2024年1月30日发(作者：乙康盛)
SM421详细说明介绍（三星官网介绍）
Advanced Flexible Mounter
Using the vision system which is upgraded from the
SM421 vision system, the SM421 can be applied to
parts from 0603 microchip to ∴22mm IC part
through On-The-Fly recognition.
It also allows recognition of parts with fine pitch
such as ∴55mm with 0.4mm pitch by adopting a
mega pixel vision system for the Stage camera.
It allows IC parts to be placed with high accuracy of
30 microns.
It also easily registers parts of complicated shape
by supporting the polygon recognition algorithm.
......................................................................... Features
.
.........................................................................
Throughput
.
......................................................................... Modularity
.
......................................................................... Simple & Easy
.
......................................................................... Software
......................................................................... Specification
➢ Features
➢ Throughput
The unique On-The-Fly image recognition technology of Samsung Techwin
own that allows part recognition without stopping after part pickup, minimizing
the time of movement between pickup position and placement position and
maximizing the placement speed by zeroing the recognition time.
• Placement Speed:
42,000 CPH (IPC9850),
51,000 CPH (Optimal Condition)
By adopting a dual work conveyor and shuttle inlet conveyor of first-in-firstout type, the PCB feeding type was
minimized and gantry efficiency is maximized due to elimination of a common work area, thus maximizing the
actual productivity. Each gantry can work at full speed independently without risk of interrupting the opposing
gantry. In addition, it supports various placement modes according to production characteristics and board size.
The twin servo system applied to each axis of the gantry structure allows high speed placement by
strong accelerating force.
• Equipped with self motion controller
• Reinforced rigidity of driving system
• Implementation of high acceleration and low vibration
• Reduced setting time
• Reinforced absolute accuracy and repetition accuracy
Chip ±50㎛ (Cpk≥1.0),
IC±30㎛ (Cpk≥1.0)
The newly upgraded placement accuracy calibration system automatically checks and calibrates the pickup point offset, head offset, C/V offset, etc.
to allow reliable part placement.
•Absolute Accuracy : ±50㎛(Cpk≥1)
➢ Modularity
It has an enhanced part registration library to allow quick part registration as well as stable part recognition and placement, and supports the polygon
recognition related to unregistered part to allow the parts of complicated shape to be registered easily.
The mega pixel camera allows the placement of parts from 0603(01005) micro chips. The SM400 series machine also allows recognition of larger
parts with fine pitch or balls using 45mm camera such as □42mm with 0.4mm pitch by adopting a mega pixel vision system for the Stage camera.
The SM Series dual-lane conveyor system accommodates PCBs up to 250mm, increasing the overall placement speed. The system can also
accommodate PCBs up to 460mm on a single-lane conveyor.
The highest productivity compared to the area of machine : 11,700 CPH/m2
➢ Simple & Easy
The height of the machine was lowered through ergonomic redesign and the operation panel and keyboard position were
optimized for convenient operation
Two operating consoles allow access to system controls from both the front and rear sides of the
machine.
All utility connections are installed inside the machine to provide a
clean and safe environment.
For the grease injection that is periodically performed during maintenance, the position of the nipple was considered for convenient grease injection.
Samsung’s optional IT Feeder System assures correct feeder positioning because it checks the replaced feeder locations every time a component is
loaded. The machine does not enter production mode when feeders are loaded incorrectly. It alerts the operator and provides easyto- follow
instructions for corrective action.
IT Feeder Features
Built-in CPU Board / Use of Device Net / Maintenance Record / Storage of Component No., Component Inventory, etc. / Component Shortage
Warning LED / Feeder Recognition / Confirmation
Feeder Placement Verification
Performs a changeover setup verification each time a feeder is reinserted. This feature saves valuable time and avoids costly rework due to
incorrect feeder positioning.
Remaining Component Quantity Alarm
Helps to ensure continuous system operations. This basic function of the IT Feeder System alerts the operator that a component supply needs to be
replenished, based on the remaining quantity.
Production Information Tracking / Recording Function
Automatically tracks and generates a record of production information, such as operation hours, program developer, operated equipment, worked
on components, etc.
A machine checking software that automatically warns the time required for maintenance of the machine.
Creates automatic placement routines on any number of machines in a production line, to configure the most productive
line balance for any environment or series of products.
The SM Series features built-in optimizer software to ensure exceptionally efficient machine operation. It
automatically configures the optimum feeder set-up and most efficient program sequence according to
user-defined priority conditions. This function minimizes changeover while maximizing machine runtime.
