NuMicro N9H30系列开发板用户手册说明书-USB迷|专注于互联网分享

2024年7月13日发(作者：泥卿)

NuMaker-HMI-N9H30

NuMicro

Family

Arm

ARM926EJ-S

Based

NuMaker-HMI-N9H30

User Manual

Evaluation Board for NuMicro

N9H30 Series

The information described in this document is the exclusive intellectual property of

Nuvoton Technology Corporation and shall not be reproduced without permission from Nuvoton.

Nuvoton is providing this document only for reference purposes of NuMicro microcontroller

and

microprocessor based system design. Nuvoton assumes no responsibility for errors or omissions.

All data and specifications are subject to change without notice.

For additional information or questions, please contact: Nuvoton Technology Corporation.

Mar. 24, 2022 Page 1 of 39 Rev 1.00

NUMAKER-HMI-N9H30 USER MANUAL

NuMaker-HMI-N9H30

Table of Contents

1 OVERVIEW ...................................................................................................... 5

1.1

Features .......................................................................................................................... 7

1.1.1

NuMaker-N9H30 Main Board Features ......................................................................... 7

1.1.2

NuDesign-TFT-LCD7 Extension Board Features ........................................................ 7

1.2

Supporting Resources .................................................................................................. 8

2 NUMAKER-HMI-N9H30 HARDWARE CONFIGURATION .............................. 9

2.1

NuMaker-N9H30 Board － Front View ....................................................................... 9

2.2

NuMaker-N9H30 Board － 14

2.3

NuDesign-TFT-LCD7 － Front View ......................................................................... 20

2.4

NuDesign-TFT-LCD7 － Rear View .......................................................................... 21

2.5

NuMaker-N9H30 and NuDesign-TFT-LCD7 PCB Placement .............................. 22

3 NUMAKER-N9H30 AND NUDESIGN-TFT-LCD7 SCHEMATICS ................. 24

3.1

NuMaker-N9H30 － GPIO List Circuit ...................................................................... 24

3.2

NuMaker-N9H30 － System Block Circuit ............................................................... 25

3.3

NuMaker-N9H30 － Power Circuit ............................................................................ 26

3.4

NuMaker-N9H30 － N9H30F61IEC Circuit ............................................................. 27

3.5

NuMaker-N9H30 － Setting, ICE, RS-232_0, Key Circuit ..................................... 28

NUMAKER-HMI-N9H30 USER MANUAL

3.6

NuMaker-N9H30 － Memory Circuit ......................................................................... 29

3.7

NuMaker-N9H30 － I

S, I2C_0, RS-485_6 Circuit ................................................. 30

3.8

NuMaker-N9H30 － RS-232_2 Circuit ..................................................................... 31

3.9

NuMaker-N9H30 － LCD Circuit ............................................................................... 32

3.10

NuMaker-N9H30 － CMOS Sensor, I2C_1, CAN_0 Circuit ............................ 33

3.11

NuMaker-N9H30 － RMII_0_PF Circuit ............................................................. 34

3.12

NuMaker-N9H30 － RMII_1_PE Circuit ............................................................. 35

3.13

NuMaker-N9H30 － USB Circuit ......................................................................... 36

3.14

NuDesign-TFT-LCD7 － TFT-LCD7 Circuit ....................................................... 37

4 REVISION HISTORY ..................................................................................... 38

Mar. 24, 2022 Page 2 of 39 Rev 1.00

NuMaker-HMI-N9H30

List of Figures

Figure 1-1 Front View of NuMaker-HMI-N9H30 Evaluation Board .................................................. 5

Figure 1-2 Rear View of NuMaker-HMI-N9H30 Evaluation Board ................................................... 6

Figure 2-1 Front View of NuMaker-N9H30 Board ............................................................................ 9

Figure 2-2 Rear View of NuMaker-N9H30 Board .......................................................................... 14

Figure 2-3 Front View of NuDesign-TFT-LCD7 Board ................................................................... 20

Figure 2-4 Rear View of NuDesign-TFT-LCD7 Board ................................................................... 21

Figure 2-5 Front View of NuMaker-N9H30 PCB Placement .......................................................... 22

Figure 2-6 Rear View of NuMaker-N9H30 PCB Placement .......................................................... 22

Figure 2-7 Front View of NuDesign-TFT-LCD7 PCB Placement ................................................... 23

Figure 2-8 Rear View of NuDesign-TFT-LCD7 PCB Placement ................................................... 23

Figure 3-1 GPIO List Circuit ........................................................................................................... 24

