马歇尔CV503-WP全天候HD微型摄像头用户手册说明书-USB迷|专注于互联网分享

2024年8月17日发(作者：旗意)

st A/V D

CV503-WP

All-Weather HD Miniature Camera

User Manual

Table of Contents

1. Menu Structure

2. OSD Joystick and Button

3. WB Control

4. AE Control

5. Day / Night

6. Image Control

7. Special

8. Setup

9. Reset

10. Exit

11. Troubleshooting

Warranty

END

CV503-WP Manual

1. Menu Structure

SETUPSUB MENUSUB MENU

ATW

ONE PUSH

WB CONTROL

INDOOR

OUTDOOR

MANUAL

BLUE

RED

AGC MAX

SENS UP

AUTOAE BRIGHT

FLK CONTROL

LENS MODE (DC IRIS ONLY)

SHUTTER

AGC MAX

SHUT FIXSENS UP

AE BRIGHT

AE CONTROL

FLK CONTROL

AGC

AGC FIX

AE BRIGHT

FLK CONTROL

LENS MODE (DC IRIS ONLY)

SHUTTER

IRIS

MANUALAGC

FLK CONTROL

LENS MODE (DC IRIS ONLY)

DAY / NIGHT

DAY

NIGHTNIGHT COLOR

LENS SHADING

IMAGE CONTROLCONTRAST

BRIGHTNESS

CV503-WP Manual

SETUPSUB MENUSUB MENU

SATURATION

HUE

EDGE ENHANCE

AUTO SATURATE

IMAGE CONTROL

AUTO EDGE

BLACK WHITE LEVEL

GAMMA CORRECT

DNR

DNR MODE

DNR LEVEL

DZOOM

DEFOG

DIS

BACKLIGHT

SPECIAL

BINNING

DEFECT PIXEL

DISP FUNCTION

WDR

FLICKER DETECT

PRIVACY

CAM TITLE

SETUP

COMMUNICATIONRS-485/ID

SYSTEM INFO

OUTPUT FORMAT

RESETUSER/FACTORY

EXIT

2. OSD Joystick and Button

4L1

I/O Cable (included in box) for CV503, CV506, CV344, CV346

1. SET Used to access the menu and confrim selection.

2. UP Used to move the cursor up.

3. DOWN Used to move the cursor down.

4. LEFT Used to move the cursor left and change the value

5. RIGHT Used to move the cursor to the right and change the value.

Press SET button to access the Main Menu

WB CONTROL

AE CONTROL

DAY/NIGHT

IMAGE CONTROL

SPECIAL

SETUP

RESET

EXIT

3. WB CONTROL

Select WB CONTROL using the UP or DOWN button. You can change between AUTO, ATW, PUSH,

and MANUAL using the LEFT or RIGHT buttons.

• ATW: Continuously adjusts camera color balance in accordance with any change in color

temperature. Compensates for color temperature changes within the range of 1,900°K to

11,000°K.

• ONE PUSH: Color temperature will be manually adjusted by pushing the OSD button. Place

the white paper in front of the camera when OSD button is pressed to obtain the optimum

result.

• MANUAL: Select this to fine-tune White Balance manually.

You can adjust the blue and red tone level manually.

1. BLUE: Adjust the Blue tone of the image. (0~100)

2. RED: Adjust the Red tone of the image. (0~100)

• INDOOR: Select this to adjust white balance to indoor lighting condition.

• OUTDOOR: Select this to adjust white balance to outdoor lighting condition.

MENUWB CONTROL

WB CONTROL

MODE

MANUAL

AE CONTROL

PUSH

DAY/NIGHT

BLUE

AUDIO

RED

IMAGE CONTROL

RETURN

SPECIAL

SETUP

RESET

EXIT

1. Adjust White Balance first by using the ATW mode before switching to MANUAL mode.

2. White Balance may not work properly under the following conditions. In this case, select

the ATW mode.

• When the ambient illumination of the subject is dim.

• If the camera is directed towards a fluorescent light or is installed in place where

illumination changes dramatically, the White Balance operation may become unstable.

CV503-WP Manual

4. AE CONTROL

Select AE CONTROL using the UP or DOWN button. You can select one sub-mode using the UP or

DOWN buttons.

MENUAE CONTROL

WB CONTROL

AE MODE

AUTO

AE CONTROL

SHUTTER

DAY/NIGHT

IRIS

AUDIO

AGC

IMAGE CONTROL

AGCMAX

SPECIAL

SENS UP

OFF

SETUP

AE BRIGHT

RESET

FLK CONTROL

OFF

EXIT

LENS MODE

RETURN

• AUTO: Adjusts the exposure level automatically. Detailed fine tuning options are available

under this menu.

