2024年11月1日发(作者：告力)
Clock Radio
3000
Series
R3505
User manual
Register your product and get support at
/support
Contents
1 Important
2
7 Product information
Safety 2
8 Troubleshooting
2
Introduction 3
Your clock radio
3
What's in the box
9 Notice
Overview of the clock radio
3
3
3 Get started
Install batteries
4
Connect power
4
Set time
4
Turn on
4
4
4 Listen to DAB+ radio
Tune to DAB+ radio stations
5
Store DAB+ radio stations automatically
5
Store DAB+ radio stations manually
5
Select a preset DAB+ radio station
5
Show DAB+ information
5
Use DAB+ menu
5
6
5 Listen to FM radio
Tune to FM radio stations
6
Store FM radio stations automatically
6
Store FM radio stations manually
6
Select a preset radio station
6
Show RDS information
7
Use FM menu
7
7
6 Other features
Set alarm time
8
Set sleep timer
8
Adjust volume
8
Adjust display brightness
8
8
9
9
10
EN
1
1 Important
Safety
Warning
•
•
Never remove the casing of this clock radio.
•
Never lubricate any part of this clock radio.
Never place this clock radio on other
•
electrical equipment.
Keep this clock radio away from direct
•
sunlight,
Make sure that you always have easy access
naked flames or heat.
to the power cord,
disconnect the clock radio from the power.
plug or adaptor to
•
•
Read these instructions.
•
Heed all warnings.
•
Follow all instructions.
Do not block any ventilation openings. Install in
•
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as
radiators, heat registers, stoves,
•
(including amplifiers) that produce heat.
or other apparatus
Protect the power cord from being walked on
or pinched,
receptacles,
particularly at plugs, convenience
•
from the clock radio.
and the point where they exit
Only use attachments/accessories specified by
•
the manufacturer.
Unplug this apparatus during lightning storms
•
or when unused for long periods of time.
Refer all servicing to qualified service
personnel.
apparatus has been damaged in any way,
Servicing is required when the
as power-supply cord or plug is damaged,
such
liquid has been spilled or objects have fallen
into the apparatus,
exposed to rain or moisture,
the apparatus has been
•
normally,
Battery usage CAUTION -
or has been dropped.
does not operate
leakage which may result in bodily injury,
To prevent battery
property damage, or damage to the clock radio:
2EN
• Install all batteries correctly,
•
marked on the unit.
+ and - as
Remove batteries when the unit is not
•
used for a long time.
The battery shall not be exposed to
excessive heat such as sunshine, fire or
• This clock radio shall not be exposed to
the like.
•
dripping or splashing.
Do not place any sources of danger on the
clock radio (e.g. liquid filled objects,
•
candles).
lighted
Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
2 Your clock radio
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at /support.
Overview of the clock radio
a.
• Turn on or switch to standby.
• Store radio stations in memory.
• Select a preset FM station or DAB station.
• Set time.
• Tune to radio stations.
• Set hour and minute.
• Snooze alarm.
• Adjust display brightness.
• Display current status.
• Set alarm.
• Adjust volume.
b.
PRESET / SET TIME
Introduction
With this clock radio, you can
• listen to both FM and Digital Audio
Broadcasting (DAB+) radio;
• set two alarms to ring at different times.
c.
HR / MIN / TUN
d.
SNOOZE / BRIGHTNESS
What's in the box
Check and identify the contents of your package:
• Main unit
• AC power adaptor
• Quick start guide
• Safety and Warranty leaflet
e.
Display panel
f.
AL1 / AL2 / VOL
g.
MENU / INFO
• Enter the DAB+ menu.
• Display DAB/RDS station information.
• Scan/store radio stations automatcially.
• Confirm a selection.
• Set the sleep timer.
• Select FM or DAB+ mode.
h.
SCAN / SELECT
i.
SLEEP
Quick start guide
j.
FM / DAB
1
2
3
4
10
9
8
7
6
5
EN
3
3 Get started
Always follow the instructions in this chapter in
sequence.
Install batteries
The batteries can only back up clock and alarm
settings.
Caution
•
Risk of explosion! Keep the batteries away from heat,
•
Batteries contain chemical substances,
sunshine or fire. Never discard batteries in fire.
be disposed of properly.
so they should
Insert 2 AAA batteries (not provided) with
correct polarity (+/-) as illustrated.
Connect power
Caution
•
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
•
or underside of the clock radio..
Risk of electrical shock! When you unplug the power
adapter, always pull the plug from the socket.