Figure 3-2 System Block Circuit ..................................................................................................... 25

Figure 3-3 Power Circuit ................................................................................................................ 26

Figure 3-4 N9H30F61IEC Circuit ................................................................................................... 27

Figure 3-5 Setting, ICE, RS-232_0, Key Circuit ............................................................................. 28

Figure 3-6 Memory Circuit .............................................................................................................. 29

Figure 3-7 I

S, I2C_0, RS-486_6 Circuit ........................................................................................ 30

Figure 3-8 RS-232_2 Circuit .......................................................................................................... 31

Figure 3-9 LCD Circuit ................................................................................................................... 32

Figure 3-10 CMOS Sensor, I2C_1, CAN_0 Circuit ........................................................................ 33

Figure 3-11 RMII_0_PF Circuit ...................................................................................................... 34

Figure 3-12 RMII_1_PE Circuit ...................................................................................................... 35

Figure 3-13 USB Circuit ................................................................................................................. 36

Figure 3-14 TFT-LCD7 Circuit ........................................................................................................ 37

Mar. 24, 2022 Page 3 of 39 Rev 1.00

NUMAKER-HMI-N9H30 USER MANUAL

NuMaker-HMI-N9H30

List of Tables

Table 2-1 LCD Panel Combination Connector (CON8) Pin Function ............................................ 11

Table 2-2 Three Sets of Indication LED Functions ........................................................................ 12

Table 2-3 Six Sets of User SW, Key 12

Table 2-4 CMOS Sensor Connector (CON10) Function ................................................................ 13

Table 2-5 JTAG ICE Interface (J2) Function .................................................................................. 14

Table 2-6 Expand Port (CON7) Function ....................................................................................... 16

Table 2-7 UART0 (J3) Function ..................................................................................................... 16

Table 2-8 UART2 (J6) Function ..................................................................................................... 16

Table 2-9 RS-485_6 (SW6~8) Function ......................................................................................... 17

Table 2-10 Power on Setting (SW4) Function ............................................................................... 17

Table 2-11 Power on Setting (S2) Function ................................................................................... 17

Table 2-12 Power on Setting (S3) Function ................................................................................... 17

Table 2-13 Power on Setting (S4) Function ................................................................................... 17

Table 2-14 Power on Setting (S5) Function ................................................................................... 17

Table 2-15 Power on Setting (S7/S6) Function ............................................................................. 18

Table 2-16 Power on Setting (S9/S8) Function ............................................................................. 18

Table 2-17 CMOS Sensor Connector (CON9) Function ................................................................ 19

Table 2-18 CAN_0 (SW9~10) Function ......................................................................................... 19

NUMAKER-HMI-N9H30 USER MANUAL

Mar. 24, 2022 Page 4 of 39 Rev 1.00

NuMaker-HMI-N9H30

1 OVERVIEW

The NuMaker-HMI-N9H30 is an evaluation board for GUI application development. The NuMaker-HMI-

N9H30 consists of two parts: a NuMaker-N9H30 main board and a NuDesign-TFT-LCD7 extension

board. The NuMaker-HMI-N9H30 is designed for project evaluation, prototype development and

validation with HMI (Human Machine Interface) function.

The NuMaker-HMI-N9H30 integrates touchscreen display, voice input/output, rich serial port service

and I/O interface, providing multiple external storage methods.

The NuDesign-TFT-LCD7 can be plugged into the main board via the DIN_32x2 extension connector.

The NuDesign-TFT-LCD7 includes one 7” LCD which the resolution is 800x480 with RGB-24bits and

embedded the 4-wires resistive type touch panel.

Figure 1-1 Front View of NuMaker-HMI-N9H30 Evaluation Board

Mar. 24, 2022 Page 5 of 39 Rev 1.00

NUMAKER-HMI-N9H30 USER MANUAL

NuMaker-HMI-N9H30

NUMAKER-HMI-N9H30 USER MANUAL

Mar. 24, 2022

Figure 1-2 Rear View of NuMaker-HMI-N9H30 Evaluation Board

Page 6 of 39 Rev 1.00

NuMaker-HMI-N9H30

1.1 Features

1.1.1 NuMaker-N9H30 Main Board Features

 N9H30F61IEC chip: LQFP216 pin MCP package with DDR (64 MB)

 SPI Flash using W25Q256JVEQ (32 MB) booting with quad mode or storage memory

 NAND Flash using W29N01HVSINA (128 MB) booting or storage memory

 One Micro-SD/TF card slot served either as a SD memory card for data storage or SDIO

(Wi-Fi) device

 Two sets of COM ports:

–

One DB9 RS-232 port with UART_0 used 75C3232E transceiver chip can be served

for function debug and system development.

