2024年7月16日发(作者：咸滢滢)

Zynq-7000SoC

(Z-7030, Z-7035, Z-7045, and Z-7100)

:

DC and AC Switching Characteristics

DS191 (v1.18.1) July 2, 2018Product Specification

Introduction

The Zynq®-7000 SoCs are available in -3, -2, -2LI, -1, and

-1LQ speed grades, with -3 having the highest performance.

The -2LI devices operate at programmable logic (PL)

V

CCINT

/V

CCBRAM

=0.95V and are screened for lower

maximum static power. The speed specification of a -2LI

device is the same as that of a -2device. The -1LQ devices

operate at the same voltage and speed as the -1Q devices

and are screened for lower power. Zynq-7000 device DC

and AC characteristics are specified in commercial,

extended, industrial, and expanded (Q-temp) temperature

ranges. Except the operating temperature range or unless

otherwise noted, all the DC and AC electrical parameters

are the same for a particular speed grade (that is, the timing

characteristics of a -1 speed grade industrial device are the

same as for a -1 speed grade commercial device). However,

only selected speed grades and/or devices are available in

the commercial, extended, or industrial temperature ranges.

All supply voltage and junction temperature specifications

are representative of worst-case conditions. The

parameters included are common to popular designs and

typical applications.

The available device/package combinations are outlined in:

•

•

•

Zynq-7000SoC Overview (DS190

)

Defense-grade Zynq-7000QSoC Overview (DS196

)

XAZynq-7000SoC Overview (

DS188)

This Zynq-7000 SoC data sheet, which covers the

specifications for the XC7Z030, XA7Z030, XQ7Z030,

XC7Z035, XC7Z045, XQ7Z045, XC7Z100, and XQ7Z100

complements the Zynq-7000 SoC documentation suite

available on the Xilinx .

DC Characteristics

Table 1:Absolute Maximum Ratings

(1)

Symbol

Processing System (PS)

V

CCPINT

V

CCPAUX

V

CCPLL

V

CCO_DDR

V

CCO_MIO

(2)

V

PREF

V

PIN

(2)(3)(4)(5)

PS internal logic supply voltage

PS auxiliary supply voltage

PS PLL supply

PS DDR I/O supply

PS MIO I/O supply

PS input reference voltage

PS MIO I/O input voltage

PS DDR I/O input voltage

–0.5

–0.5

–0.5

–0.5

–0.5

–0.5

–0.40

–0.55

1.1

2.0

2.0

2.0

3.6

2.0

V

CCO_MIO

+0.55

V

CCO_DDR

+0.55

1.1

1.1

2.0

3.6

2.0

2.06

V

V

V

V

V

V

V

V

DescriptionMinMaxUnits

Programmable Logic (PL)

V

CCINT

V

CCBRAM

V

CCAUX

V

CCO

V

CCAUX_IO

(4)

PL internal supply voltage

PL supply voltage for the block RAM memories

PL auxiliary supply voltage

PL output drivers supply voltage for HR I/O banks

PL output drivers supply voltage for HP I/O banks

Auxiliary supply voltage

–0.5

–0.5

–0.5

–0.5

–0.5

–0.5

V

V

V

V

V

V

DS191 (v1.18.1) July 2, 2018

Product Specification

Zynq-7000 SoC (Z-7030, Z-7035, Z-7045, and Z-7100): DC and AC Switching Characteristics

V

ICM

(1)

I/O Standard

DIFF_HSTL_I

DIFF_HSTL_I_18

DIFF_HSTL_II

DIFF_HSTL_II_18

DIFF_HSUL_12

DIFF_MOBILE_DDR

DIFF_SSTL12

DIFF_SSTL135

DIFF_SSTL135_R

DIFF_SSTL15

DIFF_SSTL15_R

DIFF_SSTL18_I

DIFF_SSTL18_II

V

ID

(2)

V, Max

1.125

1.425

1.125

1.425

0.850

1.425

0.850

1.000

1.000

1.125

1.125

1.425

1.425

V

OL

(3)

V, Max

0.400

0.400

0.400

0.400

20% V

CCO

10% V

CCO

V

OH

(4)

