EW-7438AC 无线网络扩展器安装指南说明书-USB迷|专注于互联网分享

2024年10月16日发(作者：秋安卉)

EW-7438AC

安装指南

06-2015 / v1.0

产品介绍

I-1. 包装内容

- EW-7438AC

CD光盘片 (内含安装指南及使用手册)

- 安装指南

- 联机资讯卡

I-2. 系统需求

- 无线讯号延伸/ 无线桥接模式: 使用现有2.4GHz或5GHz无线网络

- AP模式: Cable/ xDSL调制解调器

- 配备802.11 b/g/n/a/ac无线网卡的电脑及浏览器(Internet Explorer、Google

Chrome、Firefox、Opera或Safari最新版)

- 智能型手机(设定用): iOS 6 或 Android 4.x 或以上版本

I-3. LED指示灯

在省电模式下，所有LED灯都会被关闭

灯号颜色

LED名称 LED

状态

恒亮

慢速闪烁

说明

接收讯号极佳

(信号强度60 - 100％)

接收讯号良好

(信号强度 40 – 60%)

装置正在启动或等待设定中

蓝灯

快速闪烁

不亮

讯号关闭、未联机或在省电模式下

接收讯号极佳

(信号强度60 - 100％)

接收讯号良好

(信号强度 40 – 60%)

装置正在启动或等待设定中

讯号关闭、未联机或在省电模式下

2.4GHz 或 5GHz的讯号强度: 0 –

40%

2.4GHz 或 5GHz的讯号强度: 40 –

60%

2.4GHz 和 5GHz的讯号强度: 40 –

60%

恒亮

慢速闪烁

蓝灯

快速闪烁

不亮

恒亮

讯号强度

指示灯

红灯

慢速闪烁

快速闪烁

不亮

恒亮

电源

2.4GHz 和 5GHz的讯号强度极佳: 60

– 100%

本装置已启动

恢复至出厂默认设定或系统正在重新

启动中

本装置已关闭

已成功建立WPS联机(此时LED灯会

持续亮灯约30秒)

WPS联机中（正在等待另一WPS设备

的连接）

未建立WPS连接

LAN埠已连接

LAN埠未连接

白灯

闪烁

不亮

WPS

LAN

有线网络

恒亮

蓝灯

闪烁

不亮

恒亮

绿灯

不亮

I-4. 切换键

EW 7438AC本体底部，配备一个切换键，可以让您

在正常/省电/关闭三种模式之间做切换(如下表中

所示)。"Wi-Fi讯号强度"是指的本产品的无线电讯号

强度。

如果您是在小型或中型的空间里使用本产品，您可能

不需要使用到100%的Wi-Fi讯号强度。先试试使用

省电模式，看看是否有足够的Wi-Fi讯号覆盖。如果

是，您还可以因此而省下些电呢！

模式

正常

省电模式

关闭

切换方向

右

中间

左

Description

Wi-Fi讯号强度: 100%

Wi-Fi讯号强度: 25%

关闭电源

II.

安装

EW-7438AC

有三种操作模式，您可依您的网络环境需求来选择。各操作模式说明

如下:

无线讯号延伸

器模式

EW-7438AC

可连接至您现有的无线网络并延伸其无

线讯号

建议架设EW-7438AC的最佳位置:

大约是在您现有的无线路由器/ AP和讯号死角之间的中

间区。建议您，讯号延伸器要可以从现有无线路由器/AP

接收到至少60％的讯号强度。

无线网卡/ 无

线桥接模式

EW-7438AC可透过网络线连接您的有线网络设备(如游

戏机或Smart TV)，做为无线网卡或无线网桥来使用。

建议架设EW-7438AC的最佳位置:

在无线讯号覆盖范围内、接近您有线网络装置的地方。

无线AP模式

EW-7438AC可透过网络线连接您现有的有线路由器，作

为无线AP来使用，让您的网络设备能透过它无线上网。

将EW-7438AC

插入靠近电源插座。

白光电源指示灯(

(

)在开机时会闪烁，待EW-7438AC开机完成，白光电源灯号

)将会转为恒亮状态。

请使用您的上网设备(如：电脑、平板或智能手机)搜寻SSID为

“

”的Wi-Fi无线讯号，并且与它联机。注: SSID末两

码”

