2024年4月2日发(作者：畅嘉言)
Page 1 Of 12
ShenZhen C&D Electronics .
Add:
Building 2, Xiayousong Mountaintop Industrial District,Yousong Village,LongHua
Town, Baoan District ShenZhen China Zip 518109
Tel: 86-755- 28142422 Fax: 86-755-28142699 E-mail:******************
Remote control specification
(Rev. A0)
Seller
Part Name :Remote control
Part No. :
Customer
Part Name :
Part No. :
Seller approval
Prepared By:
Date:
Checked By:
Date:
Approved By:
Date:
company chop：
Customer approval
Received by:
Date：
Checked by:
Date:
Approved by:
Date:
company chop：
Change history
Version Date
Description
Author
2、目录Index
Page 2 Of 12
NO. appellation
1 规格书封面 (Approval Sheet Cover)
2
3
4
5
6
7
8
9
目录 (Index)
检验内容及要求 (Verification content & Requirement)
码表 (Code table)
产品效果图 (Product Cosmetics drawing)
原理图(Schematic diagram)
爆炸图 (Explosion drawing)
产品尺寸图 (Dimension drawing)
包装尺寸图 (Packaging drawing)
Page
1/12
2/12
3/12～6/12
7/12
8/12
9/12
10/12
11/12
12/12
3.检验内容及要求 (Verification content & Requirement) Page 3Of 12
1、 一般项目(General Items)
1.1、 适用范围Apply for: RC35J remote
工作环境Working Environment: -10℃~40℃、45﹪~90﹪RH、86~106Kpa
存储温度Storage Temperature :-40℃~70℃
试验环境Test Environment: 5℃~35℃、45﹪~75﹪RH、86~106Kpa
额定电压Rating Voltage:DC3.0V
适用电池Power: AAA*2 pcs
1.2、
1.3、
1.4、
1.5、
1.6、
1.7、 重量范围：25g +/-5g（Extra weight is 25g +/-5g）
2、 可视检测项目Visible Test Item
测试条件Test Conditions
A:正面在标准光源下30CM距离10秒以内目测Put the top face under the standard light source and test by
sight from the 30cm distance for 10 seconds
B:其余面标准光源下50CM距离5秒以内目测Put other sides under the standard light source and test by
sight from the 50cm distance for 5 seconds
序号
No.
2.1
项目Item
划伤、沾污、割裂、变形
Scratches, Stain and distortion of the Unit
测试要求Test Requirements
符合摩托罗拉规格书 365-095-08990
According to Moto specification, 365-095-08990
内容正确、清晰、均匀、整齐
2.2 印刷图形及文字Hot Stamped Graphics and Letters Correct, in focus and comply
With the drawing
2.3 壳体配合Match of top case and bottom case
2.4 表面Appearance
3、 电气性能Electric Capability
序号
3.1
3.2
3.3
3.4
项目
载波频率Carrier frequency
工作电压Working Voltage
待机电流Static Current
工作电流Working Current
发射角度和距离
Transmit Angel and Distance
（工作电压3.0V)
Working Voltage(3V)
3.5
3.6
3.7
码表Code Table
工作原理图Schematic Diagram
见码表图Refer to the Code Table
见工作原理图Schematic Diagram
36KHZ ±1K
DC2.2V~3.6V
≤5uA
≤50mA
测试要求Test Requirements
无翘起、变形、开裂、断差
No distortion and Crack between the two parts
材质正确、顔色一致Correct material and color
Page 4Of 12
3.8
3.9
3.10
电池使用寿命Battery life
电压频率漂移
Voltage drift Frequency
温度频率漂移
Temp Drift Frequency
性能测试
Actual performance test
AAA电池. 每次按键时间0.5秒, 100次/天，使用寿命1年
100times/day(0.5seconds/time), Battery life is around 1 year
3.2v 0.4 KHz (vb=2.2-3.3v)
3.2v 1.5 KHz (temp=-10-+40)
每个按键需操作有效
No Failure in each key Operation
3.11
双键按下遥控器进入休眠状态
If multiple, simultaneous keys are
3.12
pressed; the RCU shall transition into
Inactive state.
