2024年3月12日发(作者：楚芊丽)
ESC/VP21 Command User’s Guide for
Home Projector
Table of Contents
Introduction to ESC/VP21- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3
ESC/VP21 Command Formats- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
Applicable Models - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5
Command Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5
Appendix - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8
Copyright Notice:
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. No
patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting
from the use of the information contained herein.
Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses,
costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications,
repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with SEIKO EPSON CORPORATION’s operating and
maintenance instructions.
SEIKO EPSON CORPORATION shall not be liable against any damages or problems arising from the use of any options or any consumable
products other than those designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION.
EPSON is a registered trademark of SEIKO EPSON CORPORATION. EasyMP is a trademark of SEIKO EPSON CORPORATION. Macin-
tosh, Mac, and iMac are registered trademarks of Apple Computer, Inc. IBM is a registered trademark of International Business Machines
Corporation. Windows and Windows NT are registered trademarks of Microsoft Corporation in the United States of America.
General Notice:
Other product names used herein are also for identification purposes only and may be trademarks of their respective owners. EPSON disclaims
any and all rights in those marks.
©SEIKO EPSON CORPORATION 2003-2005. All rights reserved.
uction to ESC/VP21
ESC/VP21 is a control command and protocol for Epson projectors, which is used for A/V controller to control and monitor Epson projectors.
The command codes are comprised of ASCII codes. Therefore the command codes can be understood very easily and you can easily control
projectors using a PC with a terminal emulator such as Microsoft Hyper terminal.
Since ESC/VP21 is independent of communication protocols,Serial, USB or TCP/IP network can be used to transmit the commands to projec-
tors.
•Serial connection
A/V controllers normally use a serial connection to control projectors. Refer to Appendix for details.
Controller
Video camera
Video
Projector
VTR
DVD
Serial
•USB connection
A USB interface can be used to control a projector. Refer to Appendix for details.
Projector with USB I/F
USB
PC
•Network connection
After establishing a TCP session, ESC/VP21 commands can be sent to projectors. Refer to ESC/ protocol manual.
Projector with network I/F
PC
Hub
TCP/IP
A/V controller
with network I/F
3 of 9
/VP21 Command Formats
command format
A set command consists of a command and a parameter. Projector returns a colon after executing the command.
There are two types of parameters. One is fixed such as ON, OFF, or is a step parameter such as INC, DEC or INIT.
INC increments the parameter by one.
DEC decrements the parameter by one.
INIT initializes the parameter.
Set command example 1
: SOURCE 21
Colon from projector Command Space Parameter Return
Set command example 2
: VOL INC
Colon from projector Command Space Parameter Return
command format
A get command consists of a command and ?. Projector returns a response parameter after executing the command.
Get command example
: SOURCE?
Colon from projector Command ? Return
Response parameter example
SOURCE = 21
:
Colon from projector Command = Parameter
command
The null command is a command code of the return key code (Hex 0D). Projector returns a colon. The null command can be used to confirm
that the projector is in operation.
l commands
Projector returns “ERR” and a return key code (Hex 0D) and a colon when it receives invalid commands.
ERR
:
able Models
EMP-TW100 / TW100H / TS10 / TW10 / TW200 / TW500 / TW10H / TW200H /TW20 / TW600,520,550,800 /
TW700 / TW1000 / TW2000 / TW3000 / TW4000 / TW5000 / TW420
d Table
Item
Power ON/OF
A/V Mute ON/OFF
A/V Mute Screen
ON
OFF
ON
OFF
Black
Blue
User Logo
Command
PWR ON
PWR OFF
MUTE ON
MUTE OFF
MSEL 00
MSEL 01
MSEL 02
All Models
O(*1)
O
O
O
O
O
O(*2)
(*1)The "PWR ON" command for TW200 and TW200H needs to prepare for use. First step is to turn on the projector. And then send the
"SPWRLVL 01" command to the projector after the status of projector goes into the condition that the projector can receive ESC/VP21
command.
Second steps is to turn off the projector once. The "PWR ON" can work on TW200 and TW200H after the status of projector becomes the
standby state.