–

One DB9 RS-232 port with UART_2 used 75C3232E transceiver chip for user

application

 22 GPIO expansion ports, including seven sets of UART functions

 JTAG interface provided for software development

 Microphone input and Earphone/Speaker output with 24-bit stereo audio codec

(NAU88C22) for I

S interfaces

 Six sets of user-configurable push button keys

 Three sets of LEDs for status indication

 Provides SN65HVD230 transceiver chip for CAN bus communication

 Provides MAX3485 transceiver chip for RS-485 device connection

 One buzzer device for program application

 Two sets of RJ45 ports with Ethernet 10/100 Mbps MAC used IP101GR PHY chip

 USB_0 that can be used as Device/HOST and USB_1 that can be used as HOST

supports pen drives, keyboards, mouse and printers

 Provides over-voltage and over current protection used APL3211A chip

 Retain RTC battery socket for CR2032 type and ADC0 detect battery voltage

 System power could be supplied by DC-5V adaptor or USB VBUS

1.1.2 NuDesign-TFT-LCD7 Extension Board Features

 7” resolution 800x480 4-wire resistive touch panel for 24-bits RGB888 interface

 DIN_32x2 extension connector

Mar. 24, 2022 Page 7 of 39 Rev 1.00

NUMAKER-HMI-N9H30 USER MANUAL

NuMaker-HMI-N9H30

1.2 Supporting Resources

For sample codes and introduction about NuMaker-N9H30, please refer to N9H30 BSP:

/products/gui-solution/gui-platform/numaker-hmi-

n9h30/?group=Software&tab=2

Visit NuForum for further discussion about the NuMaker-HMI-N9H30:

/?f=31

NUMAKER-HMI-N9H30 USER MANUAL

Mar. 24, 2022 Page 8 of 39 Rev 1.00

NuMaker-HMI-N9H30

2 NUMAKER-HMI-N9H30 HARDWARE CONFIGURATION

2.1 NuMaker-N9H30 Board － Front View

Combination Connector

CAN Transceiver

(CON8)

RS-485 Transceiver

(U13)

(U11)

RS-232 Transceiver

(U6, U12)

NAND Flash

(U9)

3set Indication LEDs

6 set User SWs

Power Supply Switch

Microphone

(K1~6)

(SW_POWER1)

(LED1~3)

(M1)

Audio Codec

(U10)

Figure 2-1 Front View of NuMaker-N9H30 Board

Figure 2-1 shows the main components and connectors from the front side of NuMaker-N9H30 board.

The following lists components and connectors from the front view:

 NuMaker-N9H30 board and NuDesign-TFT-LCD7 board combination connector (CON8).

This panel connector supports 4-/5-wire resistive touch or capacitance touch panel for 24-

bits RGB888 interface.

Connector GPIO pin of N9H30 Function

CON8.1 - Power 3.3V

CON8.2 - Power 3.3V

CON8.3 GPD7 LCD_CS

CON8.4 GPH3 LCD_BLEN

CON8.5 GPG9 LCD_DEN

CON8.6 GPG8 LCD_VSYNC

Mar. 24, 2022 Page 9 of 39 Rev 1.00

NUMAKER-HMI-N9H30 USER MANUAL

NuMaker-HMI-N9H30

CON8.7

CON8.8

CON8.9

CON8.10

CON8.11

CON8.12

CON8.13

CON8.14

CON8.15

CON8.16

CON8.17

CON8.18

CON8.19

CON8.20

CON8.21

CON8.22

CON8.23

GPG7

GPG6

GPD15

GPD14

GPD13

GPD12

GPD11

GPD10

GPD9

GPD8

GPA15

GPA14

GPA13

GPA12

GPA11

GPA10

GPA9

GPA8

GPA7

GPA6

GPA5

GPA4

GPA3

GPA2

GPA1

GPA0

GPB2

GPG4

Page 10 of 39

LCD_HSYNC

LCD_CLK

LCD_D23(R7)

LCD_D22(R6)

LCD_D21(R5)

LCD_D20(R4)

LCD_D19(R3)

LCD_D18(R2)

LCD_D17(R1)

LCD_D16(R0)

LCD_D15(G7)

LCD_D14(G6)

LCD_D13(G5)

LCD_D12(G4)

LCD_D11(G3)

LCD_D10(G2)

LCD_D9(G1)