OK
长按按键进入省电模式
If a key is pressed more than 20
3.13
OK
seconds the RCU shall transition into
Inactive state.
当一个按键按下时，遥控器必须
输出信号，直到按键释放
3.14
When one key is pressed the
remote shall transimt IR until the key
OK
is released.
4、
机械性能Mechanical Capacity
序号
No.
4.1
项目Item
按键操作力度
Button Press Force
按键强度
Button Intensity
180g ± 30g
50N 力往中心垂直按压5S后正常
4.2
After pressing for 5S with 50N force, the remote control works well
当3Kg的力压在每个按键上持续3秒PCB不能有裂缝
No crack on PCB when 3kg pressure applied on each key for 3 seconds.
1，按键能够维持30万次操作（
直流3 V电压，30-60打击/分钟
）
4.3 寿命测试 Life test
测试要求Test Requirements
1，The keys shall sustain over 300,000 operations (DC3.0V, 30-60 strikes/min) /cycles
of each key through its full travel to closure
2，遥控器能够保持7年正常使用。
2，Remote should sustain 7 year normal use。
按键手感
4.4 Tactile feedback
of buttons
4.5
按键行程
Button Press Distance
按压松开后快速回弹(返还力度>40g)，感觉清晰
After pressing, the key will return back to the original place and the feeling is clear.
每个按键使用必须灵活并且有滴答声
Each rubber key should flexible when "click"
0.2mm ～0.5mm
80CM高度6面各一次，自由跌落至厚度3CM硬质木板上，再行检测：a、接受电
4.6
跌落测试
Drop Test
池和卡套与产品分离 b、重装电池后功能正常 c、结构无损伤 d、上述电气性
能正常
Drop the 6 faces of the bare unit from the height of 80cm of the steel which is 3cm
thick and test: a. the battery separate from the remote is acceptable. b. the remote
works well after reinstall. c. no damages on mechanical. d. the above electronic
capacity work well
水平和垂直方向，每个方向两种频率各5个循环：a、频率10~30~10Hz位移距离
0.75mm b、频率30~55~30Hz位移距离0.15mm，测试后检测结构无损伤, 电气
4.7
振动测试
Vibration Test
性能正常
5 recycle of 2 frequencies in the horizontal and vertical direction: a. frequency
10~30~10Hz to move 0.75mm. b.
frequency
30~55~30Hz to move 0.15mm, no
damages in mechanical and electronic capacity
1. 3M胶纸（600）5次无脱落现象
4.8
喷油丝印附着力测试
Print a Adhesion Test
喷油丝印耐腐鉵测试
Print corrosion test
表面硬度测试(高光面除外)
3M tape(600) 5 times, the print is complete
2. RCA测试:以225gf力测试纸带长度100CM无脱落现象
RCA test: use 225gf force, 100CM length tape, the print is complete
1. 用棉布浸泡99%工业酒精1min,500gf来回20次擦试无脱落现象
Sink the cotton in 99% alcohol 1 minutes with 500 gf for to scrub the print 20 time
2H铅笔倾斜45°,300gf作业于产品表面均匀移动1CM无凹痕
Pencil hardness is 2H, loading force is 300gf, with 10mm stroke, angel 45° no
sink mark
100次拔取电池电子功能无异常
No electrical abnormity after 100 runs batteries insert & remove test
4.9
4.10 Hardness Test
(except glossy case)
4.11
电池装卸
Battery Contact
电池门
Battery Cover
4.12
500次电池盖拔取无异常
No abnormity after 500 runs battery cover insert & remove test
遥控器按键声音必须非常小。
The remote keys shall flex back when clicking with a very low sound.
遥控器晃动是不能有异响。
There shall be no rattling when the remote is shaken.
4.13
声音要求
Sound Rquest
5、 环境测试Environmental Test
序号
No.
项目Item 测试要求
操作温度
Operating
Temperatur
操作湿度
Operating
Humidity
存放温度
Storage
Temperature
存放湿度
Storage
Humidity
遥控器在
-10ºC~ +40ºC环境下可以正常操作。
The RCU shall be capable of operating in an ambient temperature range of -10ºC to +40ºC.