Top-quality accessories, such as non-stop tape feeders and non-stop tray feeders, increase overall system reliability and help significantly reduce
amount of machine downtime.
Non-Stop Tape Feeder
The new SM tape feeder employs an endless-discharge method of nonstop operation in delivering reliable,
repeatable, and efficient component pickups. Components supplied on tape can be reloaded easily while the
machine is running, ensuring smooth continuous system operation(SM Tape Feeder).
Non-Stop Tray Feeder
JEDEC tray cassettes are separated into upper and lower portions and can operate independently. Tray
components also can be reloaded while the machine is running, enabling consistent non-stop operation.
Side Tray Feeder
Entire JEDEC trays can be presented to the machine without any impact on PCB process width or available
feeder slot locations, allowing for direct pick-up from tray and maximum efficiency of feeder space.
Non-Stop Tape Splicing
Provide a continuous, steady supply of available components quickly and easily using a component tape connecting splicer.
Automatic Pickup Position Adjustment
SM Series systems perform real-time recognition of a component as it is picked up from the component feeder.
This feature provides the ability to automatically adjust the pickup position, ensuring that components are picked
up consistently at the center, regardless of tape variations.
Improved Accuracy
• High feeder base stability
• New mounting mechanism
• Two position-control pins at the front side
• Newly designed sprocket
Stable Indexing
• Built-in cylinder
• Optimized pressure control within the cylinder
• Increased pick-up speeds with the index sensor
• Tape guide automatically compensates for changes in tape thickness
• Variable tape support (for feeders accommodating tape widths of 12mm and higher)
Easy to Use
• Swing-type reel hanger (splicing/verification)
• Easy feeder identification by applying a different color for each
clamp (01005, 0201, 2p, 4p, 4E, general feeder)
• Ergonomic handle design
• Manual index switch (IT option)
• Power supply indication lamp illuminates when fixed by the clamp
• Tape guide lift prevention through the use of the control pin
Samsung’s Docking Feeder Cart System is the key to rapid changeover. A Docking Feeder Cart can be loaded offline, and then quickly rolled up to
the machine where it is pneumatically clamped to the feeder base. Both the front and rear sides of the SM Series machines are designed to
accommodate the Docking Feeder Cart System.
• Significantly reduce changeover time
• Replace carts without halting production
• Accommodates up to 56 8mm feeders per cart
• Automatically connects to feeder power and air supply
• Easily set the cart height using adjustable feet
Register up to 120 8mm feeders on one machine simultaneously. Concurrent optimizer support for 1 to 5
programs allows for multiple models to be arranged at the same time. The sliding-type feeder system
permits the user to remove and replace feeders during operation without interrupting the overall system.
The SM series can automatically generate a Job Change Order Sheet (feeder changeover report) while running production
in order to minimize setup time. This report identifies only the feeders that need to be changed, eliminating the need to
completely reload the machine.
The board transport system automatically adjusts to the precise board width in order to further
facilitate quick changeover.
SM Series systems use nozzles that are common to other Samsung SMT assembly systems, allowing for interchangeability and optimal line
balancing. With the increase in popularity of more delicate micro components, SM series systems have incorporated features to handle the demands
of such products, specifically using nozzles with compliant mechanisms in order to prevent component damage.
• Ceramic Nozzle • Bare Component Soft PAD Nozzle (Optional)
Feeder Types/Sizes
8mm (1005/0603)
8mm
12mm
16mm
24mm
32mm
44mm
56mm
72mm
88mm
Feeder Pitch(mm)
2
4
4, 8, 12
4, 8, 12
8, 12, 16, 20
8, 12, 16, 20, 24, 32
8, 12, 16, 20, 24, 32, 40
8, 12, 16, 20, 24, 32, 40
8, 12, 16, 20, 24, 32, 40
8, 12, 16, 20, 24, 32, 40
• Adjustable frequency control
• 24 VDC, 0.8A 0.8
• Maximum of four lanes
• Applicable components - SOP, SOJ, QFP, PLCC, connector, etc.
• Dual level magazine racks allow the component trays to be loaded while the machine is running
• Large capacity tray feeder for various odd-shaped components
• 20 Tray (1 Tray / 1 Pallet)
• 40 Tray (2 Tray / 1 Pallet)
•One-touch mounting allows the tray to be easily inserted and removed from feeder base.
