2024年3月3日发(作者：聊黎昕)

ATN 905 Product BrochureHUAWEI TECHNOLOGIES CO., LTD.

Product OverviewDesigned for EDD and Small-cell Mobile backhaul scenarios, ATN 905 Series is the smallest case-shaped equipment in industry. Its size is

just the same as an IPad, but its capacity is 6G, and it owns many leading functions such as high-quality SLA, fast fault demarcation, perfect

clock synchronization, simple configuration and low power consumption. In addition, both AC and DC are supplied. So it can be flexibly

installed in various indoor and outdoor 905; ACATN 905; DCATN 905-V; ACATN 905-E; ACATN 905-C; ACIndoor SeriesGE/FE(o/e/combo)GE/FE(o/e/combo)1xVDSL2; GE/FE(o/e/combo)4xE1; GE/FE(o/e)Supports CPE; GE/FE(o/e/combo)Outdoor SeriesATN 905A; ACATN 905A-P; ACATN 905A-V; ACATN 905A-D; DCATN 905A-C; DCIPAD SizeGE/FE(o/combo)Supports 3 PoE; GE/FE(o/e/combo)VDSL2; GE/FE(e)Supports 4 PoE; GE/FE(e)Supports 3 PoE; GE/FE(o/e/combo)ATN905 Products AppearanceNetwork PositionCo-LocationCo-LocationAccess layerAGG layerSmall cellIP RAN /ATN905CPEBranch officeATN905RNC/BSCMetro Provider’sIP RANNEEnterpriseCPEATN905NetworkSmall cellATN 950BATN905CPEBranch officeATN910BPre-AGGMME/S-GW2G/3G/LTEATN 905 EDD ScenariosATN 905 Small cell Bearer ScenariosProduct Feature• Any Where Installed: As IP65 level protection and -40°C ~ +65°C width temperature thresholds range are supported, ATN 905A

outdoor series can be flexibly installed anywhere such as a pole, a wall, an outdoor cabinets and so on. ATN 905 indoor series meets the

demands of the indoor environment because it supports nature heat dissipation, zero noise, low power consumption and Temperature rangeOutdoor cabinetIndoorNature heat dissipation, 0 noiseAny Where Installed

• Plug and Play, Highly Effective Deployment: No need for manual planning. ATN 905 series supports one time site visit and plug-and-play, replace-and-play. Remote configuration can realize services fast provisioning within 5 minutes; U2000 NMS can automatically

record the configuration of fault device and load it to the new ATN device when the new ATN is online. With the design of Built-in test

packet generator (compliant with RFC2544), it is tester free for the service RSGU2000PEPPELCT/CLIAcc. ringAGG ringloopbackknil

P1、Establish PPP link, established OSPF

PP neighbor and release host routing;PEPPE2、ATNs be identified on U2000;3、Download script to ATNATN SeriesPlug and PlayTester Free• Comprehensive Clock Synchronization Solution: ATN 905 Series supports IEEE1588v2 OC, BC and TC all mode, 1588 ACR, E1 line

clock and Synchronous Ethernet, perfectly solving the problems of high precision clock synchronization and clock recovery. So, it fulfills

the clock synchronization requirement of evolution in long run and reduces investment on GPS and BITS.• Powerful Performance Statistics: ATN 905 series has the hardware-OAM capability. 3.3ms packet interval ensures the fault be detected as

fast as possible and services be switched within 50ms. It supports multiple OAM protocols (Y.1731, Y.1564, BFD over everything, TWAMP and

RFC2544 etc.). And, via collecting and detecting real-time services performances, the quality status of the whole network is open-and-shut.• Self-developed chips, Service Demand and Dynamic: Based on Huawei self-study network processor NP chips, with its flexible fully

programmable architecture, new services can be achieved by microcode programming, so customers do not need to replace the NE

hardware, saving equipment investment cost.• Dying gasp, Rapid Fault Location: ATN 905 series supports dying gasp function. When a power outage occurs, a dying gasp alarm

will be sent to NMS. It makes the customers locate the error rapidly and reduce the whole time of processing the fault.• SDN-Based Software Architecture, Simplified O&M: Based on SDH software architecture, faced application, ATN 905 series supplies

standard north API and south API to realize new service rapid innovation. The separation of controlling plane and forwarding plane

