2024年4月1日发(作者：虎纳)
DEUTSCHE NORM
January 2002
Preparation of steel substrates before application of paints
and related products–Surface preparation methods
Part 2: Abrasive blast-cleaning
(ISO8504-2:2000)
English version of DINENISO8504-2
{
ENISO8504-2
ICS 25.220.10
Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen–Verfahren für die
Oberflächenvorbereitung–Teil 2: Strahlen (ISO8504-2:2000)
European Standard ENISO8504-2:2001 has the status of a DINStandard.
National foreword
This standard has been published in accordance with a decision taken by CEN/TC 139 ‘Paints and varnishes’
(Secretariat: Germany) to adopt, without alteration, International Standard ISO 8504-2 as a European
Standard.
The responsible German body involved in its preparation was the Normenausschuss Beschichtungsstoffe
und Beschichtungen (Coatings and Coating Materials Standards Committee), Technical Committee
Korrosionsschutz von Stahlbauten.
The DINStandards corresponding to the International Standards referred to in clause 2 of the ENare as
follows:
ISOStandard
ISO 4628-3
ISO 8502-2
ISO 8502-3
ISO 8502-9
ISO 8503-1
ISO 8503-2
ISO 8504-1
ISO 8504-3
ISO 11124-1
ISO 11124-2
ISO 11124-3
ISO 11124-4
ISO 11126-1
ISO 11126-3
ISO 11126-4
ISO 11126-5
ISO 11126-6
ISO 11126-7
ISO 11126-8
ISO/TR8502-1
DINStandard(s)
DIN 53210 and DIN ISO 4628-3*)
DIN EN ISO 8502-2
DIN EN ISO 8502-3
DIN EN ISO 8502-9
DIN EN ISO 8503-1
DIN EN ISO 8503-2
DIN EN ISO 8504-1
DIN EN ISO 8504-3
DIN EN ISO 11124-1
DIN EN ISO 11124-2
DIN EN ISO 11124-3
DIN EN ISO 11124-4
DIN EN ISO 11126-1
DIN EN ISO 11126-3
DIN EN ISO 11126-4
DIN EN ISO 11126-5
DIN EN ISO 11126-6
DIN EN ISO 11126-7
DIN EN ISO 11126-8
DINVENVISO 8502-1
*)Currently at draft stage.
Continued overleaf.
ENcomprises 17 pages.
©No part of this standard may be reproduced without the prior permission of
DINDeutsches Institut für Normung e.V., Berlin. Beuth Verlag GmbH, 10772Berlin, Germany,
has the exclusive right of sale for German Standards (DIN-Normen).
SO8504-2:2002-01
English price group12Sales No.1112
05.02
Page2
DINENISO8504-2:2002-01
National Annex NA
Standards referred to
(and not included in Normative references and Annex ZA)
Designation of the degree of rusting of paints, varnishes and similar coatings
Tests for the assessment of surface cleanliness–Part 2: Laboratory determination of
chloride on cleaned surfaces (ISO8502-2:1992)
DINENISO8502-3Tests for the assessment of surface cleanliness–Part 3: Assessment of dust on steel
surfaces prepared for painting (pressure-sensitive tape method) (ISO8502-3:1992)
DINENISO8502-9Preparation of steel substrates before application of paints and related products–
Tests for the assessment of surface cleanliness–Part 9: Field method for the
conductometric determination of water-soluble salts (ISO8502-9:1998)
DINENISO8503-1Surface roughness characteristics of blast-cleaned steel substrates–Specifications
and definitions for ISOsurface profile comparators for the assessment of abrasive
blast-cleaned surfaces (ISO 8503-1:1988)
DINENISO8503-2Surface roughness characteristics of blast-cleaned steel substrates–Method for the
grading of surface profile of abrasive blast-cleaned substrates using a comparator
(ISO8503-2:1988)
DIN EN ISO 8504-1Preparation of steel substrates before application of paints and related products–
Surface preparation methods–Part 1: General principles (ISO8504-1:2000)
DIN EN ISO 8504-3
Preparation of steel substrates before application of paints and related products–
Surface preparation methods–Part 3: Hand- and power-tool cleaning
(ISO8504-3:1993)
DINENISO11124-1Specifications for metallic blast-cleaning products–Part 1: General introduction and
classification (ISO 11124-1:1993)
DINENISO11124-2Specifications for metallic blast-cleaning abrasives–Part 2: Chilled-iron grit
(ISO 11124-2:1993)
DINENISO11124-3Specifications for metallic blast-cleaning abrasives–Part 3: High-carbon cast steel
shot and grit (ISO 11124-3:1993)
DINENISO11124-4Specifications for metallic blast-cleaning abrasives–Part 4: Low-carbon cast steel
shot (ISO 11124-4:1993)
DINENISO11126-1Specifications for non-metallic blast-cleaning products–Part 1: General introduction
and classification (ISO 11126-1:1993, including Technical Corrigenda 1:1997
and 2:1997)
DINENISO11126-3Specifications for non-metallic blast-cleaning abrasives–Part 3: Copper refinery slag
