead
Air suspension levelling control - Integral dash switches
Chassis frame thickness - 6 mm web and flange
Chassis frame thickness - 7 mm web and flange
Chassis frame thickness - 8 mm web and flange
Battery Capacity - 2 x 170 Ah on the left-hand side
ADR Adaptation - For transportation of dangerous goods on
the road - Note does NOT include safe loading pass package if
required this is quoted separately
Right fuel tank - 215-litre plastic
Min volume 80l
Max volume 430l
Left fuel tank - Without
Adblue tank position - Chassis mounted on the right-hand side
□ WHC-FIX1
□ WHC-FIX2
□ TOWMBRH
Wheel chock - One fixed design
Wheel chocks - Two fixed design
Tow member - High mounted in centre of frame - Check the
GCW in the "Truck Use" section of this specification
□ C-RO40AG Drawbar coupling - Rockinger 400 G145
■ TOWF-NO1 Front towing device - One pin in bumper
□ TOWF-NO2 Front towing device - Two pins in bumper
□ TOWR-ONE Light trailer coupling - Pintle type hitch attached to rear cross
member for an unbraked trailer
□ TREL15 Trailer electrical connection - Single 15 pin - ADR certified
□ TBC-EC Trailer brakes with EC palm coupling connectors
□ RUP-FIX2 Rear underrun protection - Fixed EC approved
□ RFEND-T Rear mud wings - Temporary on drive axle for transport
delivery only
□ 2024GSR GSR2 Safety Package - includes moving off information, cyclist
and pedestrian side sensors, reverse camera, driver alert
support, tyre pressure monitoring, intelligent speed assist,
alcohol lock preparation interface, emergency brake lights and
automatic headlight switching
WHEELS & TYRES
□
RT-ALDP Wheels - Howmet Alcoa Dura-Bright aluminium rims - standard
holes for long stud fixing
■ RT-STEEL Wheels - Steel rims
□ SPWT-F Spare wheel & tyre - Spare with front tyre pattern
□ SWCP-LF Spare wheel carrier on left side of chassis ahead of rear axle
□ SWCP-R Spare wheel carrier rear mounted below frame.
□ SWCP-T Spare wheel supplied temporarily strapped to chassis
□ SWCP-TP Spare wheel carrier tranport mounted on frame (spare wheel
carrier not included)
□ JACK-6T
□ GAUGE-TP Tyre pressure gauge
DRIVELINE EQUIPMENT
■
CS39A-O Clutch - Single plate 395mm (16")
□ TC-HWO Transmission oil cooler - water to oil
■ 1COMP500 Air compressor - Single cylinder 360 cc - 500 litres per minute
□ AIRIN-FR Air intake - Under the front grille - Left-hand drive only
■ AIRIN-HI Air intake - Mounted behind cab on the left-hand side
□ AIRIN-RL Air intake - Chassis mounted behind cab on the left-hand side
■ ACL1ST Air filter - Single element
□ ACL1ST-S Air filter - two-stage element
■ 24AL110B Alternator capacity - 110 amp
□ 24AL130B Alternator capacity - 130 amp
□ CCV-C Closed crankcase ventilation
■ CCV-OX Open crankcase ventilation with oil separator and a
maintenance free gas centrifuge
□ EST-AID Engine starting aid -Preheating element in the air inlet manifold
□ PTER-100 Engine power-take-off - Rear-mounted with DIN100/ISO7646
flange
□ PTER-DIN Engine power-take-off - Rear-mounted with DIN5462 (female)
splined shaft for a close-coupled pump
□ PTER1400 Engine power-take-off - Rear-mounted with SAE 1410 flange