**”

会依您的EW-7438AC而不同。

若您使用电脑联机，请先拔除网络线！

开启网络浏览器，(若您未被自动导引至下列”开始”窗口画面，请在网址列输入

)

请点选”开始”启动安装步骤。

若您无法连至，请先确认您的电脑是设定

为动态IP地址(进一步说明，请参考使用手册)

若您希望EW-7438AC做为无线讯号延伸器来使用，请您点选“Yes, I need a

Range Extender”。若您要选择其他操作模式，请点选左方选项“Change to a

Different Mode”。

请跟着画面指示完成安装您选择的模式设定。您可以设定本产品的2.4 GHz无线

或是5GHz无线。

在设定完成后，您可用行动装置扫描下图QR code(或联机密码卡上也有此QR

code)后，下载EdiRange app。透过EdiRange app，您可以管理控制本产品的

无线讯号开/关排程或者是无线讯号延伸器模式下的启动/关闭访客网络功能。

Android: iOS:

更多进阶设定，可前往网页式设定接

口中设定(

欲了解进一步说明，请参照使用手册)

III.

重置恢復出廠預設

如果您遭遇到本产品的使用问题或者您想要更改本

产品的操作模式，您可以将其重置为出厂设定。这

个动作会将所有设定都恢复成出厂默认值。

请按压WPS按键(至少10秒钟)直到白光电源

LED ()开始闪烁。

请稍待EW-7438AC重新启动。当白光电源

LED灯显示为恒亮，即表示EW-7438AC已可进

行设定。

IV.

WPS设定

若您的无线路由器/无线AP支持WPS (Wi-Fi Protected Setup)功能，那么您可以使

用此方式来快速设定EW-7438AC。

请按住无线路由器/无线AP上的WPS按键

约2秒钟，以启动WPS功能 (若非

EDIMAX品牌产品，WPS按钮的按压所需

时间，请参考其使用手册)

接着，请在两分钟内，按住EW-7438AC上

的WPS按键(约两秒)启动WPS联机功能。

此时EW-7438AC的

蓝色

WPS LED指示灯

会呈现闪烁状态，表示WPS联机功能正在

进行中。

当EW-7438AC的

蓝色

WPS LED灯号转为恒亮(恒亮状态会持续约30秒)，即

表示WPS联机已成功建立。

不论是2.4GHz或5GHz，您都可以使用WPS按键来建立无线联机。

本产品在5GHz讯号范围内下，默认会优先建立5GHz无线联机。而透

过iQ Setup，您可同时设定2.4GHz 及 5GHz无线讯号延伸。

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio technician for help.

FCC Caution

This device and its antenna must not be co-located or operating in conjunction with any other antenna or

transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation. Any changes or modifications not expressly

approved by the party responsible for compliance could void the authority to operate equipment.

Federal Communications Commission (FCC) Radiation Exposure Statement

This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In order to avoid

the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be

less than 20cm (8 inch) during normal operation.

The equipment version marketed in US is restricted to usage of the channels 1-11 only. This equipment is

restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range.

R&TTE Compliance Statement

This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND

THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal equipment and the mutual

recognition of their conformity (R&TTE). The R&TTE Directive repeals and replaces in the directive 98/13/EEC

(Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of April 8, 2000.

Safety

This equipment is designed with the utmost care for the safety of those who install and use it. However, special

attention must be paid to the dangers of electric shock and static electricity when working with electrical

equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to

ensure the safe use of the equipment.

EU Countries Intended for Use

The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Cyprus, Czech,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, and United Kingdom. The ETSI

version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and

Switzerland.

EU Countries Not Intended for Use

None

EU Declaration of Conformity

English: This equipment is in compliance with the essential requirements and other relevant

provisions of Directive 1999/5/EC, 2006/95/EC.