•TW500 needs to change the setting item to use "PWR ON" command. To validate the "PWR ON" command of TW500, "Network Mon-
itoring" of "Operation" in "Setting" menu must be set to ON. The "PWR ON" command can work on TW500 after the projector is turned
off once and the status of projector becomes the standby state.
(*2)TW10/TW10H does not support the User Logo function.
Item
Source change
Terminal
INPUT 1/A
Signal name
Cyclic within “SOURCE 1x”.
Command
SOURCE 10
SOURCE 11
SOURCE 12
SOURCE 13
SOURCE 14
SOURCE 15
SOURCE 1F
SOURCE 20
SOURCE 21
SOURCE 22
SOURCE 23
SOURCE 24
SOURCE 25
SOURCE 2F
SOURCE 30
SOURCE 31
SOURCE C0
SOURCE C4
SOURCE C5
SOURCE CF
SOURCE 40
SOURCE 41
SOURCE 42
SOURCE 43
SOURCE 44
TW100/
TW100H
TS10
TW10/
TW200/
TW10H
TW200H
TW500
Analog RGB
Digital RGB
RGB Video
YCbCr(*4 Component)
YPbPr(*4 Component)
Auto
INPUT 2/B
Cyclic within “SOURCE 2x”.
Analog RGB
RGB Video
YCbCr(*5 RGB Video)
YPbPr(*5 YCbCr)
YPbPr
Auto
INPUT 3
INPUT 5
Cyclic within “SOURCE 3x”.
Digital RGB
Cyclic within “SOURCE Cx”.
YCbCr
YPbPr
Auto
VIDEO
VIDEO(RCA)
VIDEO(S)
VIDEO(YCbCr)
VIDEO(YPbPr)
Cyclic within “SOURCE 4X”.
-
-
-
-
O
O
-
-
-
-
-
O
O
-
O
O
-
-
-
O
-
-
-
-
O
O
O
O
O
O
O
O
O
-
-
-
O
O
O
O
O
-
-
-
-
-
-
-
-
O
O
O
-
-
O(*3)
-
-
O
O
O
-
O(*3)
O
-
-
-
-
-
-
-
-
-
-
-
O
O
O
-
-
O
-
-
O
O
O
-
O
O
-
-
-
-
-
-
-
O
O
O
-
O
O
O
-
-
O
O
-
O
O
O
O
O
O
-
O
O
O
O
O
-
O
O
O
O
O
O
O
-
-
Item
Source change
Terminal
INPUT 1/A
Signal name
Cyclic within “SOURCE 1x”.
Command
SOURCE 10
SOURCE 11
SOURCE 12
SOURCE 13
SOURCE 14
SOURCE 15
SOURCE 1F
SOURCE 20
SOURCE 21
SOURCE 22
SOURCE 23
SOURCE 24
SOURCE 25
SOURCE 2F
SOURCE 30
SOURCE 31
SOURCE C0
SOURCE C3
SOURCE C4
SOURCE C5
SOURCE CF
SOURCE A0
SOURCE 40
SOURCE 41
SOURCE 42
SOURCE 43
SOURCE 44
TW20
TW600/
520/550/
800
TW700TW1000TW2000
Analog RGB
Digital RGB
RGB Video
YCbCr(*4 Component)
YPbPr(*4 Component)
Auto
INPUT 2/B
Cyclic within “SOURCE 2x”.
Analog RGB
RGB Video
YCbCr(*5 RGB Video)
YPbPr(*5 YCbCr)
YPbPr
Auto
INPUT 3
INPUT 5
Cyclic within “SOURCE 3x”.
Digital RGB
Cyclic within “SOURCE Cx”.
O
-
-
O
O
O
-
O
O
-
-
-
-
-
-
-
-
-
-
-
-
O
O
O
-
-
HDMI 2
VIDEO
VIDEO(RCA)
VIDEO(S)
VIDEO(YCbCr)
VIDEO(YPbPr)
SCART(*6)
YCbCr
YPbPr
Auto
HDMI
Cyclic within “SOURCE 4X”.