□ PR-HF4S Live-drive PTO for Allison gearbox output 400Nm for flange
connection
mounted on the side of the torque convertor
□ PR-HF4SH Live-drive high speed PTO for Allison gearbox output 400Nm
for hydraulic pump connection
mounted on the side of the torque convertor
□ PR-HF6S Live-drive PTO for Allison gearbox output 600Nm for flange
connection
mounted on the side of the torque convertor
■ EU6SCR
■ D5K210
□ D5K240
□ ATO1056
□ ATO8006
■ STO8006
□ ZTO1006
■ EBR-EPG
■ RSS0819A
Packages
□
DRIVEFL
□ VISIFL
□ AIRFLOW
□ AUDIODAB
■ AUDIOPD
CHASSIS
■
FST-PAR
□ EBS-MED
■ EBS-STD
■ RST-AIR
■ SUSPL-E1
□ SUSPL-E3
■ FST6060
□ FST7070
□ FST8080
■ 2BATT170
□ ADR2
■ R215P
■ UL-FUEL
■ ADTP-R
■ Standard Equipment □ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
Ref: FL 42 R 510A GBR 2023-09-06 ENG
2 (3)
□ PR-HP4S Live-drive PTO for Allison gearbox output 400Nm for hydraulic
pump connection
mounted on the side of the torque convertor
□ PR-HP4SH Live-drive high speed PTO for Allison gearbox output 400Nm
for hydraulic pump connection
mounted on the side of the torque convertor
□ PR-HP6S Live-drive PTO for Allison gearbox output 600Nm for hydraulic
pump connection
mounted on the side of the torque convertor
□ PTR-FH5 Rear PTO Gearbox S88 flange DIN connection
□ PTR-PH4 Rear PTO Gearbox S88 pump DIN connection
□ HPG-F101 Gearbox mounted hydraulic pump F1-101, fixed displacement,
single flow.
□ HPG-F41 Gearbox mounted hydraulic pump F1-41, fixed displacement,
single flow.
□ HPG-F51 Gearbox mounted hydraulic pump F1-51, fixed displacement,
single flow.
□ HPG-F61 Gearbox mounted hydraulic pump F1-61, fixed displacement,
single flow.
□ HPG-F81 Gearbox mounted hydraulic pump F1-81, fixed displacement,
single flow.
□ ETC Electronic throttle control - dash mounted switch for PTO
speed control
CAB INTERIOR
□
STWPOS-L
Steering wheel position - LEFT-HAND DRIVE
■ STWPOS-R Steering wheel position - RIGHT-HAND DRIVE
■ TAS-DIG4 Smart tachograph - Continental VDO 4.1 version 2 - legal
demand from 21/08/2023
CAB EXTERIOR
□
SUNV-B Exterior sun visor - Smoked grey
■ SUNV-PK Exterior sun visor preparation kit only
□ AD-SIDES Cab side deflector - Short extension panels
□ BEACON-P Roof beacons - switch and wiring preparation only
□ BEACONA2 Roof-mounted beacons - Two LED amber beacons mounted
direct on roof
SUPERSTRUCTURE PREPARATIONS
FBA-BTF
□Lower front body attachments - For torsionally flexible -
platform body
□ FBA-BTSF Lower front body attachments - For torsionally semi-flexible
body - box or curtainsider
□ RBA-T2 Rear body attachments - Divided
□ TAILPREP Taillift preparation kit - cab switch and warning in driver display
DELIVERY SERVICES
□
TGW-4G Telematics gateway - GSM/GPRS/4G modem, WLAN
■ WVTA EC Whole Vehicle Type Approved - First stage chassis cab
■ Standard Equipment □ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
Ref: FL 42 R 510A GBR 2023-09-06 ENG
3 (3)
2024年6月12日发(作者：郝诗柳)
2692
Cab 2282
Chassis Dimensions [mm]
WB Wheelbase
3500
3800
4100
4400
4700
5000
5300
5600
5900
6200
6500
A
D
N
N
Overall Chassis Length
Center of rear axle to front of body
Rear Overhang (Min.)
Rear Overhang (Max.)