LCD_D8(G0)

LCD_D7(B7)

LCD_D6(B6)

LCD_D5(B5)

LCD_D4(B4)

LCD_D3(B3)

LCD_D2(B2)

LCD_D1(B1)

LCD_D0(B0)

LCD_PWM

LCD_RST

Rev 1.00

NUMAKER-HMI-N9H30 USER MANUAL

CON8.24

CON8.25

CON8.26

CON8.27

CON8.28

CON8.29

CON8.30

CON8.31

CON8.32

CON8.33

CON8.34

CON8.35

CON8.36

CON8.37

CON8.38

Mar. 24, 2022

NuMaker-HMI-N9H30

CON8.39 - VSS

CON8.40 - VSS

CON8.41 ADC7 XP

CON8.42 ADC3 Vsen

CON8.43 ADC6 XM

CON8.44 ADC4 YM

CON8.45 - -

CON8.46 ADC5 YP

CON8.47 - VSS

CON8.48 - VSS

CON8.49 GPG0 I2C0_C

CON8.50 GPG1 I2C0_D

CON8.51 GPG5 TOUCH_INT

CON8.52 - -

CON8.53 - -

CON8.54 - -

CON8.55 - -

CON8.56 - -

CON8.57 - -

CON8.58 - -

CON8.59 - VSS

CON8.60 - VSS

CON8.61 - -

CON8.62 - -

CON8.63 - Power 5V

CON8.64 - Power 5V

Table 2-1 LCD Panel Combination Connector (CON8) Pin Function

 Power supply switch (SW_POWER1): System will be powered on if the SW_POWER1

button is pressed

 Three sets of indication LEDs:

LED Color Descriptions

LED1 Red

The system power will be

terminated and LED1 lighting

Mar. 24, 2022 Page 11 of 39 Rev 1.00

NUMAKER-HMI-N9H30 USER MANUAL

NuMaker-HMI-N9H30

when the input voltage exceeds

5.7V or the current exceeds 2A.

LED2

LED3

Green

Power normal state.

Controlled by GPH2 pin

Table 2-2 Three Sets of Indication LED Functions

 Six sets of user SW, Key Matrix for user definition

Key

GPIO pin of N9H30

GPF10

GPB4

GPF10

GPB5

GPE15

GPB4

GPE15

GPB5

GPE14

GPB4

GPE14

GPB5

Table 2-3 Six Sets of User SW, Key Matrix Functions



NAND Flash (128 MB) with Winbond W29N01HVS1NA (U9)

Microphone (M1): Through Nuvoton NAU88C22 chip sound input

Audio CODEC chip (U10): Nuvoton NAU88C22 chip connected to N9H30 using I

interface

–

Function

Row0

Col0

Row0

Col1

Row1

Col0

Row1

Col1

Row2

Col0

Row2

Col1

NUMAKER-HMI-N9H30 USER MANUAL

SW6/SW7/SW8: 1-2 short for RS-485_6 function and connected to 2P terminal (CON5

and J5)

SW6/SW7/SW8: 2-3 short for I

S function and connected to NAU88C22 (U10).

–

 CMOS Sensor connector (CON10, SW9~10)

–

SW9~10: 1-2 short for CAN_0 function and connected to 2P terminal (CON11)

SW9~10: 2-3 short for CMOS sensor function and connected to CMOS sensor

connector (CON10)

GPIO pin of N9H30

Page 12 of 39

Function

VSS

Rev 1.00

Connector

CON10.1

CON10.2

Mar. 24, 2022

NuMaker-HMI-N9H30

CON10.3 - Power 3.3V

CON10.4 - Power 3.3V

CON10.5 - -

CON10.6 - -

CON10.7 GPI4 S_PCLK

CON10.8 GPI3 S_CLK

CON10.9 GPI8 S_D0

CON10.10 GPI9 S_D1

CON10.11 GPI10 S_D2

CON10.12 GPI11 S_D3

CON10.13 GPI12 S_D4

CON10.14 GPI13 S_D5

CON10.15 GPI14 S_D6

CON10.16 GPI15 S_D7

CON10.17 GPI6 S_VSYNC

CON10.18 GPI5 S_HSYNC

CON10.19 GPI0 S_PWDN

CON10.20 GPI7 S_nRST

CON10.21 GPG2 I2C1_C

CON10.22 GPG3 I2C1_D

CON10.23 - VSS

CON10.24 - VSS

Table 2-4 CMOS Sensor Connector (CON10) Function

Mar. 24, 2022 Page 13 of 39 Rev 1.00

NUMAKER-HMI-N9H30 USER MANUAL

NuMaker-HMI-N9H30

2.2 NuMaker-N9H30 Board － Rear View

RS-485_6 Terminal

RTC Battery

(BT1)