(ISO 11126-3:1993)
DINENISO11126-4Specifications for non-metallic blast-cleaning abrasives–Part 4: Coal furnace slag
(ISO 11126-4:1993)
DINENISO11126-5Specifications for non-metallic blast-cleaning abrasives–Part 5: Nickel refinery slag
(ISO 11126-5:1993)
DINENISO11126-6Specifications for non-metallic blast-cleaning abrasives–Part 6: Iron furnace slag
(ISO 11126-6:1993)
DINENISO11126-7Specifications for non-metallic blast-cleaning abrasives–Part 7: Fused aluminium
oxide (ISO 11126-7:1995, including Technical Corrigendum-1:1995)
DINENISO11126-8Specifications for non-metallic blast-cleaning abrasives–Part 8: Olivine sand
(ISO 11126-8:1993)
DINENISO12944-4Corrosion protection of steel structures by protective paint systems–Part 4: Types of
surface and surface preparation (ISO12944-4:1998)
DINVENVISO 8502-1Preparation of steel substrates before application of paints and related products–
Tests for the assessment of surface cleanliness–Part 2: Field test for soluble iron
corrosion products (ISO/TR8502-1:1991)
DIN53210
DINENISO8502-2
ENISO8504-2
May 2001
ICS 25.220.10
English version
Preparation of steel substrates before application of paints
and related products–Surface preparation methods
Part 2: Abrasive blast-cleaning
(ISO8504-2:2000)
Préparation des subjectiles d’acier
avant application de peintures et de
produits assimilés–Méthodes de
préparation des subjectiles–Partie 2:
Décapage par projection d’abrasif
(ISO 8504-2:2000)
Vorbereitung von Stahloberflächen
vor dem Auftragen von Beschichtungs-
stoffen–Verfahren für die
Oberflächenvorbereitung–Teil 2:
Strahlen (ISO8504-2:2000)
This European Standard was approved by CENon 2001-03-07.
CENmembers are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national stand-
ards may be obtained on application to the Management Centre or to any
CENmember.
The European Standards exist in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a
CENmember into its own language and notified to the Management Centre has
the same status as the official versions.
CENmembers are the national standards bodies of Austria, Belgium, the Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland,
and the United Kingdom.
|
ÈÉË
European Committee for Standardization
Comité Européen de Normalisation
Europäisches Komitee für Normung
Management Centre: rue de Stassart 36, B-1050 Brussels
©–All rights of exploitation in any form and by any means
reserved worldwide for CENnational members.
Ref. No. ENISO8504-2:2001E
Page2
ENISO8504-2:2001
Foreword
International Standard
ISO 8504-2:2000Preparation of steel substrates before application of paints and related products–Surface
preparation methods–Part 2: Abrasive blast-cleaning,
which was prepared by ISO/TC 35 ‘Paints and varnishes’ of the International Organization for Standardization,
has been adopted by Technical Committee CEN/TC 139 ‘Paints and varnishes’, the Secretariat of which is held
by DIN, as a European Standard.
This European Standard shall be given the status of a national standard, either by publication of an identical text
or by endorsement, and conflicting national standards withdrawn, by November 2001 at the latest.
In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard:
Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.
Endorsement notice
The text of the International Standard ISO 8504-2:2000 was approved by CEN as a European Standard without
any modification.
NOTE:Normative references to international publications are listed in Annex ZA (normative).
2
3
4
4
6
6
9
13
14
Page3
ENISO8504-2:2001
Page4
ENISO8504-2:2001
Page5
ENISO8504-2:2001
Page6
ENISO8504-2:2001
Page7
ENISO8504-2:2001
Page8
ENISO8504-2:2001
Page9
ENISO8504-2:2001
Page10
ENISO8504-2:2001
Page11
ENISO8504-2:2001
Page12
ENISO8504-2:2001
Page13
ENISO8504-2:2001
Page14
ENISO8504-2:2001
Page15
ENISO8504-2:2001
Page16
ENISO8504-2:2001
Page17
ENISO8504-2:2001
2024年4月1日发(作者：虎纳)
DEUTSCHE NORM
January 2002
Preparation of steel substrates before application of paints
and related products–Surface preparation methods
Part 2: Abrasive blast-cleaning
(ISO8504-2:2000)
English version of DINENISO8504-2
{
ENISO8504-2
ICS 25.220.10
Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen–Verfahren für die
Oberflächenvorbereitung–Teil 2: Strahlen (ISO8504-2:2000)
European Standard ENISO8504-2:2001 has the status of a DINStandard.