makes the disperse devices unified managed and service deployment decoupled from forwarding t SpecificationAttributeATN905 (AC/DC)ATN905-VATN905-EATN905-CSwitching Capacity6Gbps6Gbps6Gbps6Gbps2*GE/FE (Combo),1*VDSL2Interfce Type2*GE/FE(o),2*GE/FE (Combo),4*E12*FE/GE (Combo)2*GE/FE(e)2*GE/FE(o),2*GE/FE(o)2*FE/GE(o)2*GE/FE(e)2*GE/FE(e),2*FE/GE(e)PowerAC: 90V ~ 260VDC: -38.4V ~ -72.0VAC: 90V ~ 260VAC: 90V ~ 260VAC: 90V ~ 260VTypical power consumption15WFull equipped weight1.81kgDimension (W×D×H)250mm×180mm×43.6mm(1U)Operating Temperature-40°C to +65°C(-20°C to +50°C for ATN 905-V, -5°C to +55°C for ATN 905-E)heat dissipationnature heat dissipationhumidity5% RH ~ 95% RH, non-condensing.

Outdoor Series:AttributeATN905AATN905A-PATN905A-VATN905A-CATN905A-DForwarding Performance

with Service(IMIX)6Gbps4Gbps4.1Gbps4Gbps6Gbps2*GE/FE (Combo),1*GE/FE (Combo),1*GE/FE (Combo),Interface Type2*GE/FE(o)2*GE/FE(e),1*VDSL22*GE(o)1*GE(o)4*GE/FE(e),2*GE/FE(e),5*FE/GE(E)1*GE(o)PowerAC: 90V ~ 260VAC: 90V ~ 260VAC: 90V ~ 260VDC: -72V ~ -38.4V DC: -72V ~ -38.4VPOE/1 port supplies 130W POE;2 ports share 60W POE;/1 port supplies 130W POE;4ports with POE;2 ports share 60W POE;Max 60W POE per port;Typical power consumption15W210W with POE15W210W with POE180W with POEFull equipped weight2.7kg2.9kg2.8kg2.9kg2.9kgDimension (W×D×H) 250mm×180mm ×52mm250mm×180mm ×52mm300mm×135mm ×60mm 250mm×180mm ×52mm250mm×180mm ×52mmOperating Temperature-40°C to +65°C-40°C to +55°C-40°C to +65°C-40°C to +55°C-40°C to +55°Cheat dissipationNature heat dissipationhumidity5% RH ~ 95% RH, non-condensingSoftware FeatureL2 Feature• Support IEEE802.1q, IEEE802.1p, IEEE 802.3ad, IEEE 802.1ab• Support STP/RSTP/MSTP, VLAN Switch, G.8032• Support IPv4, IPv6, OSPFv2/V3, RIPv2, and IS-IS/IS-ISv6, BGPv4/BGPV4+, IPv6 ACL/Telnet, 6VP and static routeL3 Feature• Support dynamic ARP and static ARP table entries• Support VLAN IF

QoS• Support WRED, H-QoS with 3 levels, VLL/PWE3 QoS, Access Network QoS ControlNetwork Reliability• Support IP FRR, NQA, BFD for IGP, Ipv4• Support IEEE802ag, IEEE802.3AH, ITU-T Y.1731, Dying gaspSecurity• Support PPPOE• Support static and dynamic MAC address bonding• Support ETH OAM (EFM, CFM)OAM• Support BFD• Support RFC 2544, Y.1564• Support TWAMP(server/reflector)Clock• Support 1588V2, Synchronous Ethernet•

Support 1588 ACR (only ATN 905A)O&M• DHCP Plug & Play

• DCN Plug & PlayLightning Proof• 6KVIP Shield• IP65Copyright © Huawei Technologies Co., Ltd. 2015. All rights part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., ark Notice , HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., trademarks, product, service and company names mentioned are the property of their respective l DisclaimerHUAWEI TECHNOLOGIES CO., information in this document may contain predictive statements including,

Huawei Industrial Basewithout limitation, statements regarding the future financial and operating results,

Bantian Longgangfuture product portfolio, new technology, etc. There are a number of factors

Shenzhen 518129, P.R. Chinathat could cause actual results and developments to differ materially from those

Tel: +86-755-28780808expressed or implied in the predictive statements. Therefore, such information

Version No.: M3-028710-20150325-C-1.0is provided for reference purpose only and constitutes neither an offer nor an

acceptance. Huawei may change the information at any time without notice.