(CON5)

Power On Setting

(SW4, S2~S9)

CMOS Sensor

Connector (CON9)

CAN_0 Terminal

(CON11)

USB0 Device/Host

(CON14)

RS-232 DB9

(CON2,CON6)

USB1 HOST

(CON15)

RJ45 (CON12,

CON13)

Expand Port

(CON7)

Speaker Output

(J4)

Earphone Output

(CON4)

Buzzer

(BZ1)

RMII PHY

(U14,U16)

Micro SD Slot

(CON3)

5V In (CON1)

System Reset

SPI Flash

N9H30F61IEC

JTAG ICE

SW (SW5)

(U7,U8)

(U5)

(J2)

Power Protection

IC (U1)

Figure 2-2 Rear View of NuMaker-N9H30 Board

Figure 2-2 shows the main components and connectors from the rear side of NuMaker-N9H30 board.

The following lists components and connectors from the rear view:



+5V In (CON1): Power adaptor 5V input

JTAG ICE interface (J2)

Connector

J2.1

J2.2

J2.3

J2.4

J2.5

J2.6

J2.7

J2.8

GPIO pin of N9H30

GPJ4

GPJ2

GPJ1

GPJ0

GPJ3

Table 2-5 JTAG ICE Interface (J2) Function

 SPI Flash (32 MB) with Winbond W25Q256JVEQ (U7); only one (U7 or U8) SPI Flash

Page 14 of 39 Rev 1.00

Function

Power 3.3V

nTRST

TDI

TMS

TCK

VSS

TD0

RESET

NUMAKER-HMI-N9H30 USER MANUAL

Mar. 24, 2022

NuMaker-HMI-N9H30

can be used

 System Reset (SW5): System will be reset if the SW5 button is pressed

 Buzzer (BZ1): Control by GPB3 pin of N9H30

 Speaker output (J4): Through the NAU88C22 chip sound output

 Earphone output (CON4): Through the NAU88C22 chip sound output

 Expand port for user use (CON7):

Connector GPIO pin of N9H30 Function

CON7.1 - Power 3.3V

CON7.2 - Power 3.3V

CON7.3 GPE12 UART3_TXD

CON7.4 GPH4 UART1_TXD

CON7.5 GPE13 UART3_RXD

CON7.6 GPH5 UART1_RXD

CON7.7 GPB0 UART5_TXD

CON7.8 GPH6 UART1_RTS

CON7.9 GPB1 UART5_RXD

CON7.10 GPH7 UART1_CTS

CON7.11 GPI1 UART7_TXD

CON7.12 GPH8 UART4_TXD

CON7.13 GPI2 UART7_RXD

CON7.14 GPH9 UART4_RXD

CON7.15 - -

CON7.16 GPH10 UART4_RTS

CON7.17 - -

CON7.18 GPH11 UART4_CTS

CON7.19 - VSS

CON7.20 - VSS

CON7.21 GPB12 UART10_TXD

CON7.22 GPH12 UART8_TXD

CON7.23 GPB13 UART10_RXD

CON7.24 GPH13 UART8_RXD

CON7.25 GPB14 UART10_RTS

Mar. 24, 2022 Page 15 of 39 Rev 1.00

NUMAKER-HMI-N9H30 USER MANUAL

NuMaker-HMI-N9H30

CON7.26

CON7.27

CON7.28

CON7.29

CON7.30

GPH14

GPB15

GPH15

Table 2-6 Expand Port (CON7) Function

 UART0 selection (CON2, J3):

–

UART8_RTS

UART10_CTS

UART8_CTS

Power 5V

RS-232_0 function and connected to DB9 female (CON2) for debug message output.

GPE0/GPE1 connected to 2P terminal (J3).