-
-
-
-
O
-
-
-
O
O
O
O
O
-
-
-
-
-
O
-
O
O
O
O
O
-
O
O
O
-
-
O
-
-
-
O
O
O
O
O
-
-
-
-
-
O
-
O
O
O
O
O
-
O
O
O
-
-
O
-
-
-
O
O
O
O
O
-
-
-
-
-
O
-
O
O
O
O
O
-
O
O
O
-
-
O
-
-
-
O
O
O
O
O
-
-
-
-
-
O
-
-
-
-
-
-
O
O
O
O
-
-
Item
Source change
Terminal
INPUT 1/A
Signal name
Cyclic within “SOURCE 1x”.
Command
SOURCE 10
SOURCE 11
SOURCE 12
SOURCE 13
SOURCE 14
SOURCE 15
SOURCE 1F
SOURCE 20
SOURCE 21
SOURCE 22
SOURCE 23
SOURCE 24
SOURCE 25
SOURCE 2F
SOURCE 30
SOURCE 31
SOURCE C0
SOURCE C3
SOURCE C4
SOURCE C5
SOURCE CF
SOURCE A0
SOURCE 40
SOURCE 41
SOURCE 42
SOURCE 43
SOURCE 44
TW3000/
TW4000/
TW5000
TW420
Analog RGB
Digital RGB
RGB Video
YCbCr(*4 Component)
YPbPr(*4 Component)
Auto
INPUT 2/B
Cyclic within “SOURCE 2x”.
Analog RGB
RGB Video
YCbCr(*5 RGB Video)
YPbPr(*5 YCbCr)
YPbPr
Auto
INPUT 3
INPUT 5
Cyclic within “SOURCE 3x”.
Digital RGB
Cyclic within “SOURCE Cx”.
HDMI 2
VIDEO
VIDEO(RCA)
VIDEO(S)
VIDEO(YCbCr)
VIDEO(YPbPr)
SCART(*6)
YCbCr
YPbPr
Auto
HDMI
Cyclic within “SOURCE 4X”.
-
-
-
-
O
-
-
-
O
O
O
O
O
-
-
-
-
-
O
-
-
-
-
-
-
O
O
O
O
-
-
O
O
O(*7)
O
O
O
O
(*3)Only when TW10 is connected, the source is not cycled within a signal that can select on a terminal by these commands.
(*4)This signal is selected when TW10 and TW20 is connected.
(*5)This signal is selected when TW500 is connected.
(*6)This signal is selected when TW600/520/550/800/700/1000 is connected.
(*7)This command is can be used only for get.
ix
A projector and a computer can be connected using a serial or USB port. The projector can be remotely controlled by sending commands to the
projector..
Serial Connection (TW100,TS10,TW10,TW200,TW500,TW10H,TW200H,TW20,TW600/520/550/800,TW700,TW1000,TW2000,
TW3000/TW4000/TW5000)
• Select RS-232C at Advanced Setting of the Menu.
• Communication condition
Baud rate : 9600 bps
Data length : 8 bits
Parity : No
Stop bit : 1 bit
Flow control : No
• Connector : D-sub 9pin
• Projector input : Control(RS-232C)
GND
RD
TD
5
2
3
(PC serial cable)
5
3
2
Function
Common ground
Transmitted data
Received data
GND
TD
RD
Signal name
GND
TD
RD
*Theres no effect if DTR and DSR are not used.
USB Connection (TS10,TW200,TW500,TW200H,TW420)
• TS10, select USB at Advanced Setting of the Menu.
• Epson USB VCOM Driver has to be installed in your computer to use USB fpr communication.A COM port is added to your
computer, when the projector and your computer is connected by a USB cable. The added COM is listed at PORT (COM/LPT)
in the device manager tab of System in Control Panel as EPSON COM Emulation port (COMn).
• Connector : USB(B type)
8 of 9
Revision History
RevisionIssued Date PageDescription
A
B
C
D
E
F
G
Oct 19,2005
Sep 29,2006
Mar 19,2007
Jun 4,2007
Dec 14,2007
Nov 14,2008
Dec 2,2008
All pages
All pages
All pages
5.p
All pages
All pages
All pages
First Release
Addition of TW700
Addition of TW1000
Correction of “Applicable Model”.