• Flat tray installation surface enables high speed pickup.
• Multiple orientations, based on tray dimensions
• Applicable Trays : 2", 4", 136 x 316mm, 200 x 316mm, 272 x 316mm
• Type : Single-layer tray feeders (136 x 316mm) with 2 trays
Single-layer tray feeders (136 x 316mm) with 4 trays
Significantly reduce changeover time using the SM Series Docking Feeder Cart System. The system allows for replacing a complete feeder
configuration in just minutes.
Basic Set Configuration
• Docking Feeder Base
• Docking Cart
• Minimize the space required to store unused or staged SMfeeders
• SM feeder storage rack with 100 slots provides storage capacity for up to 100 SM
feeders (based on 8mm feeder)
• SM feeder storage rack with 20 slots and the Feeder Exchange JIG provides
storage capacity for up to 20 SMfeeders (based on 8mm feeder)
• Allows the user to replace tape reels in front of the machine, thus preventing
feeder damage and improving work efficiency
Provide a continuous, steady supply of available components to increase productivity and reduce machine downtime.
• Manual Tape Splicing Tool
• Portable Tape Splicing Tool
• Performs the tape connecting function that guarantees high quality by moving the tool in front of the machine.
Verify and adjust the feeder tape pocket position with the SM Series Feeder Calibration JIG as part of a scheduled
system maintenance program to ensure reliable component pickups.
Use the tape cutter to automatically cut used paper and plastic tape.
• Non-Docking • Docking Cart
➢ Software
To prevent inaccurate component placements, the SM Series systems verify that the expected component feeders
are indeed in the required locations. The verification is performed using barcode information that is obtained from
the feeder and component when they are installed on the system. The operator is notified of any incorrectly
mounted feeder or component before production begins.
• Stops operation after an error occurs if incorrect placement happens.
• Alerts the operator when corrective action is required.
Monitor real-time component inventory with barcode labels attached to the supply reels. Stock levels can be
monitored once the reel is assigned to a SM IT Feeder. Monitoring component consumption using the common
database allows the operator to replenish the system before the stock becomes depleted.
Automatic Recognition
Each feeder has a unique identifier (ID) used to provide information about the feeder and component. Simply pressing a button automatically
causes the feeder information to be registered with the control system.
Advanced SM Series IT Feeder Functions
Each SM IT feeder has a built-in CPU and memory that are used to store component information and maintenance history. Multicolor LEDs
indicators provide the feeder status for easy identification of the feeder condition, allowing operators to easily monitor production progress at a
glance.
Shared Database
A common database stores information concerning the feeders, components, machines, and information on each job in real-time.
The component shortage warning feature prevent component shortages in real-time during machine operation. This
feature minimizes machine downtime by permitting the operator to replenish components in advance so as to not
impact production.
• Monitor remaining quantity for each component tape reel
• Alert the user that a component shortage is imminent
Load components onto the SM IT feeders using offline stations that are connected to the shared database. Assign components
to specific feeders to reduce changeover time, and further ensure accuracy using the built-in barcode system.
• Minimize setup time using the Docking Feeder Cart
• Verify feeder and component setup prior to operation using OLP changeover reports
Lot Tracking, which is one of the options of IT Feeder System, traces and manages the history of the parts that were
used when producing boards. It minimizes the range of recall by using the LOT Tracking history file if an external
error occurs, and it helps to easily cope with an error that occurs while the machine is running. Lot Tracking data
also can be integrated with the modules of TUIC Co., to manage the history in SMD IN-LINE.
The CAD data, ASCII data, and the placement information on the program of the machine made by other
companies can be changed accurately and easily and they can be verified using Gerber file. In addition, the
work program can be easily changed in the line by readjusting the actual line balance results of existing job
files. Furthermore, it is possible to check the improvement result.
It is possible to manage one integrated DB for each line through the network and perform work program
management by line. Using the EasyOLP exclusively used for the line, the work program can be downloaded
to each machine and the data and job files can be managed by automatically uploading the modified work
program information, allowing reduction of work preparation time and easy work change.
It is possible to monitor various production indexes and work status as well as detail information of the
machine and improve the operation rate and the defect rate of the line by providing the function that tracks an
error when it occurs.
It is possible to perform management of each user through registration of each line, equipment and users, and provide support to achieve quick
production by outputting various reports. In addition, it is possible to create a program to allow multi-board and multi-work and predict actual
working hours.