GPIO pin of N9H30

GPE1

GPE0

Table 2-7 UART0 (J3) Function

Function

UART0_RXD

UART0_TXD

Connector

J3.1

J3.2

 UART2 selection (CON6, J6):

–

RS-232_2 function and connected to DB9 female (CON6) for debug message output

GPF11~14 connected to 4P terminal (J6)

GPIO pin of N9H30

GPF11

GPF12

GPF13

GPF14

Table 2-8 UART2 (J6) Function

Function

UART2_TXD

UART2_RXD

UART2_RTS

UART2_CTS

Connector

NUMAKER-HMI-N9H30 USER MANUAL

J6.1

J6.2

J6.3

J6.4

 RS-485_6 selection (CON5, J5, SW6~8):

–

SW6~8: 1-2 short for RS-485_6 function and connected to 2P terminal (CON5 and J5)

SW6~8: 2-3 short for I

S function and connected to NAU88C22 (U10)

GPIO pin of N9H30

GPG11

Function

RS-485_6_DI

I2S_DO

RS-485_6_RO

I2S_DI

RS-485_6_ENB

I2S_BCLK

Rev 1.00

Connector

SW6:1-2 short

SW6:2-3 short

SW7:1-2 short

SW7:2-3 short

SW8:1-2 short

SW8:2-3 short

Mar. 24, 2022

GPG12

GPG13

Page 16 of 39

NuMaker-HMI-N9H30

Table 2-9 RS-485_6 (SW6~8) Function

 Power on setting (SW4, S2~9).

SW State Function

SW4.2/SW4.1 ON/ON Boot from USB

SW4.2/SW4.1 ON/OFF Boot from eMMC

SW4.2/SW4.1 OFF/ON Boot from NAND Flash

SW4.2/SW4.1 OFF/OFF Boot from SPI Flash

Table 2-10 Power on Setting (SW4) Function

SW State Function

S2 Short

System clock from 12MHz

crystal

S2 Open System clock from UPLL output

Table 2-11 Power on Setting (S2) Function

SW State Function

S3 Short Watchdog Timer OFF

S3 Open Watchdog Timer ON

Table 2-12 Power on Setting (S3) Function

SW State Function

S4 Short GPJ[4:0] used as GPIO pin

Open

GPJ[4:0] used as JTAG ICE

interface

Table 2-13 Power on Setting (S4) Function

SW State Function

S5 Short UART0 debug message ON

S5 Open UART0 debug message OFF

Table 2-14 Power on Setting (S5) Function

SW State Function

S7/S6 Short/Short NAND Flash page size 2KB

S7/S6 Short/Open NAND Flash page size 4KB

S7/S6 Open/Short NAND Flash page size 8KB

Mar. 24, 2022 Page 17 of 39 Rev 1.00

NUMAKER-HMI-N9H30 USER MANUAL

NuMaker-HMI-N9H30

S7/S6 Open/Open

Table 2-15 Power on Setting (S7/S6) Function

S9/S8

State

Short/Short

Short/Open

Open/Short

Open/Open

Table 2-16 Power on Setting (S9/S8) Function

 CMOS Sensor connector (CON9, SW9~10)

–

Ignore

Function

NAND Flash ECC type BCH T12

NAND Flash ECC type BCH T15

NAND Flash ECC type BCH T24

Ignore

SW9~10: 1-2 short for CAN_0 function and connected to 2P terminal (CON11).

SW9~10: 2-3 short for CMOS sensor function and connected to CMOS sensor

connector (CON9).

GPIO pin of N9H30

GPI4

GPI3

GPI8

GPI9

GPI10

GPI11

GPI12

GPI13

GPI14

GPI15

GPI6

GPI5

GPI0

Page 18 of 39

Function

VSS

Power 3.3V

S_PCLK

S_CLK

S_D0

S_D1

S_D2

S_D3

S_D4

S_D5

S_D6

S_D7

S_VSYNC

S_HSYNC

S_PWDN

Rev 1.00

Connector

CON9.1

CON9.2

CON9.3

CON9.4

NUMAKER-HMI-N9H30 USER MANUAL

CON9.5

CON9.6

CON9.7

CON9.8

CON9.9

CON9.10

CON9.11

CON9.12

CON9.13

CON9.14

CON9.15

CON9.16

CON9.17

CON9.18

CON9.19

Mar. 24, 2022

NuMaker-HMI-N9H30

CON9.20 GPI7 S_nRST

CON9.21 GPG2 I2C1_C

CON9.22 GPG3 I2C1_D

CON9.23 - VSS

CON9.24 - VSS

Table 2-17 CMOS Sensor Connector (CON9) Function

 CAN_0 Selection (CON11, SW9~10):

–

SW9~10: 1-2 short for CAN_0 function and connected to 2P terminal (CON11)

–

SW9~10: 2-3 short for CMOS sensor function and connected to CMOS sensor

connector (CON9, CON10)