Addition of TW2000
Addition of TW3000 and TW4000
Addition of TW5000 and TW420
2024年3月12日发(作者：楚芊丽)
ESC/VP21 Command User’s Guide for
Home Projector
Table of Contents
Introduction to ESC/VP21- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3
ESC/VP21 Command Formats- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
Applicable Models - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5
Command Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5
Appendix - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8
Copyright Notice:
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. No
patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting
from the use of the information contained herein.
Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses,
costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications,
repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with SEIKO EPSON CORPORATION’s operating and
maintenance instructions.
SEIKO EPSON CORPORATION shall not be liable against any damages or problems arising from the use of any options or any consumable
products other than those designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION.
EPSON is a registered trademark of SEIKO EPSON CORPORATION. EasyMP is a trademark of SEIKO EPSON CORPORATION. Macin-
tosh, Mac, and iMac are registered trademarks of Apple Computer, Inc. IBM is a registered trademark of International Business Machines
Corporation. Windows and Windows NT are registered trademarks of Microsoft Corporation in the United States of America.
General Notice:
Other product names used herein are also for identification purposes only and may be trademarks of their respective owners. EPSON disclaims
any and all rights in those marks.
©SEIKO EPSON CORPORATION 2003-2005. All rights reserved.
uction to ESC/VP21
ESC/VP21 is a control command and protocol for Epson projectors, which is used for A/V controller to control and monitor Epson projectors.
The command codes are comprised of ASCII codes. Therefore the command codes can be understood very easily and you can easily control
projectors using a PC with a terminal emulator such as Microsoft Hyper terminal.
Since ESC/VP21 is independent of communication protocols,Serial, USB or TCP/IP network can be used to transmit the commands to projec-
tors.
•Serial connection
A/V controllers normally use a serial connection to control projectors. Refer to Appendix for details.
Controller
Video camera
Video
Projector
VTR
DVD
Serial
•USB connection
A USB interface can be used to control a projector. Refer to Appendix for details.
Projector with USB I/F
USB
PC
•Network connection
After establishing a TCP session, ESC/VP21 commands can be sent to projectors. Refer to ESC/ protocol manual.
Projector with network I/F
PC
Hub
TCP/IP
A/V controller
with network I/F
3 of 9
/VP21 Command Formats
command format
A set command consists of a command and a parameter. Projector returns a colon after executing the command.
There are two types of parameters. One is fixed such as ON, OFF, or is a step parameter such as INC, DEC or INIT.
INC increments the parameter by one.
DEC decrements the parameter by one.
INIT initializes the parameter.
Set command example 1
: SOURCE 21
Colon from projector Command Space Parameter Return
Set command example 2
: VOL INC
Colon from projector Command Space Parameter Return
command format
A get command consists of a command and ?. Projector returns a response parameter after executing the command.
Get command example
: SOURCE?
Colon from projector Command ? Return
Response parameter example
SOURCE = 21
:
Colon from projector Command = Parameter
command
The null command is a command code of the return key code (Hex 0D). Projector returns a colon. The null command can be used to confirm
that the projector is in operation.
l commands
Projector returns “ERR” and a return key code (Hex 0D) and a colon when it receives invalid commands.
ERR
:
able Models
EMP-TW100 / TW100H / TS10 / TW10 / TW200 / TW500 / TW10H / TW200H /TW20 / TW600,520,550,800 /
TW700 / TW1000 / TW2000 / TW3000 / TW4000 / TW5000 / TW420
d Table
Item
Power ON/OF
A/V Mute ON/OFF
A/V Mute Screen
ON
OFF
ON
OFF
Black
Blue
User Logo
Command
PWR ON
PWR OFF
MUTE ON
MUTE OFF
MSEL 00
MSEL 01
MSEL 02
All Models
O(*1)
O
O
O
O
O
O(*2)
(*1)The "PWR ON" command for TW200 and TW200H needs to prepare for use. First step is to turn on the projector. And then send the
"SPWRLVL 01" command to the projector after the status of projector goes into the condition that the projector can receive ESC/VP21
command.
Second steps is to turn off the projector once. The "PWR ON" can work on TW200 and TW200H after the status of projector becomes the
standby state.