•
pull the cord.
Never
Use only the AC power adapter specified in the
manufacturer or sold with this unit.
Note
•
The type plate is located at the bottom of the clock radio.
4EN
Set time
Note
•
You can only set time in standby mode.
1
In standby mode,
for more than 2 seconds.
press and hold SET TIME
2
Press
<
TUN to select <24 HR> or
to confirm.
12 HR> hour format, then press SET TIME
3
then press
Press HR to set hour and
SET TIME to confirm.
MIN to set minute,
4
Press
year [
TUN to set date,
confirm.
DD-MM-YY], then press
month and
SET TIME to
5
RADIO>
Press TUN to select SET TIME or < to confirm. NO UPDATE>, then press » [SAVED] is displayed and the time is set. Turn on Press » The unit switches to the last selected to turn on the clock radio. source. T » o switch to standby mode, The real-time clock is displayed. press again. 4 Listen to DAB+ radio Tune to DAB+ radio stations 1 Press to turn on the clock radio. 2 Press mode. DAB / FM repeatedly to select DAB » [DAB] will be displayed for more than 2 seconds and a DAB icon will be turned on. » The unit will tune to the last tuned station and display the station name. » For the first-time use, SCAN] will be displayed. [PRESS SELECT TO 3 Press SCAN / SELECT. » The unit stores all DAB+ radio stations automatically and broadcasts the first available station. » If no DAB+ station is found, [NO SIG] (no DAB+ signal) is displayed. To tune to a station from the available station list: » In DAB mode, press TUN repeatedly to navigate through the available DAB+ stations. Store DAB+ radio stations automatically In DAB mode, for more than 2 seconds. press and hold SCAN / SELECT » The unit scans all the available DAB+ radio stations and broadcasts the first available station. Tip • No DAB+ radio station is stored to presets during this • New stations and services will be added in the DAB+ process. broadcast. available, perform a full scan regularly. To make new DAB+ stations and services Store DAB+ radio stations manually Note • Y stations. ou can store a maximum of 20 preset DAB+ radio 1 Tune to a DAB+ radio station. 2 Press and hold seconds to acitvate programming mode. PRESET for more than 2 3 Press TUN repeatedly to select a number. 4 Press PRESET again to confirm. 5 Repeat steps 1 to 4 to store more DAB+ radio stations. Note • T station in its place. o remove a preset DAB+ radio station, store another Select a preset DAB+ radio station 1 In DAB mode, press PRESET. 2 Press radio station, TUN then press repeatedly to select a preset SELECT to confirm. Show DAB+ information While listening to DAB+ radio, repeatedly to scroll through the following press MENU / INFO information (if available): • Station name EN 5 • • Dynamic Label Segment (DLS) • Signal strength • Program type (PTY) • Ensemble Name • Channel and frequency • Signal error rate • Bit rate and audio status • Time Date Use DAB+ menu 1 In DAB mode, more than 2 seconds to access the DAB+ menu. press and hold MENU / INFO for 2 Press options: TUN to scroll through the menu • [ • stations. Scan]: scan all the available DAB+ radio [ frequency manually and add it to the Manual]: tune to a specific channel/ • station list. [ compensation for the differences in the DRC]: add or remove a degree of • dynamic range between radio stations. [Prune]: remove all the invalid stations 3 • from the station list. [System]: adjust system settings. To select an option, press SELECT. 4 Repeat steps 2-3 if any sub-option is available under an option. [System] • • [ [ Reset SW VER ]: reset all the settings to factory default. ] (software version): know the • software version of the unit. [ / Deutsch / Itliano / Français / Norsk / Language]: set system language (English Nederlands). Note • If no button is pressed within 15 seconds, will exit. the menu 6EN 5 Listen to FM radio Note • Keep the clock radio away from other electronic devices • For better reception, to avoid radio interference. of the FM antenna. fully extend and adjust the position Tune to FM radio stations 1 Press to turn on the clock radio. 2 Press radio. FM / DAB repeatedly to select FM 3 Press and hold seconds. TUN for more than 2 » The clock radio tunes to a station with strong reception automatically. 4 Repeat Step 3 to tune to more radio stations. To tune to a station manually: In FM tuner mode, to select a frequency. press TUN repeatedly Store FM radio stations automatically In FM tuner mode, more than 2 seconds. press and hold SCAN for » The unit stores all the available FM radio stations automatically and broadcasts the first station. Store FM radio stations manually Note • You can store a maximum of 20 FM radio stations. 1 Tune to an FM radio station. 2 Press and hold seconds to activate programming mode. PRESET for more than 2 3 Press TUN repeatedly to select a number. 