SW GPIO pin of N9H30 Function

SW9:1-2 short CAN_0_RXD

GPI3

SW9:2-3 short S_CLK

SW10:1-2 short CAN_0_TXD

GPI4

SW10:2-3 short S_PCLK

Table 2-18 CAN_0 (SW9~10) Function

 USB0 Device/HOST Micro-AB connector (CON14), where CON14 pin4 ID=1 is Device,

ID=0 is HOST

 USB1 for USB HOST with Type-A connector (CON15)

 RJ45_0 connector with LED indicator (CON12), RMII PHY with IP101GR (U14)

 RJ45_1 connector with LED indicator (CON13), RMII PHY with IP101GR (U16)

 Micro-SD/TF card slot (CON3)

 SOC CPU: Nuvoton N9H30F61IEC (U5)

 Battery power for RTC 3.3V powered (BT1, J1), can detect voltage by ADC0

 RTC power has 3 sources:

–

Share with 3.3V I/O power

–

Battery socket for CR2032 (BT1)

–

External connector (J1)

 Board version 2.1

Mar. 24, 2022 Page 19 of 39 Rev 1.00

NUMAKER-HMI-N9H30 USER MANUAL

NuMaker-HMI-N9H30

2.3 NuDesign-TFT-LCD7 － Front View

Figure 2-3 Front View of NuDesign-TFT-LCD7 Board

Figure 2-3 shows the main components and connectors from the Front side of NuDesign-TFT-LCD7

board.



Mar. 24, 2022 Page 20 of 39 Rev 1.00

7” resolution 800x480 4-W resistive touch panel for 24-bits RGB888 interface

NUMAKER-HMI-N9H30 USER MANUAL

NuMaker-HMI-N9H30

2.4 NuDesign-TFT-LCD7 － Rear View

Figure 2-4 Rear View of NuDesign-TFT-LCD7 Board

Figure 2-4 shows the main components and connectors from the rear side of NuDesign-TFT-LCD7

board.

 NuMaker-N9H30 and NuDesign-TFT-LCD7 combination connector (CON1).

Mar. 24, 2022 Page 21 of 39 Rev 1.00

NUMAKER-HMI-N9H30 USER MANUAL

NuMaker-HMI-N9H30

2.5 NuMaker-N9H30 and NuDesign-TFT-LCD7 PCB Placement

Figure 2-5 Front View of NuMaker-N9H30 PCB Placement

NUMAKER-HMI-N9H30 USER MANUAL

Figure 2-6 Rear View of NuMaker-N9H30 PCB Placement

Mar. 24, 2022 Page 22 of 39 Rev 1.00

NuMaker-HMI-N9H30

Figure 2-7 Front View of NuDesign-TFT-LCD7 PCB Placement

Figure 2-8 Rear View of NuDesign-TFT-LCD7 PCB Placement

Mar. 24, 2022 Page 23 of 39 Rev 1.00

NUMAKER-HMI-N9H30 USER MANUAL

NuMaker-HMI-N9H30

3 NUMAKER-N9H30 AND NUDESIGN-TFT-LCD7 SCHEMATICS

3.1 NuMaker-N9H30 － GPIO List Circuit

Figure 3-1 shows the N9H30F61IEC GPIO list circuit.

Figure 3-1 GPIO List Circuit

NUMAKER-HMI-N9H30 USER MANUAL

Mar. 24, 2022 Page 24 of 39 Rev 1.00

NuMaker-HMI-N9H30

3.2 NuMaker-N9H30 － System Block Circuit

Figure 3-2 shows the System Block Circuit.

Figure 3-2 System Block Circuit

Mar. 24, 2022 Page 25 of 39 Rev 1.00

NUMAKER-HMI-N9H30 USER MANUAL

NuMaker-HMI-N9H30

3.3 NuMaker-N9H30 － Power Circuit

Figure 3-3 shows the Power Circuit.

NUMAKER-HMI-N9H30 USER MANUAL

Figure 3-3 Power Circuit

Mar. 24, 2022 Page 26 of 39 Rev 1.00

NuMaker-HMI-N9H30

3.4 NuMaker-N9H30 － N9H30F61IEC Circuit

Figure 3-4 shows the N9H30F61IEC Circuit.

Figure 3-4 N9H30F61IEC Circuit

Mar. 24, 2022 Page 27 of 39 Rev 1.00

NUMAKER-HMI-N9H30 USER MANUAL

NuMaker-HMI-N9H30

3.5 NuMaker-N9H30 － Setting, ICE, RS-232_0, Key Circuit

Figure 3-5 shows the Setting, ICE, RS-232_0, Key Circuit.