•TW500 needs to change the setting item to use "PWR ON" command. To validate the "PWR ON" command of TW500, "Network Mon-
itoring" of "Operation" in "Setting" menu must be set to ON. The "PWR ON" command can work on TW500 after the projector is turned
off once and the status of projector becomes the standby state.
(*2)TW10/TW10H does not support the User Logo function.
Item
Source change
Terminal
INPUT 1/A
Signal name
Cyclic within “SOURCE 1x”.
Command
SOURCE 10
SOURCE 11
SOURCE 12
SOURCE 13
SOURCE 14
SOURCE 15
SOURCE 1F
SOURCE 20
SOURCE 21
SOURCE 22
SOURCE 23
SOURCE 24
SOURCE 25
SOURCE 2F
SOURCE 30
SOURCE 31
SOURCE C0
SOURCE C4
SOURCE C5
SOURCE CF
SOURCE 40
SOURCE 41
SOURCE 42
SOURCE 43
SOURCE 44
TW100/
TW100H
TS10
TW10/
TW200/
TW10H
TW200H
TW500
Analog RGB
Digital RGB
RGB Video
YCbCr(*4 Component)
YPbPr(*4 Component)
Auto
INPUT 2/B
Cyclic within “SOURCE 2x”.
Analog RGB
RGB Video
YCbCr(*5 RGB Video)
YPbPr(*5 YCbCr)
YPbPr
Auto
INPUT 3
INPUT 5
Cyclic within “SOURCE 3x”.
Digital RGB
Cyclic within “SOURCE Cx”.
YCbCr
YPbPr
Auto
VIDEO
VIDEO(RCA)
VIDEO(S)
VIDEO(YCbCr)
VIDEO(YPbPr)
Cyclic within “SOURCE 4X”.
-
-
-
-
O
O
-
-
-
-
-
O
O
-
O
O
-
-
-
O
-
-
-
-
O
O
O
O
O
O
O
O
O
-
-
-
O
O
O
O
O
-
-
-
-
-
-
-
-
O
O
O
-
-
O(*3)
-
-
O
O
O
-
O(*3)
O
-
-
-
-
-
-
-
-
-
-
-
O
O
O
-
-
O
-
-
O
O
O
-
O
O
-
-
-
-
-
-
-
O
O
O
-
O
O
O
-
-
O
O
-
O
O
O
O
O
O
-
O
O
O
O
O
-
O
O
O
O
O
O
O
-
-
Item
Source change
Terminal
INPUT 1/A
Signal name
Cyclic within “SOURCE 1x”.
Command
SOURCE 10
SOURCE 11
SOURCE 12
SOURCE 13
SOURCE 14
SOURCE 15
SOURCE 1F
SOURCE 20
SOURCE 21
SOURCE 22
SOURCE 23
SOURCE 24
SOURCE 25
SOURCE 2F
SOURCE 30
SOURCE 31
SOURCE C0
SOURCE C3
SOURCE C4
SOURCE C5
SOURCE CF
SOURCE A0
SOURCE 40
SOURCE 41
SOURCE 42
SOURCE 43
SOURCE 44
TW20
TW600/
520/550/
800
TW700TW1000TW2000
Analog RGB
Digital RGB
RGB Video
YCbCr(*4 Component)
YPbPr(*4 Component)
Auto
INPUT 2/B
Cyclic within “SOURCE 2x”.
Analog RGB
RGB Video
YCbCr(*5 RGB Video)
YPbPr(*5 YCbCr)
YPbPr
Auto
INPUT 3
INPUT 5
Cyclic within “SOURCE 3x”.
Digital RGB
Cyclic within “SOURCE Cx”.
O
-
-
O
O
O
-
O
O
-
-
-
-
-
-
-
-
-
-
-
-
O
O
O
-
-
HDMI 2
VIDEO
VIDEO(RCA)
VIDEO(S)
VIDEO(YCbCr)
VIDEO(YPbPr)
SCART(*6)
YCbCr
YPbPr
Auto
HDMI
Cyclic within “SOURCE 4X”.
