2024年4月2日发(作者：仪夏烟)

华为IAD 132E(T)升级方法

root

admin

en

conf te

先固定设备IP 地址

设置TFTP 服务文件目录。将4个文件拷贝到服务目录下。

以下设备IP地址设置为192.168.1.93 服务器地址设置为：

192.168.1.55为例

config te

ip add 192.168.1.93 255.255.255.0

load packet tftp 192.168.1.55 iad_packet

load packet tftp 192.168.1.55

load logic tftp 192.168.1.55 Iad_cpld

华为超级密码

hwamg

amg5000

restore default-config

以下升级步骤实际升级

High Precise CpuTickBase = 0x17d0608

PerformanceBase = 0xa5593

Initialize and check system complete

Start Initialize SPI.

SPI module initialized OK.

**************************************************

-> Lanswitch self test OK.

-> Dsp self test OK.

-> ASID on slot 1 simple self test ok!

-> ASID on slot 2 simple self test ok!

-> No board on slot 3!

**************************************************

Wait agent ...

Begin Register .

Register time out

Not upgrade file

Begin search system config data changed on initialize.

If we found system config data changed on initialize, we will write system initialize

data automatically!

We found nothing changed

******************************************

* *

* IAD2000 Integrated Access Device *

* *

******************************************

Copyright(C) 2002-2004 by HUAWEI TECH CO., LTD

Host name:

Phone:

User name (<=15 chars):

User password (<=15 chars):

Incorrect User's Name or Password!

User name (<=15 chars):root

User password (<=15 chars):

IAD2000>enable

IAD2000#configure terminal

IAD2000(config)#

ip address 192.168.1.93 255.255.255.0

{ |gateway-ip }:

Command:

ip address 192.168.1.93 255.255.255.0