• SHUT FIX: Provides more detailed shutter speed options. All other controls are tuned for the

selected shutter speed.

• AGC FIX: Provides more detailed gain option. All other controls are tuned for the selected gain

value.

• MANUAL: Adjusts the exposure level manually.

1. SHUTTER: Speed can be set at auto or manual. (1/30~1/10,000)

2. IRIS SPEED: Electronic Iris speed can be controlled, for DC Iris lens only. (0~5)

3. AGC: Electronic Iris speed can be controlled, for DC Iris lens only. (0~5)

4. AGC MAX: Used to set maximum gain value to control the video noise caused by Auto

Gain Control. (Off, Low, Middle, High, DMIN, DMID, DMAX)

5. SENS UP: Controls the digital slow shutter to allow extra light into the camera and adjust

the picture quality. (Off, x2~x10)

6. AE BRIGHT: Select this to adjust auto exposure brightness levels. (0~10)

7. LENS MODE: Lens setting will be optimized for selected environment, for DC Iris lens only.

8. FLK CONTROL: Provides a proper image sensor frequency to match the power frequency

in order to minimize video flicker.

5. DAY / NIGHT

Select DAY / NIGHT using the UP or DOWN button. You can select one sub-mode from AUTO,

COLOR, and NIGHT using the UP or DOWN buttons.

• MODE: Auto, Day, Night

• AUTO: Camera will change between day and night mode when the light condition

changes.

• DAY: Camera will stay on day mode.

• NIGHT: Camera will stay on night mode.

• DELAY [SEC]: Delay time of changing mode can be adjusted from this menu.

• D->N LEVEL: Change the camera threshold value of Day to Night mode.

• N->D LEVEL: Change the camera threshold value of Night to Day mode.

• NIGHT COLOR: Change the camera threshold value of Night to Day mode.

MENUDAY/NIGHT

WB CONTROL

MODE

AUTO

AE CONTROL

DELAY [SEC]

DAY/NIGHT

D->N LEVEL

IMAGE CONTROL

N->D LEVEL

SPECIAL

NIGHT COLOR

OFF

SETUP

RETURN

RESET

EXIT

CV503-WP Manual

6. IMAGE CONTROL

Select IMAGE CONTROL using the UP or DOWN button.

You can select LENS SHADING, CONTRAST, HUE, And EDGE ENHANCE using the UP or DOWN

buttons.

MENUIMAGE CONTROL

WB CONTROL

LENS SHADING

OFF

AE CONTROL

CONTRAST

DAY/NIGHT

BRIGHTNESS

IMAGE CONTROL

SATURATION

SPECIAL

HUE

SETUP

EDGE ENHANCE

RESET

AUTO SATURATE

MIDDLE

EXIT

AUTO EDGE

BLACK WHITE LV

GAMMA CORRECT

DEFAULT

DNR

RETURN

• LENS SHADING: Corrects inconsistent brightness level in the image.

• CONTRAST: Adjust the image contrast level value.

• BRIGHTNESS: Adjust the image brightness level value.

• SATURATION: Adjust the image saturation level value.

• HUE: Adjust the image hue level value.

• EDGE ENHANCED: Adjust the image sharpness level.

• AUTO SATURATE: Decrease saturation automatically when noise scene is detected.

• AUTO EDGE: Adjust line sharpness level automatically.

• BLACK WHITE LEVEL: Adjust the image black level value.

• GAMMA CORRECT: Adjust the image output gamma level.

• DNR: Reduces the video noise at low ambient light.

Select the DNR level from OFF, LOW, MIDDLE, and HIGH using the LEFT or RIGHT button.

7. SPECIAL

Select SPECIAL using the UP or DOWN button.

You can select DEFOG, MOTION DETECT, BACKLIGHT, DEFECT PIXEL, and FLICKER DETECT using

the UP or DOWN buttons.

MENUSPECIAL

WB CONTROL

DZOOM

OFF

AE CONTROL

DEFOG

OFF

DAY/NIGHT

DIS

OFF

IMAGE CONTROL

BACKLIGHT

OFF

SPECIAL

BINNING

OFF

SETUP

DEFECT PIXEL

RESET

DISP FUNCTION

EXIT

WDR

OFF

FLICKER DETECT

OFF

PRIVACY

RETURN

• DZOOM: Digitally zoom the video by the desired ratio.

• DEFOG: This feature will help increase visibility in extreme weather conditions, such as fog,

rain or in a very strong luminous intensity.

• DIS: This feature enables digital image stabilization.

• BACKLIGHT: Adjust backlight compensation by choosing either BLC HLM from this menu.

• BINNING: Enable or disable pixel binning.

• DEFECT PIXEL: Advanced defective pixel correction menu.

• DISP FUNCTION: Display effect such as freeze mirror, rotation, and style can be applied from

this menu.