V, Min

V

CCO

–0.400

V

CCO

–0.400

V

CCO

–0.400

V

CCO

–0.400

80% V

CCO

90% V

CCO

I

OL

mA, Max

8.00

8.00

16.00

16.00

0.100

0.100

14.25

13.0

8.9

13.0

8.9

8.00

13.4

I

OH

mA, Min

–8.00

–8.00

–16.00

–16.00

–0.100

–0.100

–14.25

–13.0

–8.9

–13.0

–8.9

–8.00

–13.4

V, Min

0.300

0.300

0.300

0.300

0.300

0.300

0.300

0.300

0.300

0.300

0.300

0.300

0.300

V, Typ

0.750

0.900

0.750

0.900

0.600

0.900

0.600

0.675

0.675

0.750

0.750

0.900

0.900

V,

Min

0.100

0.100

0.100

0.100

0.100

0.100

0.100

0.100

0.100

0.100

0.100

0.100

0.100

V, Max

–

–

–

–

–

–

–

–

–

–

–

–

–

(V

CCO

/2)–0.150(V

CCO

/2)+0.150

(V

CCO

/2)–0.150(V

CCO

/2)+0.150

(V

CCO

/2)–0.150(V

CCO

/2)+0.150

(V

CCO

/2)–0.175(V

CCO

/2)+0.175

(V

CCO

/2)–0.175(V

CCO

/2)+0.175

(V

CCO

/2)–0.470(V

CCO

/2)+0.470

(V

CCO

/2)–0.600(V

CCO

/2)+0.600

DS191 (v1.18.1) July 2, 2018

Product Specification

Zynq-7000 SoC (Z-7030, Z-7035, Z-7045, and Z-7100): DC and AC Switching Characteristics

LVDS DC Specifications (LVDS_25)

The LVDS_25 standard is available in the HR I/O banks.

Table 14:

LVDS_25 DC Specifications

(1)

Symbol

V

CCO

V

OH

V

OL

V

ODIFF

V

OCM

V

IDIFF

V

ICM

DC Parameter

Supply Voltage

Output High Voltage for Q and Q

Output Low Voltage for Q and Q

Differential Output Voltage

(Q–Q), Q = High

(Q

–Q), Q=High

Output Common-Mode Voltage

Differential Input Voltage

(Q–Q), Q = High

(Q

–Q), Q=High

Input Common-Mode Voltage

Conditions

R

T

= 100Ω across Q and Q signals

R

T

= 100Ω across Q and Q signals

R

T

= 100Ω across Q and Q signals

Min

2.375

–

0.700

247

1.000

100

0.300

Typ

2.500

–

–

350

1.250

350

1.200

Max

2.625

1.675

–

600

1.425

600

1.500

Units

V

V

V

mV

V

mV

V

R

T

= 100Ω across Q and Q signals

DS191 (v1.18.1) July 2, 2018

Product Specification

Zynq-7000 SoC (Z-7030, Z-7035, Z-7045, and Z-7100): DC and AC Switching Characteristics

DS191 (v1.18.1) July 2, 2018

Product Specification

Zynq-7000 SoC (Z-7030, Z-7035, Z-7045, and Z-7100): DC and AC Switching Characteristics

Table 17:Zynq-7000 Device Speed Grade Designations (Cont’d)

Device

XQ7Z030

XQ7Z045

XQ7Z100

Speed Grade Designations

AdvancePreliminaryProduction

-2I, -2LI, -1I, -1Q

-2I, -2LI, -1I, -1Q, -1LQ

-2I, -2LI, -1I

Production Silicon and Software Status

In some cases, a particular family member (and speed grade) is released to production before a speed specification is

released with the correct label (Advance, Preliminary, Production). Any labeling discrepancies are corrected in subsequent

speed specification releases.

Table18 lists the production released Zynq-7000 device, speed grade, and the minimum corresponding supported speed

specification version and software revisions. The software and speed specifications listed are the minimum releases

required for production. All subsequent releases of software and speed specifications are valid.