National foreword
This standard has been published in accordance with a decision taken by CEN/TC 139 ‘Paints and varnishes’
(Secretariat: Germany) to adopt, without alteration, International Standard ISO 8504-2 as a European
Standard.
The responsible German body involved in its preparation was the Normenausschuss Beschichtungsstoffe
und Beschichtungen (Coatings and Coating Materials Standards Committee), Technical Committee
Korrosionsschutz von Stahlbauten.
The DINStandards corresponding to the International Standards referred to in clause 2 of the ENare as
follows:
ISOStandard
ISO 4628-3
ISO 8502-2
ISO 8502-3
ISO 8502-9
ISO 8503-1
ISO 8503-2
ISO 8504-1
ISO 8504-3
ISO 11124-1
ISO 11124-2
ISO 11124-3
ISO 11124-4
ISO 11126-1
ISO 11126-3
ISO 11126-4
ISO 11126-5
ISO 11126-6
ISO 11126-7
ISO 11126-8
ISO/TR8502-1
DINStandard(s)
DIN 53210 and DIN ISO 4628-3*)
DIN EN ISO 8502-2
DIN EN ISO 8502-3
DIN EN ISO 8502-9
DIN EN ISO 8503-1
DIN EN ISO 8503-2
DIN EN ISO 8504-1
DIN EN ISO 8504-3
DIN EN ISO 11124-1
DIN EN ISO 11124-2
DIN EN ISO 11124-3
DIN EN ISO 11124-4
DIN EN ISO 11126-1
DIN EN ISO 11126-3
DIN EN ISO 11126-4
DIN EN ISO 11126-5
DIN EN ISO 11126-6
DIN EN ISO 11126-7
DIN EN ISO 11126-8
DINVENVISO 8502-1
*)Currently at draft stage.
Continued overleaf.
ENcomprises 17 pages.
©No part of this standard may be reproduced without the prior permission of
DINDeutsches Institut für Normung e.V., Berlin. Beuth Verlag GmbH, 10772Berlin, Germany,
has the exclusive right of sale for German Standards (DIN-Normen).
SO8504-2:2002-01
English price group12Sales No.1112
05.02
Page2
DINENISO8504-2:2002-01
National Annex NA
Standards referred to
(and not included in Normative references and Annex ZA)
Designation of the degree of rusting of paints, varnishes and similar coatings
Tests for the assessment of surface cleanliness–Part 2: Laboratory determination of
chloride on cleaned surfaces (ISO8502-2:1992)
DINENISO8502-3Tests for the assessment of surface cleanliness–Part 3: Assessment of dust on steel
surfaces prepared for painting (pressure-sensitive tape method) (ISO8502-3:1992)
DINENISO8502-9Preparation of steel substrates before application of paints and related products–
Tests for the assessment of surface cleanliness–Part 9: Field method for the
conductometric determination of water-soluble salts (ISO8502-9:1998)
DINENISO8503-1Surface roughness characteristics of blast-cleaned steel substrates–Specifications
and definitions for ISOsurface profile comparators for the assessment of abrasive
blast-cleaned surfaces (ISO 8503-1:1988)
DINENISO8503-2Surface roughness characteristics of blast-cleaned steel substrates–Method for the
grading of surface profile of abrasive blast-cleaned substrates using a comparator
(ISO8503-2:1988)
DIN EN ISO 8504-1Preparation of steel substrates before application of paints and related products–
Surface preparation methods–Part 1: General principles (ISO8504-1:2000)
DIN EN ISO 8504-3
Preparation of steel substrates before application of paints and related products–
Surface preparation methods–Part 3: Hand- and power-tool cleaning
(ISO8504-3:1993)
DINENISO11124-1Specifications for metallic blast-cleaning products–Part 1: General introduction and
classification (ISO 11124-1:1993)
DINENISO11124-2Specifications for metallic blast-cleaning abrasives–Part 2: Chilled-iron grit
(ISO 11124-2:1993)
DINENISO11124-3Specifications for metallic blast-cleaning abrasives–Part 3: High-carbon cast steel
shot and grit (ISO 11124-3:1993)
DINENISO11124-4Specifications for metallic blast-cleaning abrasives–Part 4: Low-carbon cast steel
shot (ISO 11124-4:1993)
DINENISO11126-1Specifications for non-metallic blast-cleaning products–Part 1: General introduction
and classification (ISO 11126-1:1993, including Technical Corrigenda 1:1997
and 2:1997)
DINENISO11126-3Specifications for non-metallic blast-cleaning abrasives–Part 3: Copper refinery slag