NUMAKER-HMI-N9H30 USER MANUAL

Figure 3-5 Setting, ICE, RS-232_0, Key Circuit

Mar. 24, 2022 Page 28 of 39 Rev 1.00

NuMaker-HMI-N9H30

3.6 NuMaker-N9H30 － Memory Circuit

Figure 3-6 shows the Memory Circuit.

Figure 3-6 Memory Circuit

Mar. 24, 2022 Page 29 of 39 Rev 1.00

NUMAKER-HMI-N9H30 USER MANUAL

NuMaker-HMI-N9H30

3.7 NuMaker-N9H30 － I

S, I2C_0, RS-485_6 Circuit

Figure 3-7 shows the I

S, I2C_0, RS-486_6 Circuit.

NUMAKER-HMI-N9H30 USER MANUAL

Figure 3-7 I

S, I2C_0, RS-486_6 Circuit

Mar. 24, 2022 Page 30 of 39 Rev 1.00

NuMaker-HMI-N9H30

3.8 NuMaker-N9H30 － RS-232_2 Circuit

Figure 3-8 shows the RS-232_2 Circuit.

Figure 3-8 RS-232_2 Circuit

Mar. 24, 2022 Page 31 of 39 Rev 1.00

NUMAKER-HMI-N9H30 USER MANUAL

NuMaker-HMI-N9H30

3.9 NuMaker-N9H30 － LCD Circuit

Figure 3-9 shows the LCD Circuit.

NUMAKER-HMI-N9H30 USER MANUAL

Figure 3-9 LCD Circuit

Mar. 24, 2022 Page 32 of 39 Rev 1.00

NuMaker-HMI-N9H30

3.10 NuMaker-N9H30 － CMOS Sensor, I2C_1, CAN_0 Circuit

Figure 3-10 shows the CMOS Sensor,I2C_1, CAN_0 Circuit.

Figure 3-10 CMOS Sensor, I2C_1, CAN_0 Circuit

Mar. 24, 2022 Page 33 of 39 Rev 1.00

NUMAKER-HMI-N9H30 USER MANUAL

NuMaker-HMI-N9H30

3.11 NuMaker-N9H30 － RMII_0_PF Circuit

Figure 3-11 shows the RMII_0_RF Circuit.

NUMAKER-HMI-N9H30 USER MANUAL

Figure 3-11 RMII_0_PF Circuit

Mar. 24, 2022 Page 34 of 39 Rev 1.00

NuMaker-HMI-N9H30

3.12 NuMaker-N9H30 － RMII_1_PE Circuit

Figure 3-12 shows the RMII_1_PE Circuit.

Figure 3-12 RMII_1_PE Circuit

Mar. 24, 2022 Page 35 of 39 Rev 1.00

NUMAKER-HMI-N9H30 USER MANUAL

NuMaker-HMI-N9H30

3.13 NuMaker-N9H30 － USB Circuit

Figure 3-13 shows the USB Circuit.

NUMAKER-HMI-N9H30 USER MANUAL

Figure 3-13 USB Circuit

Mar. 24, 2022 Page 36 of 39 Rev 1.00

NuMaker-HMI-N9H30

3.14 NuDesign-TFT-LCD7 － TFT-LCD7 Circuit

Figure 3-14 shows the TFT-LCD7 Circuit.

Figure 3-14 TFT-LCD7 Circuit

Mar. 24, 2022 Page 37 of 39 Rev 1.00

NUMAKER-HMI-N9H30 USER MANUAL

NuMaker-HMI-N9H30

4 REVISION HISTORY

Date

2022.03.24

Revision

1.00

Description

 Initial version

NUMAKER-HMI-N9H30 USER MANUAL

Mar. 24, 2022

Page 38 of 39 Rev 1.00

NuMaker-HMI-N9H30

Important Notice

Nuvoton Products are neither intended nor warranted for usage in systems or equipment, any

malfunction or failure of which may cause loss of human life, bodily injury or severe property

damage. Such applications are deemed, “Insecure Usage”.

Insecure usage includes, but is not limited to: equipment for surgical implementation, atomic

energy control instruments, airplane or spaceship instruments, the control or operation of

dynamic, brake or safety systems designed for vehicular use, traffic signal instruments, all types

of safety devices, and other applications intended to support or sustain life.

All Insecure Usage shall be made at customer’s risk, and in the event that third parties lay claims

to Nuvoton as a result of customer’s Insecure Usage, customer shall indemnify the damages

and liabilities thus incurred by Nuvoton.

Mar. 24, 2022 Page 39 of 39 Rev 1.00