2024年4月26日发(作者：宰滨海)
ETD3386V
PRELIMINARY
TRANSDUCER
DISPLAY ETD
USER MANUAL
CAUTION
This instruction manual should be read carefully and the
safety instructions observed before installing or operating
the equipment related to this manual.
Apollo Park, Ironstone Lane, Wroxton, Banbury, OX15 6AY
Tel: +44 (0)1869 238400 Fax: +44 (0)1869 238401
Email:***************.ukWeb:
While every precaution has been exercised in the compilation of this document to ensure the
accuracy of its contents, Sensor Technology Ltd, assumes no responsibility for any errors or
omissions. Additionally, no liability is assumed for any damages that may result from the use
of the information contained in this document.
Patents
Sensor Technology Ltd’s RWT series products are manufactured under one of the following
US patents: 5,585,571; 6,237,417; 6,467,351; 6,765,493; 6,838,958; 6,864,759.
Copyright
Copyright 2006-2015 Sensor Technology Ltd. All rights Reserved. Copying or reproducing
of all or any part of the contents of this manual is strictly prohibited without the express
permission of Sensor Technology.
Trademarks
TorqSense is a registered trademark of Sensor Technology Ltd.
TorqView is a trademark of Sensor Technology Ltd.
LabVIEW is a trademark of National Instruments Corporation.
National Instruments is a trademark of National Instruments Corporation.
Windows is a registered trademark of Microsoft Corporation.
Lifetime Warranty
Sensor Technology Ltd’s standard range of torque measuring products are warranted against
manufacturing defects and component failure for two years from date of purchase, subject to
fair wear and tear and return for the first year's free of charge annual re-calibration. This
warranty is extended indefinitely if the equipment is returned to Sensor Technology, or its
distributor, for annual re-calibration, when software and hardware updates, if required, will be
carried out free of charge. Standard range means those products as described in the
company's product data sheets.
Hazard Symbols
Symbol Type of hazard
Dangerous Voltage
Static sensitive components
WARNINGS – Contain information to prevent damage to the equipment.
CAUTIONS – Contain information to prevent personal injury.
Retain the packaging the ETD was delivered in, should it need returning
PRELIMINARY Sensor Technology 2015
Page 1
ETD3386V (Rev 3)
2024年4月26日发(作者：宰滨海)
ETD3386V
PRELIMINARY
TRANSDUCER
DISPLAY ETD
USER MANUAL
CAUTION
This instruction manual should be read carefully and the
safety instructions observed before installing or operating
the equipment related to this manual.
Apollo Park, Ironstone Lane, Wroxton, Banbury, OX15 6AY
Tel: +44 (0)1869 238400 Fax: +44 (0)1869 238401
Email:***************.ukWeb:
While every precaution has been exercised in the compilation of this document to ensure the
accuracy of its contents, Sensor Technology Ltd, assumes no responsibility for any errors or
omissions. Additionally, no liability is assumed for any damages that may result from the use
of the information contained in this document.
Patents
Sensor Technology Ltd’s RWT series products are manufactured under one of the following
US patents: 5,585,571; 6,237,417; 6,467,351; 6,765,493; 6,838,958; 6,864,759.
Copyright
Copyright 2006-2015 Sensor Technology Ltd. All rights Reserved. Copying or reproducing
of all or any part of the contents of this manual is strictly prohibited without the express
permission of Sensor Technology.
Trademarks
TorqSense is a registered trademark of Sensor Technology Ltd.
TorqView is a trademark of Sensor Technology Ltd.
LabVIEW is a trademark of National Instruments Corporation.
National Instruments is a trademark of National Instruments Corporation.
Windows is a registered trademark of Microsoft Corporation.
Lifetime Warranty
Sensor Technology Ltd’s standard range of torque measuring products are warranted against
manufacturing defects and component failure for two years from date of purchase, subject to
fair wear and tear and return for the first year's free of charge annual re-calibration. This
warranty is extended indefinitely if the equipment is returned to Sensor Technology, or its
distributor, for annual re-calibration, when software and hardware updates, if required, will be
carried out free of charge. Standard range means those products as described in the
company's product data sheets.
Hazard Symbols
Symbol Type of hazard
Dangerous Voltage
Static sensitive components
WARNINGS – Contain information to prevent damage to the equipment.
CAUTIONS – Contain information to prevent personal injury.
Retain the packaging the ETD was delivered in, should it need returning
PRELIMINARY Sensor Technology 2015
Page 1
ETD3386V (Rev 3)