Table 18:Zynq-7000 Device Production Software and Speed Specification Release

Device

XC7Z030

XC7Z035

XC7Z045

XC7Z100

XA7Z030

XQ7Z030

XQ7Z045

XQ7Z100

N/A

N/A

N/A

N/A

N/A

Speed Grade Designations

-3E-2E-2I-2LI

Vivado tools

2014.4 v1.11

Vivado tools

2014.4 v1.11

Vivado tools

2014.4 v1.11

N/A

Vivado tools

2015.4 v1.10

-1C-1I-1Q

N/A

N/A

-1LQ

N/A

N/A

N/A

N/A

N/A

N/A

Vivado tools

2015.2 v1.09

N/A

ISE tools 14.5 v1.06 and

Vivado tools 2013.1 v1.06

ISE tools 14.5 v1.06 and

Vivado tools 2013.1 v1.06

N/A

N/A

N/A

N/A

N/A

Vivado tools 2013.2 v1.07

N/A

ISE tools 14.7 v1.06 and

Vivado tools 2013.3 v1.06

Vivado tools 2015.4 v1.10

ISE tools 14.5 v1.06 and

Vivado tools 2013.1 v1.06

ISE tools 14.5 v1.06 and

Vivado tools 2013.1 v1.06

N/A

N/A

N/A

N/A

N/A

Vivado tools

2013.2 v1.07

Vivado tools 2014.4 v1.11

N/A

N/A

Vivado tools 2014.2 v1.08

ISE tools 14.7 v1.06 and Vivado

tools 2013.3 v1.06

Vivado tools

2015.2 v1.09

N/A

Selecting the Correct Speed Grade and Voltage in the Vivado Tools

It is important to select the correct device speed grade and voltage in the Vivado tools for the device that you are selecting.

To select the -3, -2, or -1 (PL 1.0V) speed specifications in the Vivado tools, select the Zynq-7000, XA Zynq-7000, or

Defense Grade Zynq-7000 sub-family, and then select the part name that is the device name followed by the package name

followed by the speed grade. For example, select the xc7z030fbg676-3 part name for the XC7Z030 device in the FBG676

package and -3 speed grade.

To select the -2LI (PL 0.95V) speed specifications in the Vivado tools, select the Zynq-7000 sub-family and then select the

part name that is the device name followed by an i followed by the package name followed by the speed grade. For example,

select the xc7z030ifbg676-2L part name for the XC7Z030 device in the FBG676 package and -2LI (PL 0.95V) speed grade.

The -2LI (PL 0.95V) speed specifications are not supported in the ISE tools.

A similar part naming convention applies to the speed specifications selection in the ISE tools for supported devices. See

Table18 for the subset of Zynq-7000 devices supported in the ISE tools.

DS191 (v1.18.1) July 2, 2018

Product Specification

2024年7月16日发(作者：咸滢滢)

Zynq-7000SoC

(Z-7030, Z-7035, Z-7045, and Z-7100)

:

DC and AC Switching Characteristics

DS191 (v1.18.1) July 2, 2018Product Specification

Introduction

The Zynq®-7000 SoCs are available in -3, -2, -2LI, -1, and

-1LQ speed grades, with -3 having the highest performance.

The -2LI devices operate at programmable logic (PL)

V

CCINT

/V

CCBRAM

=0.95V and are screened for lower

maximum static power. The speed specification of a -2LI

device is the same as that of a -2device. The -1LQ devices

operate at the same voltage and speed as the -1Q devices

and are screened for lower power. Zynq-7000 device DC

and AC characteristics are specified in commercial,

extended, industrial, and expanded (Q-temp) temperature

ranges. Except the operating temperature range or unless

otherwise noted, all the DC and AC electrical parameters

are the same for a particular speed grade (that is, the timing

characteristics of a -1 speed grade industrial device are the

same as for a -1 speed grade commercial device). However,

only selected speed grades and/or devices are available in

the commercial, extended, or industrial temperature ranges.

All supply voltage and junction temperature specifications

are representative of worst-case conditions. The

parameters included are common to popular designs and

typical applications.

The available device/package combinations are outlined in:

•

•

•

Zynq-7000SoC Overview (DS190

)

Defense-grade Zynq-7000QSoC Overview (DS196

)

XAZynq-7000SoC Overview (

DS188)

This Zynq-7000 SoC data sheet, which covers the

specifications for the XC7Z030, XA7Z030, XQ7Z030,

XC7Z035, XC7Z045, XQ7Z045, XC7Z100, and XQ7Z100

complements the Zynq-7000 SoC documentation suite

available on the Xilinx .