遥控器在
8%º~ 90%湿度环境下可以正常操作,不冷凝。
The device shall be capable of operating in a relative humidity range of 8% to 90%,
non-condensing.
遥控器在放置于-40º ~+70ºC的高低温环境后仍可正常操作。
The RCU shall be capable of operating after being stored in an ambient temperature range of
-40º to +70ºC.
遥控器在放置于 5%~ 90%的湿度环境后仍可正常操作。
The RCU shall be capable of operating after being stored in a relative humidity range of 5% to
90%, non-condensing.
Page 6Of 12
6、 产品认证 Components Compliant
序号
No.
6.1
项目Item 规格Specs
RoHS
遥控器必须符合RoHS标准。
The RCU shall comply with RoHS standards.
遥控器必须符合CE标准。
The RCU shall fulfill the relevant CE requirements
CE Directive (9368/EEC)
6.2
CE
EN 60950
EN 62479
For IR only:
EMC Directive (2004/108/EC) through
EN 55022 and EN 55024 for RCU
遥控器必须符合REACH标准。
The RCU shall comply with REACH standards
遥控器必须符合摩托罗拉的W18规范。
The RCU shall comply with Motorola W18 specification.
遥控器必须符合废弃电器电子设备指令（WEEE）
The RCU shall be approved for the Waste Electrical and Electronic Equipment Directive
(WEEE) mark.
6.3
6.4
REACH
W18
6.5
WEEE
Page 7Of 12
4、码表(Code tableve )
Page 8Of 12
5、产品效果图 (Product Cosmetics drawing)
6. 原理图(Schematic diagram)
Page 9Of 12
Page10Of 12
7、爆炸图 (Explosion drawing)
Page 11Of 12
8、产品尺寸图 (Dimension drawing)
9、包装尺寸图 (Packaging drawing)
Page 12 Of 12
Label inside Battery door:
Label for PE plastic package:
Lable for carton box:
Packing drawing：
2024年4月2日发(作者：畅嘉言)
Page 1 Of 12
ShenZhen C&D Electronics .
Add:
Building 2, Xiayousong Mountaintop Industrial District,Yousong Village,LongHua
Town, Baoan District ShenZhen China Zip 518109
Tel: 86-755- 28142422 Fax: 86-755-28142699 E-mail:******************
Remote control specification
(Rev. A0)
Seller
Part Name :Remote control
Part No. :
Customer
Part Name :
Part No. :
Seller approval
Prepared By:
Date:
Checked By:
Date:
Approved By:
Date:
company chop：
Customer approval
Received by:
Date：
Checked by:
Date:
Approved by:
Date:
company chop：
Change history
Version Date
Description
Author
2、目录Index
Page 2 Of 12
NO. appellation
1 规格书封面 (Approval Sheet Cover)
2
3
4
5
6
7
8
9
目录 (Index)
检验内容及要求 (Verification content & Requirement)
码表 (Code table)
产品效果图 (Product Cosmetics drawing)
原理图(Schematic diagram)
爆炸图 (Explosion drawing)
产品尺寸图 (Dimension drawing)
包装尺寸图 (Packaging drawing)
Page
1/12
2/12
3/12～6/12
7/12
8/12
9/12
10/12
11/12
12/12
3.检验内容及要求 (Verification content & Requirement) Page 3Of 12
1、 一般项目(General Items)
1.1、 适用范围Apply for: RC35J remote
工作环境Working Environment: -10℃~40℃、45﹪~90﹪RH、86~106Kpa
存储温度Storage Temperature :-40℃~70℃
试验环境Test Environment: 5℃~35℃、45﹪~75﹪RH、86~106Kpa
额定电压Rating Voltage:DC3.0V
适用电池Power: AAA*2 pcs
1.2、
1.3、
1.4、
1.5、
1.6、
1.7、 重量范围：25g +/-5g（Extra weight is 25g +/-5g）
2、 可视检测项目Visible Test Item
测试条件Test Conditions
A:正面在标准光源下30CM距离10秒以内目测Put the top face under the standard light source and test by
sight from the 30cm distance for 10 seconds
B:其余面标准光源下50CM距离5秒以内目测Put other sides under the standard light source and test by
sight from the 50cm distance for 5 seconds
序号
No.