6975
2948
2055
2155
7425
3248
1885
2305
7955
3548
2445
2535
8425
3848
2635
2705
8915
4148
2835
2895
9435
4448
2895
3115
9915 10425 10835 11430 11730
4748 5048 5348 5648 5948
2895 3415 3295 3505 3755
3295 3505 3615 3910 3910
Y
Y
Center of Gravity for Payload (Min.)
Center of Gravity for Payload (Max.)
-281
652
-307
709
-332
768
-360
824
-388
882
-426
936
-455
993
-485
1050
-501
1114
-548
1165
-584
1216
Chassis Weights [kg]
Front Axle
Rear Axle
Kerb Weight
Payload (including body, driver, fuel, etc.)
2880
1115
3995
6005
2885
1130
4015
5985
2885
1150
4035
5965
2885
1165
4050
5950
2890
1190
4080
5920
2900
1225
4125
5875
2905
1240
4145
5855
2905
1255
4160
5840
2895
1260
4155
5845
2910
1295
4205
5795
2920
1300
4220
5780
Turning Diameter [mm]
Turning Circle Diameter Kerb to Kerb
Turning Circle Diameter Wall to Wall
12300 13200 14100 15000 15900 16800 17700 18600 19500 20400 21300
13700 14600 15500 16400 17300 18200 19100 20000 20900 21800 22700
Plated Weights [kg]
Plated
Design
Gross Vehicle Weight
Gross Combination Weight
Front Axle
Rear Axle
10000
15500
4000
7600
10000
15500
4000
7600
Important Notes
Chassis weight includes oil, water, AdBlue, 0 litres fuel and without driver. Kerb
weight can vary ± 3%.
Turning diameters are theoretically calculated.
Legal weights can differ from country to country.
For more detailed weight information, including optional equipment weights,
ask your Volvo sales contact to enter your specification into the Volvo Weight
Information system (WIS).
Do NOT use this drawing for bodybuilding. Refer to Volvo Bodybuilder
Instructions and chassis assembly drawing FL42R510A.
Chassis Dimensions
Cab Height: +39 mm for CAB-CRW.
Front Axle to Back of Cab: +1294 mm for CAB-CRW, +316 mm for CAB-SSLP.
D-measure includes a front clearance of 50 mm and for rigid trucks also a
subframe of 120 mm.
Height can vary ± 20 mm for leaf and ± 10 mm for air suspension.
All dimensions are for unladen chassis and any tag axles down.
Weight and dimensions are based upon the following tyres:
Front Axle Tyres: 235/75R17.5
Drive Axle Tyres: 235/75R17.5
Ref: FL 42 R 510A GBR 2023-09-06 ENG
1 (3)
CORE COMPONENTS
■
CHH-LOW
■ RAD-A2V
□ CAB-CRW
□ CAB-DAY
□ CAB-SSLP
Chassis height - Low - for loading heights check the unique
BEP chassis drawing attached to this quote
Rear suspension - Two bag rear air suspension
Cab - Four-door, six seat crewcab
Designed and built to Swedish impact and ECE R29
regulations
Cab - Day, with steel safety cage design.
Designed and built to Swedish impact and ECE R29
regulations
Cab - Comfort with additional storage space or optional fold up
bunk behind the driver - with steel safety cage design.
Designed and built to Swedish impact and ECE R29
regulations.
Emission level - Euro VI step E
Engine - D5K210 four-cylinder 5.1 litre developing 210hp at
2200rpm.
Peak torque 800Nm at 1100-1700rpm.
Engine - D5K240 four-cylinder 5.1 litre developing 240hp at
2200rpm.
Peak torque 900Nm at 1100-1600rpm.
Gearbox - Automated 6-speed I-sync overdrive - if the truck is
built from week 47 an 8 speed ZF powerline automatic.
Gearbox - Automated 6-speed I-sync overdrive - if the truck is
built from week 47 an 8 speed ZF powerline automatic.