DC Characteristics

Table 1:Absolute Maximum Ratings

(1)

Symbol

Processing System (PS)

V

CCPINT

V

CCPAUX

V

CCPLL

V

CCO_DDR

V

CCO_MIO

(2)

V

PREF

V

PIN

(2)(3)(4)(5)

PS internal logic supply voltage

PS auxiliary supply voltage

PS PLL supply

PS DDR I/O supply

PS MIO I/O supply

PS input reference voltage

PS MIO I/O input voltage

PS DDR I/O input voltage

–0.5

–0.5

–0.5

–0.5

–0.5

–0.5

–0.40

–0.55

1.1

2.0

2.0

2.0

3.6

2.0

V

CCO_MIO

+0.55

V

CCO_DDR

+0.55

1.1

1.1

2.0

3.6

2.0

2.06

V

V

V

V

V

V

V

V

DescriptionMinMaxUnits

Programmable Logic (PL)

V

CCINT

V

CCBRAM

V

CCAUX

V

CCO

V

CCAUX_IO

(4)

PL internal supply voltage

PL supply voltage for the block RAM memories

PL auxiliary supply voltage

PL output drivers supply voltage for HR I/O banks

PL output drivers supply voltage for HP I/O banks

Auxiliary supply voltage

–0.5

–0.5

–0.5

–0.5

–0.5

–0.5

V

V

V

V

V

V

DS191 (v1.18.1) July 2, 2018

Product Specification

Zynq-7000 SoC (Z-7030, Z-7035, Z-7045, and Z-7100): DC and AC Switching Characteristics

V

ICM

(1)

I/O Standard

DIFF_HSTL_I

DIFF_HSTL_I_18

DIFF_HSTL_II

DIFF_HSTL_II_18

DIFF_HSUL_12

DIFF_MOBILE_DDR

DIFF_SSTL12

DIFF_SSTL135

DIFF_SSTL135_R

DIFF_SSTL15

DIFF_SSTL15_R

DIFF_SSTL18_I

DIFF_SSTL18_II

V

ID

(2)

V, Max

1.125

1.425

1.125

1.425

0.850

1.425

0.850

1.000

1.000

1.125

1.125

1.425

1.425

V

OL

(3)

V, Max

0.400

0.400

0.400

0.400

20% V

CCO

10% V

CCO

V

OH

(4)

V, Min

V

CCO

–0.400

V

CCO

–0.400

V

CCO

–0.400

V

CCO

–0.400

80% V

CCO

90% V

CCO

I

OL

mA, Max

8.00

8.00

16.00

16.00

0.100

0.100

14.25

13.0

8.9

13.0

8.9

8.00

13.4

I

OH

mA, Min

–8.00

–8.00

–16.00

–16.00

–0.100

–0.100

–14.25

–13.0

–8.9

–13.0

–8.9

–8.00

–13.4

V, Min

0.300

0.300

0.300

0.300

0.300

0.300

0.300

0.300

0.300

0.300

0.300

0.300

0.300

V, Typ

0.750

0.900

0.750

0.900

0.600

0.900

0.600

0.675

0.675

0.750

0.750

0.900

0.900

V,

Min

0.100

0.100

0.100

0.100

0.100

0.100

0.100

0.100

0.100

0.100

0.100

0.100

0.100

V, Max

–

–

–

–

–

–

–

–

–

–

–

–

–

(V

CCO

/2)–0.150(V

CCO

/2)+0.150

(V

CCO

/2)–0.150(V

CCO

/2)+0.150

(V

CCO

/2)–0.150(V

CCO

/2)+0.150

(V

CCO

/2)–0.175(V

CCO

/2)+0.175

(V

CCO

/2)–0.175(V

CCO

/2)+0.175

(V

CCO

/2)–0.470(V

CCO

/2)+0.470

(V

CCO

/2)–0.600(V

CCO

/2)+0.600

DS191 (v1.18.1) July 2, 2018

Product Specification

Zynq-7000 SoC (Z-7030, Z-7035, Z-7045, and Z-7100): DC and AC Switching Characteristics

LVDS DC Specifications (LVDS_25)

The LVDS_25 standard is available in the HR I/O banks.