2024年3月3日发(作者：聊黎昕)

ATN 905 Product BrochureHUAWEI TECHNOLOGIES CO., LTD.

Product OverviewDesigned for EDD and Small-cell Mobile backhaul scenarios, ATN 905 Series is the smallest case-shaped equipment in industry. Its size is

just the same as an IPad, but its capacity is 6G, and it owns many leading functions such as high-quality SLA, fast fault demarcation, perfect

clock synchronization, simple configuration and low power consumption. In addition, both AC and DC are supplied. So it can be flexibly

installed in various indoor and outdoor 905; ACATN 905; DCATN 905-V; ACATN 905-E; ACATN 905-C; ACIndoor SeriesGE/FE(o/e/combo)GE/FE(o/e/combo)1xVDSL2; GE/FE(o/e/combo)4xE1; GE/FE(o/e)Supports CPE; GE/FE(o/e/combo)Outdoor SeriesATN 905A; ACATN 905A-P; ACATN 905A-V; ACATN 905A-D; DCATN 905A-C; DCIPAD SizeGE/FE(o/combo)Supports 3 PoE; GE/FE(o/e/combo)VDSL2; GE/FE(e)Supports 4 PoE; GE/FE(e)Supports 3 PoE; GE/FE(o/e/combo)ATN905 Products AppearanceNetwork PositionCo-LocationCo-LocationAccess layerAGG layerSmall cellIP RAN /ATN905CPEBranch officeATN905RNC/BSCMetro Provider’sIP RANNEEnterpriseCPEATN905NetworkSmall cellATN 950BATN905CPEBranch officeATN910BPre-AGGMME/S-GW2G/3G/LTEATN 905 EDD ScenariosATN 905 Small cell Bearer ScenariosProduct Feature• Any Where Installed: As IP65 level protection and -40°C ~ +65°C width temperature thresholds range are supported, ATN 905A

outdoor series can be flexibly installed anywhere such as a pole, a wall, an outdoor cabinets and so on. ATN 905 indoor series meets the

demands of the indoor environment because it supports nature heat dissipation, zero noise, low power consumption and Temperature rangeOutdoor cabinetIndoorNature heat dissipation, 0 noiseAny Where Installed

• Plug and Play, Highly Effective Deployment: No need for manual planning. ATN 905 series supports one time site visit and plug-and-play, replace-and-play. Remote configuration can realize services fast provisioning within 5 minutes; U2000 NMS can automatically

record the configuration of fault device and load it to the new ATN device when the new ATN is online. With the design of Built-in test

packet generator (compliant with RFC2544), it is tester free for the service RSGU2000PEPPELCT/CLIAcc. ringAGG ringloopbackknil

P1、Establish PPP link, established OSPF

PP neighbor and release host routing;PEPPE2、ATNs be identified on U2000;3、Download script to ATNATN SeriesPlug and PlayTester Free• Comprehensive Clock Synchronization Solution: ATN 905 Series supports IEEE1588v2 OC, BC and TC all mode, 1588 ACR, E1 line

clock and Synchronous Ethernet, perfectly solving the problems of high precision clock synchronization and clock recovery. So, it fulfills

the clock synchronization requirement of evolution in long run and reduces investment on GPS and BITS.• Powerful Performance Statistics: ATN 905 series has the hardware-OAM capability. 3.3ms packet interval ensures the fault be detected as

fast as possible and services be switched within 50ms. It supports multiple OAM protocols (Y.1731, Y.1564, BFD over everything, TWAMP and

RFC2544 etc.). And, via collecting and detecting real-time services performances, the quality status of the whole network is open-and-shut.• Self-developed chips, Service Demand and Dynamic: Based on Huawei self-study network processor NP chips, with its flexible fully

programmable architecture, new services can be achieved by microcode programming, so customers do not need to replace the NE

hardware, saving equipment investment cost.• Dying gasp, Rapid Fault Location: ATN 905 series supports dying gasp function. When a power outage occurs, a dying gasp alarm

will be sent to NMS. It makes the customers locate the error rapidly and reduce the whole time of processing the fault.• SDN-Based Software Architecture, Simplified O&M: Based on SDH software architecture, faced application, ATN 905 series supplies

standard north API and south API to realize new service rapid innovation. The separation of controlling plane and forwarding plane