➢ Specification
2024年1月30日发(作者：乙康盛)
SM421详细说明介绍（三星官网介绍）
Advanced Flexible Mounter
Using the vision system which is upgraded from the
SM421 vision system, the SM421 can be applied to
parts from 0603 microchip to ∴22mm IC part
through On-The-Fly recognition.
It also allows recognition of parts with fine pitch
such as ∴55mm with 0.4mm pitch by adopting a
mega pixel vision system for the Stage camera.
It allows IC parts to be placed with high accuracy of
30 microns.
It also easily registers parts of complicated shape
by supporting the polygon recognition algorithm.
......................................................................... Features
.
.........................................................................
Throughput
.
......................................................................... Modularity
.
......................................................................... Simple & Easy
.
......................................................................... Software
......................................................................... Specification
➢ Features
➢ Throughput
The unique On-The-Fly image recognition technology of Samsung Techwin
own that allows part recognition without stopping after part pickup, minimizing
the time of movement between pickup position and placement position and
maximizing the placement speed by zeroing the recognition time.
• Placement Speed:
42,000 CPH (IPC9850),
51,000 CPH (Optimal Condition)
By adopting a dual work conveyor and shuttle inlet conveyor of first-in-firstout type, the PCB feeding type was
minimized and gantry efficiency is maximized due to elimination of a common work area, thus maximizing the
actual productivity. Each gantry can work at full speed independently without risk of interrupting the opposing
gantry. In addition, it supports various placement modes according to production characteristics and board size.
The twin servo system applied to each axis of the gantry structure allows high speed placement by
strong accelerating force.
• Equipped with self motion controller
• Reinforced rigidity of driving system
• Implementation of high acceleration and low vibration
• Reduced setting time
• Reinforced absolute accuracy and repetition accuracy
Chip ±50㎛ (Cpk≥1.0),
IC±30㎛ (Cpk≥1.0)
The newly upgraded placement accuracy calibration system automatically checks and calibrates the pickup point offset, head offset, C/V offset, etc.
to allow reliable part placement.
•Absolute Accuracy : ±50㎛(Cpk≥1)
➢ Modularity
It has an enhanced part registration library to allow quick part registration as well as stable part recognition and placement, and supports the polygon
recognition related to unregistered part to allow the parts of complicated shape to be registered easily.
The mega pixel camera allows the placement of parts from 0603(01005) micro chips. The SM400 series machine also allows recognition of larger
parts with fine pitch or balls using 45mm camera such as □42mm with 0.4mm pitch by adopting a mega pixel vision system for the Stage camera.
The SM Series dual-lane conveyor system accommodates PCBs up to 250mm, increasing the overall placement speed. The system can also
accommodate PCBs up to 460mm on a single-lane conveyor.
The highest productivity compared to the area of machine : 11,700 CPH/m2
➢ Simple & Easy
The height of the machine was lowered through ergonomic redesign and the operation panel and keyboard position were
optimized for convenient operation
Two operating consoles allow access to system controls from both the front and rear sides of the
machine.
All utility connections are installed inside the machine to provide a
clean and safe environment.
For the grease injection that is periodically performed during maintenance, the position of the nipple was considered for convenient grease injection.
Samsung’s optional IT Feeder System assures correct feeder positioning because it checks the replaced feeder locations every time a component is
loaded. The machine does not enter production mode when feeders are loaded incorrectly. It alerts the operator and provides easyto- follow
instructions for corrective action.
IT Feeder Features
Built-in CPU Board / Use of Device Net / Maintenance Record / Storage of Component No., Component Inventory, etc. / Component Shortage
Warning LED / Feeder Recognition / Confirmation
Feeder Placement Verification
Performs a changeover setup verification each time a feeder is reinserted. This feature saves valuable time and avoids costly rework due to
incorrect feeder positioning.
Remaining Component Quantity Alarm
Helps to ensure continuous system operations. This basic function of the IT Feeder System alerts the operator that a component supply needs to be
replenished, based on the remaining quantity.
Production Information Tracking / Recording Function
Automatically tracks and generates a record of production information, such as operation hours, program developer, operated equipment, worked
on components, etc.
A machine checking software that automatically warns the time required for maintenance of the machine.
Creates automatic placement routines on any number of machines in a production line, to configure the most productive
line balance for any environment or series of products.
The SM Series features built-in optimizer software to ensure exceptionally efficient machine operation. It
automatically configures the optimum feeder set-up and most efficient program sequence according to
user-defined priority conditions. This function minimizes changeover while maximizing machine runtime.