(ISO 11126-3:1993)
DINENISO11126-4Specifications for non-metallic blast-cleaning abrasives–Part 4: Coal furnace slag
(ISO 11126-4:1993)
DINENISO11126-5Specifications for non-metallic blast-cleaning abrasives–Part 5: Nickel refinery slag
(ISO 11126-5:1993)
DINENISO11126-6Specifications for non-metallic blast-cleaning abrasives–Part 6: Iron furnace slag
(ISO 11126-6:1993)
DINENISO11126-7Specifications for non-metallic blast-cleaning abrasives–Part 7: Fused aluminium
oxide (ISO 11126-7:1995, including Technical Corrigendum-1:1995)
DINENISO11126-8Specifications for non-metallic blast-cleaning abrasives–Part 8: Olivine sand
(ISO 11126-8:1993)
DINENISO12944-4Corrosion protection of steel structures by protective paint systems–Part 4: Types of
surface and surface preparation (ISO12944-4:1998)
DINVENVISO 8502-1Preparation of steel substrates before application of paints and related products–
Tests for the assessment of surface cleanliness–Part 2: Field test for soluble iron
corrosion products (ISO/TR8502-1:1991)
DIN53210
DINENISO8502-2
ENISO8504-2
May 2001
ICS 25.220.10
English version
Preparation of steel substrates before application of paints
and related products–Surface preparation methods
Part 2: Abrasive blast-cleaning
(ISO8504-2:2000)
Préparation des subjectiles d’acier
avant application de peintures et de
produits assimilés–Méthodes de
préparation des subjectiles–Partie 2:
Décapage par projection d’abrasif
(ISO 8504-2:2000)
Vorbereitung von Stahloberflächen
vor dem Auftragen von Beschichtungs-
stoffen–Verfahren für die
Oberflächenvorbereitung–Teil 2:
Strahlen (ISO8504-2:2000)
This European Standard was approved by CENon 2001-03-07.
CENmembers are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national stand-
ards may be obtained on application to the Management Centre or to any
CENmember.
The European Standards exist in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a
CENmember into its own language and notified to the Management Centre has
the same status as the official versions.
CENmembers are the national standards bodies of Austria, Belgium, the Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland,
and the United Kingdom.
|
ÈÉË
European Committee for Standardization
Comité Européen de Normalisation
Europäisches Komitee für Normung
Management Centre: rue de Stassart 36, B-1050 Brussels
©–All rights of exploitation in any form and by any means
reserved worldwide for CENnational members.
Ref. No. ENISO8504-2:2001E
Page2
ENISO8504-2:2001
Foreword
International Standard
ISO 8504-2:2000Preparation of steel substrates before application of paints and related products–Surface
preparation methods–Part 2: Abrasive blast-cleaning,
which was prepared by ISO/TC 35 ‘Paints and varnishes’ of the International Organization for Standardization,
has been adopted by Technical Committee CEN/TC 139 ‘Paints and varnishes’, the Secretariat of which is held
by DIN, as a European Standard.
This European Standard shall be given the status of a national standard, either by publication of an identical text
or by endorsement, and conflicting national standards withdrawn, by November 2001 at the latest.
In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard:
Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.
Endorsement notice
The text of the International Standard ISO 8504-2:2000 was approved by CEN as a European Standard without
any modification.
NOTE:Normative references to international publications are listed in Annex ZA (normative).
2
3
4
4
6
6
9
13
14
Page3
ENISO8504-2:2001
Page4
ENISO8504-2:2001
Page5
ENISO8504-2:2001
Page6
ENISO8504-2:2001
Page7
ENISO8504-2:2001
Page8
ENISO8504-2:2001
Page9
ENISO8504-2:2001
Page10
ENISO8504-2:2001
Page11
ENISO8504-2:2001
Page12
ENISO8504-2:2001
Page13
ENISO8504-2:2001
Page14
ENISO8504-2:2001
Page15
ENISO8504-2:2001
Page16
ENISO8504-2:2001
Page17
ENISO8504-2:2001