2.1
项目Item
划伤、沾污、割裂、变形
Scratches, Stain and distortion of the Unit
测试要求Test Requirements
符合摩托罗拉规格书 365-095-08990
According to Moto specification, 365-095-08990
内容正确、清晰、均匀、整齐
2.2 印刷图形及文字Hot Stamped Graphics and Letters Correct, in focus and comply
With the drawing
2.3 壳体配合Match of top case and bottom case
2.4 表面Appearance
3、 电气性能Electric Capability
序号
3.1
3.2
3.3
3.4
项目
载波频率Carrier frequency
工作电压Working Voltage
待机电流Static Current
工作电流Working Current
发射角度和距离
Transmit Angel and Distance
（工作电压3.0V)
Working Voltage(3V)
3.5
3.6
3.7
码表Code Table
工作原理图Schematic Diagram
见码表图Refer to the Code Table
见工作原理图Schematic Diagram
36KHZ ±1K
DC2.2V~3.6V
≤5uA
≤50mA
测试要求Test Requirements
无翘起、变形、开裂、断差
No distortion and Crack between the two parts
材质正确、顔色一致Correct material and color
Page 4Of 12
3.8
3.9
3.10
电池使用寿命Battery life
电压频率漂移
Voltage drift Frequency
温度频率漂移
Temp Drift Frequency
性能测试
Actual performance test
AAA电池. 每次按键时间0.5秒, 100次/天，使用寿命1年
100times/day(0.5seconds/time), Battery life is around 1 year
3.2v 0.4 KHz (vb=2.2-3.3v)
3.2v 1.5 KHz (temp=-10-+40)
每个按键需操作有效
No Failure in each key Operation
3.11
双键按下遥控器进入休眠状态
If multiple, simultaneous keys are
3.12
pressed; the RCU shall transition into
Inactive state.
OK
长按按键进入省电模式
If a key is pressed more than 20
3.13
OK
seconds the RCU shall transition into
Inactive state.
当一个按键按下时，遥控器必须
输出信号，直到按键释放
3.14
When one key is pressed the
remote shall transimt IR until the key
OK
is released.
4、
机械性能Mechanical Capacity
序号
No.
4.1
项目Item
按键操作力度
Button Press Force
按键强度
Button Intensity
180g ± 30g
50N 力往中心垂直按压5S后正常
4.2
After pressing for 5S with 50N force, the remote control works well
当3Kg的力压在每个按键上持续3秒PCB不能有裂缝
No crack on PCB when 3kg pressure applied on each key for 3 seconds.
1，按键能够维持30万次操作（
直流3 V电压，30-60打击/分钟
）
4.3 寿命测试 Life test
测试要求Test Requirements
1，The keys shall sustain over 300,000 operations (DC3.0V, 30-60 strikes/min) /cycles
of each key through its full travel to closure
2，遥控器能够保持7年正常使用。
2，Remote should sustain 7 year normal use。
按键手感
4.4 Tactile feedback
of buttons
4.5
按键行程
Button Press Distance
按压松开后快速回弹(返还力度>40g)，感觉清晰
After pressing, the key will return back to the original place and the feeling is clear.
每个按键使用必须灵活并且有滴答声
Each rubber key should flexible when "click"
0.2mm ～0.5mm
80CM高度6面各一次，自由跌落至厚度3CM硬质木板上，再行检测：a、接受电
4.6
跌落测试
Drop Test
池和卡套与产品分离 b、重装电池后功能正常 c、结构无损伤 d、上述电气性
能正常
Drop the 6 faces of the bare unit from the height of 80cm of the steel which is 3cm
thick and test: a. the battery separate from the remote is acceptable. b. the remote
works well after reinstall. c. no damages on mechanical. d. the above electronic
capacity work well
水平和垂直方向，每个方向两种频率各5个循环：a、频率10~30~10Hz位移距离
0.75mm b、频率30~55~30Hz位移距离0.15mm，测试后检测结构无损伤, 电气
4.7
振动测试
Vibration Test
性能正常
5 recycle of 2 frequencies in the horizontal and vertical direction: a. frequency
10~30~10Hz to move 0.75mm. b.