Table 14:

LVDS_25 DC Specifications

(1)

Symbol

V

CCO

V

OH

V

OL

V

ODIFF

V

OCM

V

IDIFF

V

ICM

DC Parameter

Supply Voltage

Output High Voltage for Q and Q

Output Low Voltage for Q and Q

Differential Output Voltage

(Q–Q), Q = High

(Q

–Q), Q=High

Output Common-Mode Voltage

Differential Input Voltage

(Q–Q), Q = High

(Q

–Q), Q=High

Input Common-Mode Voltage

Conditions

R

T

= 100Ω across Q and Q signals

R

T

= 100Ω across Q and Q signals

R

T

= 100Ω across Q and Q signals

Min

2.375

–

0.700

247

1.000

100

0.300

Typ

2.500

–

–

350

1.250

350

1.200

Max

2.625

1.675

–

600

1.425

600

1.500

Units

V

V

V

mV

V

mV

V

R

T

= 100Ω across Q and Q signals

DS191 (v1.18.1) July 2, 2018

Product Specification

Zynq-7000 SoC (Z-7030, Z-7035, Z-7045, and Z-7100): DC and AC Switching Characteristics

DS191 (v1.18.1) July 2, 2018

Product Specification

Zynq-7000 SoC (Z-7030, Z-7035, Z-7045, and Z-7100): DC and AC Switching Characteristics

Table 17:Zynq-7000 Device Speed Grade Designations (Cont’d)

Device

XQ7Z030

XQ7Z045

XQ7Z100

Speed Grade Designations

AdvancePreliminaryProduction

-2I, -2LI, -1I, -1Q

-2I, -2LI, -1I, -1Q, -1LQ

-2I, -2LI, -1I

Production Silicon and Software Status

In some cases, a particular family member (and speed grade) is released to production before a speed specification is

released with the correct label (Advance, Preliminary, Production). Any labeling discrepancies are corrected in subsequent

speed specification releases.

Table18 lists the production released Zynq-7000 device, speed grade, and the minimum corresponding supported speed

specification version and software revisions. The software and speed specifications listed are the minimum releases

required for production. All subsequent releases of software and speed specifications are valid.

Table 18:Zynq-7000 Device Production Software and Speed Specification Release

Device

XC7Z030

XC7Z035

XC7Z045

XC7Z100

XA7Z030

XQ7Z030

XQ7Z045

XQ7Z100

N/A

N/A

N/A

N/A

N/A

Speed Grade Designations

-3E-2E-2I-2LI

Vivado tools

2014.4 v1.11

Vivado tools

2014.4 v1.11

Vivado tools

2014.4 v1.11

N/A

Vivado tools

2015.4 v1.10

-1C-1I-1Q

N/A

N/A

-1LQ

N/A

N/A

N/A

N/A

N/A

N/A

Vivado tools

2015.2 v1.09

N/A

ISE tools 14.5 v1.06 and

Vivado tools 2013.1 v1.06

ISE tools 14.5 v1.06 and

Vivado tools 2013.1 v1.06

N/A

N/A

N/A

N/A

N/A

Vivado tools 2013.2 v1.07

N/A

ISE tools 14.7 v1.06 and

Vivado tools 2013.3 v1.06

Vivado tools 2015.4 v1.10

ISE tools 14.5 v1.06 and

Vivado tools 2013.1 v1.06

ISE tools 14.5 v1.06 and

Vivado tools 2013.1 v1.06

N/A

N/A

N/A

N/A

N/A

Vivado tools

2013.2 v1.07

Vivado tools 2014.4 v1.11

N/A

N/A

Vivado tools 2014.2 v1.08

ISE tools 14.7 v1.06 and Vivado

tools 2013.3 v1.06

Vivado tools

2015.2 v1.09

N/A

Selecting the Correct Speed Grade and Voltage in the Vivado Tools

It is important to select the correct device speed grade and voltage in the Vivado tools for the device that you are selecting.

To select the -3, -2, or -1 (PL 1.0V) speed specifications in the Vivado tools, select the Zynq-7000, XA Zynq-7000, or

Defense Grade Zynq-7000 sub-family, and then select the part name that is the device name followed by the package name

followed by the speed grade. For example, select the xc7z030fbg676-3 part name for the XC7Z030 device in the FBG676

package and -3 speed grade.

To select the -2LI (PL 0.95V) speed specifications in the Vivado tools, select the Zynq-7000 sub-family and then select the

part name that is the device name followed by an i followed by the package name followed by the speed grade. For example,

select the xc7z030ifbg676-2L part name for the XC7Z030 device in the FBG676 package and -2LI (PL 0.95V) speed grade.

The -2LI (PL 0.95V) speed specifications are not supported in the ISE tools.

A similar part naming convention applies to the speed specifications selection in the ISE tools for supported devices. See

Table18 for the subset of Zynq-7000 devices supported in the ISE tools.

DS191 (v1.18.1) July 2, 2018

Product Specification