• WDR: This feature enables user to view both object and background more clearly when

background is too bright.

• FLICKER DETECT: Adjust the image sensor frequency to match the power frequency.

• PRIVACY: Mask an area you want to hide on the screen by applying the privacy zones.

CV503-WP Manual

8. SETUP

CAMERA setup can be adjusted from this menu.

You can select CAMERA ID, Communication, System Info, and Output Format using the UP or DOWN

buttons.

MENUSETUP

WB CONTROL

CAM TITLE

OFF

AE CONTROL

COMMUNICATION

DAY/NIGHT

SYSTEM INFO

IMAGE CONTROL

OUTPUT FORMAT

1080p 59.94

SPECIAL

RETURN

SETUP

RESET

EXIT

• CAM TITLE: Camera title can be turned ON or OFF.

• COMMUNICATION: VISCA communication can be adjusted.

1. CAM ID: Camera ID can be setup. (0~7)

2. ID DISPLAY: Camera ID display can be displayed.

3. BAUDRATE: Camera baudrate can be set.

(2400, 4800, 9600, 19200, 38400)

• SYSTEM INFO: Camera information can be found under this menu.

• OUTPUT FORMAT: Camera resolution and frame rate can be set.

(1080 by default)

Select the FRAME RATE using the LEFT or RIGHT buttons.

Available Frame Rates are:

1920 x 1080p 60, 59.94, 50, 30, 29.97, 25, 24, 23

1920 x 1080i 60, 59.94, 50

1280 x 720p 60, 59.94, 50

9. RESET

Select RESET using the UP or DOWN buttons.

• RESET: Reset the camera settings the factory defaults or user setting value.

MENURESET

WB CONTROL

RESET MODE

FACTORY

AE CONTROL

RESET

DAY/NIGHT

SAVE AS USER

IMAGE CONTROL

RETURN

SPECIAL

SETUP

RESET

EXIT

• ON: Set the camera setting to either “FACTORY” or “USER” of “CHANGE” menu. Make sure

to select the right mode from “CHANGE” before defaulting the camera.

• RESET MODE: Select the desired setting mode.

Select from USER or FACTORY using the LEFT or RIGHT button.

1. USER: Select “USER” if setting value user saved last is needed.

2. FACTORY: Select “FACTORY” if factory default setting is needed.

“FRAME RATE”, “CAM ID”, and “BAUDRATE” will note change.

10. EXIT

Select EXIT using the UP or DOWN button.

WB CONTROL

AE CONTROL

DAY/NIGHT

IMAGE CONTROL

SPECIAL

SETUP

RESET

EXIT

• SAVE: Exit the setup after saving the value changes.

CV503-WP Manual

11. TROUBLESHOOTING

Before sending the camera for repair, please check below to make sure that the camera is

installed correctly. If it still does not perform adequately, please consult with your supplier.

ProblemSolution

1. Check that all connected devices are powered on.

2. Confirm that the voltage is correct.

Nothing appears on the

3. Confirm that the power supply provides enough current to

screen.

power the camera.

4. Check that all video cables are properly connected.

1. Check that your monitor is correctly adjusted.

2. Confirm that the glass in front of the lens is clean. If there is

dust, dirt or fingerprints on the glass, the image quality will be

The picture is not clear.

affected.

3. To clean the glass, use a soft, dry and non-abrasive cloth or a

commercially available lens cleaning set.

4. Adjust the focus by carefully rotating the threaded M12 lens.

1. Ensure that the camera is not positioned near a high voltage

source, such as a power generator.

The picture has interference.

2. Check that the connected BNC cable is terminated properly.

3. Check that all video cables are properly connected.

1. Check the termination and set the impedance at 75Ω properly.

2. Ensure that the camera is not pointing towards the Sun or any

The picture is flickering

light source.

continually.

3. Check the performance of any intermediate devices.

4. Check if the distance of the video cable exceeds the maximum

transferable limitation.

Warranty

Marshall Electronics warranties to the first consumer that this device will, under normal use,

be free from defects in workmanship and materials, when received in its original container, for

a period of two years from the purchase date. This warranty is extended to the first consumer

only, and proof of purchase is necessary to honor the warranty. If there is no proof of purchase

provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty

set forth above. Therefore, labor and parts may be charged to the consumer. This warranty

does not apply to the product exterior or cosmetics. Misuse, abnormal handling, alterations or

modifications in design or construction void this warranty. No sales personnel of the seller or

any other person is authorized to make any warranties other than those described above, or to

extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period

described above.

Due to constant effort to improve products and product features, specifications may change

without notice.

20608 Madrona Avenue, Torrance, CA 90503

Tel: (800) 800-6608 / (310) 333-0606 • Fax: 310-333-0688

************************