Gearbox - Manual 6-speed overdrive
Gearbox - Manual 6-speed overdrive
Engine brake type - Exhaust brake controlled by steering
column switch
Drive axle - RSS0819A single reduction with differential lock
Design GCW 18.75 tonne
Cab Package - Drive
Visibility package
Airflow Package
Audio System - Digital DAB AM/FM Radio with Bluetooth -
without CD player
Audio - Preparation for DAB radio including amplifier and aerial
Front suspension - Parabolic front springs with shock
absorbers and anti-roll bar
Brake package - EBS medium including traction control & hill
hold
Brake package - EBS standard package without traction
control - Without
Rear suspension - Air
Air suspension levelling control - Remote control on wander-
lead
Air suspension levelling control - Integral dash switches
Chassis frame thickness - 6 mm web and flange
Chassis frame thickness - 7 mm web and flange
Chassis frame thickness - 8 mm web and flange
Battery Capacity - 2 x 170 Ah on the left-hand side
ADR Adaptation - For transportation of dangerous goods on
the road - Note does NOT include safe loading pass package if
required this is quoted separately
Right fuel tank - 215-litre plastic
Min volume 80l
Max volume 430l
Left fuel tank - Without
Adblue tank position - Chassis mounted on the right-hand side
□ WHC-FIX1
□ WHC-FIX2
□ TOWMBRH
Wheel chock - One fixed design
Wheel chocks - Two fixed design
Tow member - High mounted in centre of frame - Check the
GCW in the "Truck Use" section of this specification
□ C-RO40AG Drawbar coupling - Rockinger 400 G145
■ TOWF-NO1 Front towing device - One pin in bumper
□ TOWF-NO2 Front towing device - Two pins in bumper
□ TOWR-ONE Light trailer coupling - Pintle type hitch attached to rear cross
member for an unbraked trailer
□ TREL15 Trailer electrical connection - Single 15 pin - ADR certified
□ TBC-EC Trailer brakes with EC palm coupling connectors
□ RUP-FIX2 Rear underrun protection - Fixed EC approved
□ RFEND-T Rear mud wings - Temporary on drive axle for transport
delivery only
□ 2024GSR GSR2 Safety Package - includes moving off information, cyclist
and pedestrian side sensors, reverse camera, driver alert
support, tyre pressure monitoring, intelligent speed assist,
alcohol lock preparation interface, emergency brake lights and
automatic headlight switching
WHEELS & TYRES
□
RT-ALDP Wheels - Howmet Alcoa Dura-Bright aluminium rims - standard
holes for long stud fixing
■ RT-STEEL Wheels - Steel rims
□ SPWT-F Spare wheel & tyre - Spare with front tyre pattern
□ SWCP-LF Spare wheel carrier on left side of chassis ahead of rear axle
□ SWCP-R Spare wheel carrier rear mounted below frame.
□ SWCP-T Spare wheel supplied temporarily strapped to chassis
□ SWCP-TP Spare wheel carrier tranport mounted on frame (spare wheel
carrier not included)
□ JACK-6T
□ GAUGE-TP Tyre pressure gauge
DRIVELINE EQUIPMENT
■
CS39A-O Clutch - Single plate 395mm (16")
□ TC-HWO Transmission oil cooler - water to oil
■ 1COMP500 Air compressor - Single cylinder 360 cc - 500 litres per minute
□ AIRIN-FR Air intake - Under the front grille - Left-hand drive only
■ AIRIN-HI Air intake - Mounted behind cab on the left-hand side
□ AIRIN-RL Air intake - Chassis mounted behind cab on the left-hand side
■ ACL1ST Air filter - Single element
□ ACL1ST-S Air filter - two-stage element
■ 24AL110B Alternator capacity - 110 amp
□ 24AL130B Alternator capacity - 130 amp