Français:

Cet équipement est conforme aux exigences essentielles et autres dispositions de la

directive 1999/5/CE, 2006/95/CE.

Čeština:

Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními

směrnic 1999/5/ES, 2006/95/ES.

Polski:

Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami

określonymi Dyrektywą UE 1999/5/EC, 2006/95/EC.

Română:

Acest echipament este în conformitate cu cerinţele esenţiale şi alte prevederi relevante ale

Directivei 1999/5/CE, 2006/95/CE.

Русский:

Это оборудование соответствует основным требованиям и положениям Директивы

1999/5/EC, 2006/95/EC.

Magyar:

Ez a berendezés megfelel az alapvető követelményeknek és más vonatkozó irányelveknek

(1999/5/EK, 2006/95/EK).

Türkçe:

Bu cihaz 1999/5/EC, 2006/95/EC direktifleri zorunlu istekler ve diğer hükümlerle ile

uyumludur.

Українська:

Обладнання відповідає вимогам і умовам директиви 1999/5/EC, 2006/95/EC.

Slovenčina:

Toto zariadenie spĺňa základné požiadavky a ďalšie príslušné ustanovenia smerníc

1999/5/ES, 2006/95/ES.

Deutsch:

Dieses Gerät erfüllt die Voraussetzungen gemäß den Richtlinien 1999/5/EC, 2006/95/EC.

Español:

El presente equipo cumple los requisitos esenciales de la Directiva 1999/5/EC, 2006/95/EC.

Italiano:

Questo apparecchio è conforme ai requisiti essenziali e alle altre disposizioni applicabili

della Direttiva 1999/5/CE, 2006/95/CE.

Nederlands:

Dit apparaat voldoet aan de essentiële eisen en andere van toepassing zijnde bepalingen

van richtlijn 1999/5/EC, 2006/95/EC.

Português:

Este equipamento cumpre os requesitos essênciais da Directiva 1999/5/EC, 2006/95/EC.

Norsk:

Dette utstyret er i samsvar med de viktigste kravene og andre relevante regler i Direktiv

1999/5/EC, 2006/95/EC.

Svenska:

Denna utrustning är i överensstämmelse med de väsentliga kraven och övriga relevanta

bestämmelser i direktiv 1999/5/EG, 2006/95/EG.

Dansk:

Dette udstyr er i overensstemmelse med de væsentligste krav og andre relevante

forordninger i direktiv 1999/5/EC, 2006/95/EC.

Suomi:

Tämä laite täyttää direktiivien 1999/5/EY, 2006/95/EY oleelliset vaatimukset ja muut

asiaankuuluvat määräykset.

WEEE Directive & Product Disposal

-----------------------------------------------------------------------------------------------------------------------

At the end of its serviceable life, this product should not be treated as household or general waste. It

should be handed over to the applicable collection point for the recycling of electrical and electronic

equipment, or returned to the supplier for disposal.

Declaration of Conformity

We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the

equipment described below complies with the requirements of the European R&TTE

directives.

Equipment: AC750 Wireless LAN Repeater

Model No.: EW-7438AC

The following European standards for essential requirements have been followed:

Directives 1999/5/EC

Spectrum : ETSI EN 300 328 V1.8.1 (2012-06);

ETSI EN 301 893 V1.7.1 (2012-06)

EMC : EN 301 489-1 V1.9.2 (2011-09);

EN 301 489-17 V2.2.1 (2012-09);

Safety (LVD) : IEC 60950-1:2005 (2

Edition);Am 1:2009

EN 60950-1:2006+A11:2009+A1:2010+A12:2011

Recommendation1999/5/EC

EMF : EN 62311:2008

Directives 2006/95/EC

Safety (LVD) : IEC 60950-1:2005 (2

Edition);Am 1:2009

EN 60950-1:2006+A11:2009+A1:2010+A12:2011

Edimax Technology Co., Ltd.

No. 3, Wu Chuan 3

Road,

Wu-Ku Industrial Park,

New Taipei City, Taiwan

Date of Signature: June, 2015

Signature:

Printed Name:

Title:

Albert Chang

Director

Edimax Technology Co., Ltd.