Top-quality accessories, such as non-stop tape feeders and non-stop tray feeders, increase overall system reliability and help significantly reduce
amount of machine downtime.
Non-Stop Tape Feeder
The new SM tape feeder employs an endless-discharge method of nonstop operation in delivering reliable,
repeatable, and efficient component pickups. Components supplied on tape can be reloaded easily while the
machine is running, ensuring smooth continuous system operation(SM Tape Feeder).
Non-Stop Tray Feeder
JEDEC tray cassettes are separated into upper and lower portions and can operate independently. Tray
components also can be reloaded while the machine is running, enabling consistent non-stop operation.
Side Tray Feeder
Entire JEDEC trays can be presented to the machine without any impact on PCB process width or available
feeder slot locations, allowing for direct pick-up from tray and maximum efficiency of feeder space.
Non-Stop Tape Splicing
Provide a continuous, steady supply of available components quickly and easily using a component tape connecting splicer.
Automatic Pickup Position Adjustment
SM Series systems perform real-time recognition of a component as it is picked up from the component feeder.
This feature provides the ability to automatically adjust the pickup position, ensuring that components are picked
up consistently at the center, regardless of tape variations.
Improved Accuracy
• High feeder base stability
• New mounting mechanism
• Two position-control pins at the front side
• Newly designed sprocket
Stable Indexing
• Built-in cylinder
• Optimized pressure control within the cylinder
• Increased pick-up speeds with the index sensor
• Tape guide automatically compensates for changes in tape thickness
• Variable tape support (for feeders accommodating tape widths of 12mm and higher)
Easy to Use
• Swing-type reel hanger (splicing/verification)
• Easy feeder identification by applying a different color for each
clamp (01005, 0201, 2p, 4p, 4E, general feeder)
• Ergonomic handle design
• Manual index switch (IT option)
• Power supply indication lamp illuminates when fixed by the clamp
• Tape guide lift prevention through the use of the control pin
Samsung’s Docking Feeder Cart System is the key to rapid changeover. A Docking Feeder Cart can be loaded offline, and then quickly rolled up to
the machine where it is pneumatically clamped to the feeder base. Both the front and rear sides of the SM Series machines are designed to
accommodate the Docking Feeder Cart System.
• Significantly reduce changeover time
• Replace carts without halting production
• Accommodates up to 56 8mm feeders per cart
• Automatically connects to feeder power and air supply
• Easily set the cart height using adjustable feet
Register up to 120 8mm feeders on one machine simultaneously. Concurrent optimizer support for 1 to 5
programs allows for multiple models to be arranged at the same time. The sliding-type feeder system
permits the user to remove and replace feeders during operation without interrupting the overall system.
The SM series can automatically generate a Job Change Order Sheet (feeder changeover report) while running production
in order to minimize setup time. This report identifies only the feeders that need to be changed, eliminating the need to
completely reload the machine.
The board transport system automatically adjusts to the precise board width in order to further
facilitate quick changeover.
SM Series systems use nozzles that are common to other Samsung SMT assembly systems, allowing for interchangeability and optimal line
balancing. With the increase in popularity of more delicate micro components, SM series systems have incorporated features to handle the demands
of such products, specifically using nozzles with compliant mechanisms in order to prevent component damage.
• Ceramic Nozzle • Bare Component Soft PAD Nozzle (Optional)
Feeder Types/Sizes
8mm (1005/0603)
8mm
12mm
16mm
24mm
32mm
44mm
56mm
72mm
88mm
Feeder Pitch(mm)
2
4
4, 8, 12
4, 8, 12
8, 12, 16, 20
8, 12, 16, 20, 24, 32
8, 12, 16, 20, 24, 32, 40
8, 12, 16, 20, 24, 32, 40
8, 12, 16, 20, 24, 32, 40
8, 12, 16, 20, 24, 32, 40
• Adjustable frequency control
• 24 VDC, 0.8A 0.8
• Maximum of four lanes
• Applicable components - SOP, SOJ, QFP, PLCC, connector, etc.
• Dual level magazine racks allow the component trays to be loaded while the machine is running
• Large capacity tray feeder for various odd-shaped components
• 20 Tray (1 Tray / 1 Pallet)
• 40 Tray (2 Tray / 1 Pallet)
•One-touch mounting allows the tray to be easily inserted and removed from feeder base.