-
-
-
-
O
-
-
-
O
O
O
O
O
-
-
-
-
-
O
-
O
O
O
O
O
-
O
O
O
-
-
O
-
-
-
O
O
O
O
O
-
-
-
-
-
O
-
O
O
O
O
O
-
O
O
O
-
-
O
-
-
-
O
O
O
O
O
-
-
-
-
-
O
-
O
O
O
O
O
-
O
O
O
-
-
O
-
-
-
O
O
O
O
O
-
-
-
-
-
O
-
-
-
-
-
-
O
O
O
O
-
-
Item
Source change
Terminal
INPUT 1/A
Signal name
Cyclic within “SOURCE 1x”.
Command
SOURCE 10
SOURCE 11
SOURCE 12
SOURCE 13
SOURCE 14
SOURCE 15
SOURCE 1F
SOURCE 20
SOURCE 21
SOURCE 22
SOURCE 23
SOURCE 24
SOURCE 25
SOURCE 2F
SOURCE 30
SOURCE 31
SOURCE C0
SOURCE C3
SOURCE C4
SOURCE C5
SOURCE CF
SOURCE A0
SOURCE 40
SOURCE 41
SOURCE 42
SOURCE 43
SOURCE 44
TW3000/
TW4000/
TW5000
TW420
Analog RGB
Digital RGB
RGB Video
YCbCr(*4 Component)
YPbPr(*4 Component)
Auto
INPUT 2/B
Cyclic within “SOURCE 2x”.
Analog RGB
RGB Video
YCbCr(*5 RGB Video)
YPbPr(*5 YCbCr)
YPbPr
Auto
INPUT 3
INPUT 5
Cyclic within “SOURCE 3x”.
Digital RGB
Cyclic within “SOURCE Cx”.
HDMI 2
VIDEO
VIDEO(RCA)
VIDEO(S)
VIDEO(YCbCr)
VIDEO(YPbPr)
SCART(*6)
YCbCr
YPbPr
Auto
HDMI
Cyclic within “SOURCE 4X”.
-
-
-
-
O
-
-
-
O
O
O
O
O
-
-
-
-
-
O
-
-
-
-
-
-
O
O
O
O
-
-
O
O
O(*7)
O
O
O
O
(*3)Only when TW10 is connected, the source is not cycled within a signal that can select on a terminal by these commands.
(*4)This signal is selected when TW10 and TW20 is connected.
(*5)This signal is selected when TW500 is connected.
(*6)This signal is selected when TW600/520/550/800/700/1000 is connected.
(*7)This command is can be used only for get.
ix
A projector and a computer can be connected using a serial or USB port. The projector can be remotely controlled by sending commands to the
projector..
Serial Connection (TW100,TS10,TW10,TW200,TW500,TW10H,TW200H,TW20,TW600/520/550/800,TW700,TW1000,TW2000,
TW3000/TW4000/TW5000)
• Select RS-232C at Advanced Setting of the Menu.
• Communication condition
Baud rate : 9600 bps
Data length : 8 bits
Parity : No
Stop bit : 1 bit
Flow control : No
• Connector : D-sub 9pin
• Projector input : Control(RS-232C)
GND
RD
TD
5
2
3
(PC serial cable)
5
3
2
Function
Common ground
Transmitted data
Received data
GND
TD
RD
Signal name
GND
TD
RD
*Theres no effect if DTR and DSR are not used.
USB Connection (TS10,TW200,TW500,TW200H,TW420)
• TS10, select USB at Advanced Setting of the Menu.
• Epson USB VCOM Driver has to be installed in your computer to use USB fpr communication.A COM port is added to your
computer, when the projector and your computer is connected by a USB cable. The added COM is listed at PORT (COM/LPT)
in the device manager tab of System in Control Panel as EPSON COM Emulation port (COMn).
• Connector : USB(B type)
8 of 9
Revision History
RevisionIssued Date PageDescription
A
B
C
D
E
F
G
Oct 19,2005
Sep 29,2006
Mar 19,2007
Jun 4,2007
Dec 14,2007
Nov 14,2008
Dec 2,2008
All pages
All pages
All pages
5.p
All pages
All pages
All pages
First Release
Addition of TW700
Addition of TW1000
Correction of “Applicable Model”.
Addition of TW2000
Addition of TW3000 and TW4000
Addition of TW5000 and TW420