□ CCV-C Closed crankcase ventilation
■ CCV-OX Open crankcase ventilation with oil separator and a
maintenance free gas centrifuge
□ EST-AID Engine starting aid -Preheating element in the air inlet manifold
□ PTER-100 Engine power-take-off - Rear-mounted with DIN100/ISO7646
flange
□ PTER-DIN Engine power-take-off - Rear-mounted with DIN5462 (female)
splined shaft for a close-coupled pump
□ PTER1400 Engine power-take-off - Rear-mounted with SAE 1410 flange
□ PR-HF4S Live-drive PTO for Allison gearbox output 400Nm for flange
connection
mounted on the side of the torque convertor
□ PR-HF4SH Live-drive high speed PTO for Allison gearbox output 400Nm
for hydraulic pump connection
mounted on the side of the torque convertor
□ PR-HF6S Live-drive PTO for Allison gearbox output 600Nm for flange
connection
mounted on the side of the torque convertor
■ EU6SCR
■ D5K210
□ D5K240
□ ATO1056
□ ATO8006
■ STO8006
□ ZTO1006
■ EBR-EPG
■ RSS0819A
Packages
□
DRIVEFL
□ VISIFL
□ AIRFLOW
□ AUDIODAB
■ AUDIOPD
CHASSIS
■
FST-PAR
□ EBS-MED
■ EBS-STD
■ RST-AIR
■ SUSPL-E1
□ SUSPL-E3
■ FST6060
□ FST7070
□ FST8080
■ 2BATT170
□ ADR2
■ R215P
■ UL-FUEL
■ ADTP-R
■ Standard Equipment □ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
Ref: FL 42 R 510A GBR 2023-09-06 ENG
2 (3)
□ PR-HP4S Live-drive PTO for Allison gearbox output 400Nm for hydraulic
pump connection
mounted on the side of the torque convertor
□ PR-HP4SH Live-drive high speed PTO for Allison gearbox output 400Nm
for hydraulic pump connection
mounted on the side of the torque convertor
□ PR-HP6S Live-drive PTO for Allison gearbox output 600Nm for hydraulic
pump connection
mounted on the side of the torque convertor
□ PTR-FH5 Rear PTO Gearbox S88 flange DIN connection
□ PTR-PH4 Rear PTO Gearbox S88 pump DIN connection
□ HPG-F101 Gearbox mounted hydraulic pump F1-101, fixed displacement,
single flow.
□ HPG-F41 Gearbox mounted hydraulic pump F1-41, fixed displacement,
single flow.
□ HPG-F51 Gearbox mounted hydraulic pump F1-51, fixed displacement,
single flow.
□ HPG-F61 Gearbox mounted hydraulic pump F1-61, fixed displacement,
single flow.
□ HPG-F81 Gearbox mounted hydraulic pump F1-81, fixed displacement,
single flow.
□ ETC Electronic throttle control - dash mounted switch for PTO
speed control
CAB INTERIOR
□
STWPOS-L
Steering wheel position - LEFT-HAND DRIVE
■ STWPOS-R Steering wheel position - RIGHT-HAND DRIVE
■ TAS-DIG4 Smart tachograph - Continental VDO 4.1 version 2 - legal
demand from 21/08/2023
CAB EXTERIOR
□
SUNV-B Exterior sun visor - Smoked grey
■ SUNV-PK Exterior sun visor preparation kit only
□ AD-SIDES Cab side deflector - Short extension panels
□ BEACON-P Roof beacons - switch and wiring preparation only
□ BEACONA2 Roof-mounted beacons - Two LED amber beacons mounted
direct on roof
SUPERSTRUCTURE PREPARATIONS
FBA-BTF
□Lower front body attachments - For torsionally flexible -
platform body
□ FBA-BTSF Lower front body attachments - For torsionally semi-flexible
body - box or curtainsider
□ RBA-T2 Rear body attachments - Divided
□ TAILPREP Taillift preparation kit - cab switch and warning in driver display
DELIVERY SERVICES
□
TGW-4G Telematics gateway - GSM/GPRS/4G modem, WLAN
■ WVTA EC Whole Vehicle Type Approved - First stage chassis cab
■ Standard Equipment □ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
Ref: FL 42 R 510A GBR 2023-09-06 ENG
3 (3)