• Flat tray installation surface enables high speed pickup.
• Multiple orientations, based on tray dimensions
• Applicable Trays : 2", 4", 136 x 316mm, 200 x 316mm, 272 x 316mm
• Type : Single-layer tray feeders (136 x 316mm) with 2 trays
Single-layer tray feeders (136 x 316mm) with 4 trays
Significantly reduce changeover time using the SM Series Docking Feeder Cart System. The system allows for replacing a complete feeder
configuration in just minutes.
Basic Set Configuration
• Docking Feeder Base
• Docking Cart
• Minimize the space required to store unused or staged SMfeeders
• SM feeder storage rack with 100 slots provides storage capacity for up to 100 SM
feeders (based on 8mm feeder)
• SM feeder storage rack with 20 slots and the Feeder Exchange JIG provides
storage capacity for up to 20 SMfeeders (based on 8mm feeder)
• Allows the user to replace tape reels in front of the machine, thus preventing
feeder damage and improving work efficiency
Provide a continuous, steady supply of available components to increase productivity and reduce machine downtime.
• Manual Tape Splicing Tool
• Portable Tape Splicing Tool
• Performs the tape connecting function that guarantees high quality by moving the tool in front of the machine.
Verify and adjust the feeder tape pocket position with the SM Series Feeder Calibration JIG as part of a scheduled
system maintenance program to ensure reliable component pickups.
Use the tape cutter to automatically cut used paper and plastic tape.
• Non-Docking • Docking Cart
➢ Software
To prevent inaccurate component placements, the SM Series systems verify that the expected component feeders
are indeed in the required locations. The verification is performed using barcode information that is obtained from
the feeder and component when they are installed on the system. The operator is notified of any incorrectly
mounted feeder or component before production begins.
• Stops operation after an error occurs if incorrect placement happens.
• Alerts the operator when corrective action is required.
Monitor real-time component inventory with barcode labels attached to the supply reels. Stock levels can be
monitored once the reel is assigned to a SM IT Feeder. Monitoring component consumption using the common
database allows the operator to replenish the system before the stock becomes depleted.
Automatic Recognition
Each feeder has a unique identifier (ID) used to provide information about the feeder and component. Simply pressing a button automatically
causes the feeder information to be registered with the control system.
Advanced SM Series IT Feeder Functions
Each SM IT feeder has a built-in CPU and memory that are used to store component information and maintenance history. Multicolor LEDs
indicators provide the feeder status for easy identification of the feeder condition, allowing operators to easily monitor production progress at a
glance.
Shared Database
A common database stores information concerning the feeders, components, machines, and information on each job in real-time.
The component shortage warning feature prevent component shortages in real-time during machine operation. This
feature minimizes machine downtime by permitting the operator to replenish components in advance so as to not
impact production.
• Monitor remaining quantity for each component tape reel
• Alert the user that a component shortage is imminent
Load components onto the SM IT feeders using offline stations that are connected to the shared database. Assign components
to specific feeders to reduce changeover time, and further ensure accuracy using the built-in barcode system.
• Minimize setup time using the Docking Feeder Cart
• Verify feeder and component setup prior to operation using OLP changeover reports
Lot Tracking, which is one of the options of IT Feeder System, traces and manages the history of the parts that were
used when producing boards. It minimizes the range of recall by using the LOT Tracking history file if an external
error occurs, and it helps to easily cope with an error that occurs while the machine is running. Lot Tracking data
also can be integrated with the modules of TUIC Co., to manage the history in SMD IN-LINE.
The CAD data, ASCII data, and the placement information on the program of the machine made by other
companies can be changed accurately and easily and they can be verified using Gerber file. In addition, the
work program can be easily changed in the line by readjusting the actual line balance results of existing job
files. Furthermore, it is possible to check the improvement result.
It is possible to manage one integrated DB for each line through the network and perform work program
management by line. Using the EasyOLP exclusively used for the line, the work program can be downloaded
to each machine and the data and job files can be managed by automatically uploading the modified work
program information, allowing reduction of work preparation time and easy work change.
It is possible to monitor various production indexes and work status as well as detail information of the
machine and improve the operation rate and the defect rate of the line by providing the function that tracks an
error when it occurs.
It is possible to perform management of each user through registration of each line, equipment and users, and provide support to achieve quick
production by outputting various reports. In addition, it is possible to create a program to allow multi-board and multi-work and predict actual
working hours.
➢ Specification