frequency
30~55~30Hz to move 0.15mm, no
damages in mechanical and electronic capacity
1. 3M胶纸（600）5次无脱落现象
4.8
喷油丝印附着力测试
Print a Adhesion Test
喷油丝印耐腐鉵测试
Print corrosion test
表面硬度测试(高光面除外)
3M tape(600) 5 times, the print is complete
2. RCA测试:以225gf力测试纸带长度100CM无脱落现象
RCA test: use 225gf force, 100CM length tape, the print is complete
1. 用棉布浸泡99%工业酒精1min,500gf来回20次擦试无脱落现象
Sink the cotton in 99% alcohol 1 minutes with 500 gf for to scrub the print 20 time
2H铅笔倾斜45°,300gf作业于产品表面均匀移动1CM无凹痕
Pencil hardness is 2H, loading force is 300gf, with 10mm stroke, angel 45° no
sink mark
100次拔取电池电子功能无异常
No electrical abnormity after 100 runs batteries insert & remove test
4.9
4.10 Hardness Test
(except glossy case)
4.11
电池装卸
Battery Contact
电池门
Battery Cover
4.12
500次电池盖拔取无异常
No abnormity after 500 runs battery cover insert & remove test
遥控器按键声音必须非常小。
The remote keys shall flex back when clicking with a very low sound.
遥控器晃动是不能有异响。
There shall be no rattling when the remote is shaken.
4.13
声音要求
Sound Rquest
5、 环境测试Environmental Test
序号
No.
项目Item 测试要求
操作温度
Operating
Temperatur
操作湿度
Operating
Humidity
存放温度
Storage
Temperature
存放湿度
Storage
Humidity
遥控器在
-10ºC~ +40ºC环境下可以正常操作。
The RCU shall be capable of operating in an ambient temperature range of -10ºC to +40ºC.
遥控器在
8%º~ 90%湿度环境下可以正常操作,不冷凝。
The device shall be capable of operating in a relative humidity range of 8% to 90%,
non-condensing.
遥控器在放置于-40º ~+70ºC的高低温环境后仍可正常操作。
The RCU shall be capable of operating after being stored in an ambient temperature range of
-40º to +70ºC.
遥控器在放置于 5%~ 90%的湿度环境后仍可正常操作。
The RCU shall be capable of operating after being stored in a relative humidity range of 5% to
90%, non-condensing.
Page 6Of 12
6、 产品认证 Components Compliant
序号
No.
6.1
项目Item 规格Specs
RoHS
遥控器必须符合RoHS标准。
The RCU shall comply with RoHS standards.
遥控器必须符合CE标准。
The RCU shall fulfill the relevant CE requirements
CE Directive (9368/EEC)
6.2
CE
EN 60950
EN 62479
For IR only:
EMC Directive (2004/108/EC) through
EN 55022 and EN 55024 for RCU
遥控器必须符合REACH标准。
The RCU shall comply with REACH standards
遥控器必须符合摩托罗拉的W18规范。
The RCU shall comply with Motorola W18 specification.
遥控器必须符合废弃电器电子设备指令（WEEE）
The RCU shall be approved for the Waste Electrical and Electronic Equipment Directive
(WEEE) mark.
6.3
6.4
REACH
W18
6.5
WEEE
Page 7Of 12
4、码表(Code tableve )
Page 8Of 12
5、产品效果图 (Product Cosmetics drawing)
6. 原理图(Schematic diagram)
Page 9Of 12
Page10Of 12
7、爆炸图 (Explosion drawing)
Page 11Of 12
8、产品尺寸图 (Dimension drawing)
9、包装尺寸图 (Packaging drawing)
Page 12 Of 12
Label inside Battery door:
Label for PE plastic package:
Lable for carton box:
Packing drawing：