Notice According to GNU General Public License Version 2

This product includes software that is subject to the GNU General Public License version 2. The program is free software and

distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more

than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source

code.

GNU GENERAL PUBLIC LICENSE

Version 2, June 1991

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

Preamble

The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General

Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free

for all its users. This General Public License applies to most of the Free Software Foundation’s software and to any other

program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser

General Public License instead.) You can apply it to your programs, too.

When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make

sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive

source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that

you know you can do these things.

To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender

the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you

modify it.

For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights

that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms

so they know their rights.

We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal

permission to copy, distribute and/or modify the software.

Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for

this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they

have is not the original, so that any problems introduced by others will not reflect on the original authors’ reputations.

Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a

free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have

made it clear that any patent must be licensed for everyone’s free use or not licensed at all.

The precise terms and conditions for copying, distribution and modification follow.

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be

distributed under the terms of this General Public License. The ‘“Program’“, below, refers to any such program or work, and a

‘“work based on the Program’“ means either the Program or any derivative work under copyright law: that is to say, a work

containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language.

(Hereinafter, translation is included without limitation in the term ‘“modification’“.) Each licensee is addressed as ‘“you’“.

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The

act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a

work based on the Program (independent of having been made by running the Program). Whether that is true depends on

what the Program does.

1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that

you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep

intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the

Program a copy of this License along with the Program.

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in

exchange for a fee.

2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and

copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these

conditions:

a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any

change.

b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the

Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this

License.

c) If the modified program normally reads commands interactively when run, you must cause it, when started

running for such interactive use in the most ordinary way, to print or display an announcement including an

appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty)

and that users may redistribute the program under these conditions, and telling the user how to view a copy of

this License. (Exception: if the Program itself is interactive but does not normally print such an announcement,

your work based on the Program is not required to print an announcement.)

These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the

Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms,

do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as

part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License,

whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote

it.

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent

is to exercise the right to control the distribution of derivative or collective works based on the Program.

In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the

Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.

3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under

the terms of Sections 1 and 2 above provided that you also do one of the following:

a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under

the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,

b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than

your cost of physically performing source distribution, a complete machine-readable copy of the corresponding

source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for

software interchange; or,

c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This

alternative is allowed only for noncommercial distribution and only if you received the program in object code or

executable form with such an offer, in accord with Subsection b above.)

The source code for a work means the preferred form of the work for making modifications to it. For an executable work,

complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus

the scripts used to control compilation and installation of the executable. However, as a special exception, the source code

distributed need not include anything that is normally distributed (in either source or binary form) with the major

components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component

itself accompanies the executable.

If distribution of executable or object code is made by offering access to copy from a designated place, then offering

equivalent access to copy the source code from the same place counts as distribution of the source code, even though third

parties are not compelled to copy the source along with the object code.

4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any

attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights

under this License. However, parties who have received copies, or rights, from you under this License will not have their

licenses terminated so long as such parties remain in full compliance.

5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to

modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License.

Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of

this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.

6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license

from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not

impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing

compliance by third parties to this License.

7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent

issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of

this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy

simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not

distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by

all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License

would be to refrain entirely from distribution of the Program.

If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is

intended to apply and the section as a whole is intended to apply in other circumstances.

It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity

of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system,

which is implemented by public license practices. Many people have made generous contributions to the wide range of

software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to

decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.

8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces,

the original copyright holder who places the Program under this License may add an explicit geographical distribution

limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such

case, this License incorporates the limitation as if written in the body of this License.

9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time.

Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or

concerns.

Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies

to it and ‘“any later version’“, you have the option of following the terms and conditions either of that version or of any later

version published by the Free Software Foundation. If the Program does not specify a version number of this License, you

may choose any version ever published by the Free Software Foundation.

10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different,

write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the

Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of

preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software

generally.

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT

PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER

PARTIES PROVIDE THE PROGRAM ‘“AS IS’“ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE

ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE

DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY

OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR

DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR

INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE

OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER

PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.