makes the disperse devices unified managed and service deployment decoupled from forwarding t SpecificationAttributeATN905 (AC/DC)ATN905-VATN905-EATN905-CSwitching Capacity6Gbps6Gbps6Gbps6Gbps2*GE/FE (Combo),1*VDSL2Interfce Type2*GE/FE(o),2*GE/FE (Combo),4*E12*FE/GE (Combo)2*GE/FE(e)2*GE/FE(o),2*GE/FE(o)2*FE/GE(o)2*GE/FE(e)2*GE/FE(e),2*FE/GE(e)PowerAC: 90V ~ 260VDC: -38.4V ~ -72.0VAC: 90V ~ 260VAC: 90V ~ 260VAC: 90V ~ 260VTypical power consumption15WFull equipped weight1.81kgDimension (W×D×H)250mm×180mm×43.6mm(1U)Operating Temperature-40°C to +65°C(-20°C to +50°C for ATN 905-V, -5°C to +55°C for ATN 905-E)heat dissipationnature heat dissipationhumidity5% RH ~ 95% RH, non-condensing.

Outdoor Series:AttributeATN905AATN905A-PATN905A-VATN905A-CATN905A-DForwarding Performance

with Service(IMIX)6Gbps4Gbps4.1Gbps4Gbps6Gbps2*GE/FE (Combo),1*GE/FE (Combo),1*GE/FE (Combo),Interface Type2*GE/FE(o)2*GE/FE(e),1*VDSL22*GE(o)1*GE(o)4*GE/FE(e),2*GE/FE(e),5*FE/GE(E)1*GE(o)PowerAC: 90V ~ 260VAC: 90V ~ 260VAC: 90V ~ 260VDC: -72V ~ -38.4V DC: -72V ~ -38.4VPOE/1 port supplies 130W POE;2 ports share 60W POE;/1 port supplies 130W POE;4ports with POE;2 ports share 60W POE;Max 60W POE per port;Typical power consumption15W210W with POE15W210W with POE180W with POEFull equipped weight2.7kg2.9kg2.8kg2.9kg2.9kgDimension (W×D×H) 250mm×180mm ×52mm250mm×180mm ×52mm300mm×135mm ×60mm 250mm×180mm ×52mm250mm×180mm ×52mmOperating Temperature-40°C to +65°C-40°C to +55°C-40°C to +65°C-40°C to +55°C-40°C to +55°Cheat dissipationNature heat dissipationhumidity5% RH ~ 95% RH, non-condensingSoftware FeatureL2 Feature• Support IEEE802.1q, IEEE802.1p, IEEE 802.3ad, IEEE 802.1ab• Support STP/RSTP/MSTP, VLAN Switch, G.8032• Support IPv4, IPv6, OSPFv2/V3, RIPv2, and IS-IS/IS-ISv6, BGPv4/BGPV4+, IPv6 ACL/Telnet, 6VP and static routeL3 Feature• Support dynamic ARP and static ARP table entries• Support VLAN IF

QoS• Support WRED, H-QoS with 3 levels, VLL/PWE3 QoS, Access Network QoS ControlNetwork Reliability• Support IP FRR, NQA, BFD for IGP, Ipv4• Support IEEE802ag, IEEE802.3AH, ITU-T Y.1731, Dying gaspSecurity• Support PPPOE• Support static and dynamic MAC address bonding• Support ETH OAM (EFM, CFM)OAM• Support BFD• Support RFC 2544, Y.1564• Support TWAMP(server/reflector)Clock• Support 1588V2, Synchronous Ethernet•

Support 1588 ACR (only ATN 905A)O&M• DHCP Plug & Play

• DCN Plug & PlayLightning Proof• 6KVIP Shield• IP65Copyright © Huawei Technologies Co., Ltd. 2015. All rights part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., ark Notice , HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., trademarks, product, service and company names mentioned are the property of their respective l DisclaimerHUAWEI TECHNOLOGIES CO., information in this document may contain predictive statements including,

Huawei Industrial Basewithout limitation, statements regarding the future financial and operating results,

Bantian Longgangfuture product portfolio, new technology, etc. There are a number of factors

Shenzhen 518129, P.R. Chinathat could cause actual results and developments to differ materially from those

Tel: +86-755-28780808expressed or implied in the predictive statements. Therefore, such information

Version No.: M3-028710-20150325-C-1.0is provided for reference purpose only and constitutes neither an offer nor an

acceptance. Huawei may change the information at any time without notice.