4 Press PRESET again to confirm. 5 Repeat steps 1 to 4 to store more FM radio stations. Tip • T in its place. o remove a pre-stored station, store another station Select a preset radio station 1 In FM tuner mode, press PRESET. 2 Press radio station, TUN then press repeatedly to select a preset SELECT to confirm. Show RDS information RDS (Radio Data System) is a service that allows FM radio stations to show additional information. While listening, to scroll through the following information (if press MENU / INFO repeatedly available): • • Station frequency • Station name Program name Use FM menu 1 In FM tuner mode, INFO press and hold MENU / FM menu. for more than 2 seconds to access the 2 Press options: TUN to scroll through the menu • [ 3 • [ Scan System ]: scan settings. ]: adjust system settings. To select an option, press SELECT. 4 under an option. Repeat steps 2-3 if any sub-option is available [Scan] (scan setting) • [All] (all stations): scan all the available FM • radio stations. [ stations with strong signals only. Strong] (strong stations only): scan FM radio [System] • • [ [ Reset]: reset all the settings to factory default. • the unit. SW Version]: know the software version of [ / Deutsch / Itliano / Français / Norsk / Language]: set system language (English Nederlands). EN 7 6 Other features Set alarm time Set alarm Note • • Y Make sure that you have set the clock correctly. ou can only set the alarm in standby mode. 1 In standby mode, for more than 2 seconds to set alarm time. press and hold AL1 or AL2 2 then press Press HR to set hour and AL1 or AL2 to confirm. MIN to set minute, 3 Press weekdays, TUN AL2 to confirm. or weekends), to set alarm type (daily, then press AL1 once, or 4 Press DAB, confirm. or buzzer), TUN to set an alarm source (FM, then press AL1 or AL2 to 5 press Press AL1 TUN or AL2 to set the volume level, to confirm. then Tip • The unit exits alarm setting mode when being idle for 15 seconds. Activate/deactivate alarm timer Press deactivate the alarm timer. AL1 or AL2 repeatedly to activate or » If the alarm timer is activated, the alarm indicator turns on. » If the alarm timer is deactivated, the alarm indicator turns off. » The alarm repeats ringing for the next day. » T AL1 o stop the alarm, or AL2. press the coresponding 8EN Snooze the alarm When the alarm sounds, » The alarm snoozes and repeats ringing 9 press SNOOZE. minutes later. Set sleep timer This clock radio can switch to standby mode automatically after a preset period. • Press (in minutes). SLEEP repeatedly to select a period » The clock radio switches to standby mode automatically after the preset period. T • o deactivate the sleep timer: Press appears. SLEEP repeatedly until [OFF] (off) Adjust volume While listening, press VOL to adjust volume. Adjust display brightness Press display brightness. BRIGHTNESS repeatedly to adjust the • • HIGH • MED (High) LOW (Medium) (Low) 7 Product information Note • Product information is subject to change without prior notice. Amplifier Rated Output Power1W RMS Tuner Tuning RangeFM: DAB: 87.5-108 MHz 239.20MHz 174.92- Tuning Grid50 KHz Sensitivity - Mono, Ratio 26 dB S/N <22 dBf T Distortion otal Harmonic <3% Signal to Noise Ratio >50 dBA General information Brand: Model: Philips; AC Power (power adaptor) Input: AS030-050-EE060 50/60 Hz; 100-240V~ Output: 5V 0.15A 0.6A Operation P Consumption ower <3W Standby Power Consumption <1W Dimensions (W x H x D) 131 x 54 x 131 mm Weight (Main unit) 267.3g 8 Troubleshooting Warning • Never remove the casing of the product T the device yourself. o keep the warranty valid, never try to repair If you encounter problems when using this device, requesting service. check the following points before unsolved, com/support). go to the Philips webpage (s. If the problem remains sure that the device is nearby and the model When you contact Philips, make number and serial number are available. No power • Make sure that the AC power plug of the • unit is connected properly. Make sure that there is power at the AC outlet. No sound • Adjust the volume. No response from the unit • Disconnect and reconnect the AC power plug, then turn on the unit again. Poor radio reception • Keep the clock radio away from other electronic devices to avoid radio • interference. Fully extend and adjust the position of the antenna. Alarm does not work • Set the clock/alarm correctly. Clock/alarm setting erased • Power has been interrupted or the power • plug has been disconnected. Reset the clock/alarm. EN 9 9 Notice Any changes or modifications made to this device that are not expressly approved by MMD Hong Kong Holding Limited may void the user’s authority to operate the product. Hereby, TP Vision Europe B.V. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www. /support. never dispose of the product and batteries with normal household waste. Correct disposal of old products and batteries helps prevent negative consequences for the environment and human health. Removing the disposal batteries To remove the disposable batteries, see battery install section. This product complies with the radio interference requirements of the European Community. This product is designed and manufactured with high-quality materials and components, which can be recycled and reused. This symbol means the product must not be discarded as household waste and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health. This symbol means that the product contains batteries covered by European Directive 2013/56/EU which cannot be disposed of with normal household waste. Inform yourself about the the local separate collection system for electrical and electronic products and batteries. Follow local rules and 10EN Specifications are subject to change without notice. 2020 © Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V manufactured by and is sold under the responsibility of MMD Hong Kong . and are used under license. This product has been Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product. TAR3505_12_UM_V1.0
2024年11月1日发(作者：告力)
Clock Radio
3000
Series
R3505
User manual
Register your product and get support at
/support
Contents
1 Important
2
7 Product information
Safety 2
8 Troubleshooting
2
Introduction 3
Your clock radio
3
What's in the box
9 Notice
Overview of the clock radio
3
3
3 Get started
Install batteries
4
Connect power
4
Set time
4
Turn on
4
4
4 Listen to DAB+ radio
Tune to DAB+ radio stations
5
Store DAB+ radio stations automatically
5
Store DAB+ radio stations manually
5
Select a preset DAB+ radio station
5
Show DAB+ information
5
Use DAB+ menu
5
6
5 Listen to FM radio
Tune to FM radio stations
6
Store FM radio stations automatically
6
Store FM radio stations manually
6
Select a preset radio station
6
Show RDS information
7
Use FM menu
7
7
6 Other features
Set alarm time
8
Set sleep timer
8
Adjust volume
8
Adjust display brightness
8
8
9
9
10
EN
1
1 Important
Safety
Warning
•
•
Never remove the casing of this clock radio.
•
Never lubricate any part of this clock radio.
Never place this clock radio on other
•
electrical equipment.
Keep this clock radio away from direct
•
sunlight,
Make sure that you always have easy access
naked flames or heat.
to the power cord,
disconnect the clock radio from the power.
plug or adaptor to
•
•
Read these instructions.
•
Heed all warnings.
•
Follow all instructions.
Do not block any ventilation openings. Install in
•
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as
radiators, heat registers, stoves,
•
(including amplifiers) that produce heat.
or other apparatus
Protect the power cord from being walked on
or pinched,
receptacles,
particularly at plugs, convenience
•
from the clock radio.
and the point where they exit
Only use attachments/accessories specified by
•
the manufacturer.
Unplug this apparatus during lightning storms
•
or when unused for long periods of time.
Refer all servicing to qualified service
personnel.
apparatus has been damaged in any way,
Servicing is required when the
as power-supply cord or plug is damaged,
such
liquid has been spilled or objects have fallen
into the apparatus,
exposed to rain or moisture,
the apparatus has been
•
normally,
Battery usage CAUTION -
or has been dropped.
does not operate
leakage which may result in bodily injury,
To prevent battery
property damage, or damage to the clock radio:
2EN
• Install all batteries correctly,
•
marked on the unit.
+ and - as
Remove batteries when the unit is not
•
used for a long time.
The battery shall not be exposed to
excessive heat such as sunshine, fire or
• This clock radio shall not be exposed to
the like.
•
dripping or splashing.
Do not place any sources of danger on the
clock radio (e.g. liquid filled objects,
•
candles).
lighted
Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
2 Your clock radio
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at /support.
Overview of the clock radio
a.
• Turn on or switch to standby.
• Store radio stations in memory.
• Select a preset FM station or DAB station.
• Set time.
• Tune to radio stations.
• Set hour and minute.
• Snooze alarm.
• Adjust display brightness.
• Display current status.
• Set alarm.
• Adjust volume.
b.
PRESET / SET TIME
Introduction
With this clock radio, you can
• listen to both FM and Digital Audio
Broadcasting (DAB+) radio;
• set two alarms to ring at different times.
c.
HR / MIN / TUN
d.
SNOOZE / BRIGHTNESS
What's in the box
Check and identify the contents of your package:
• Main unit
• AC power adaptor
• Quick start guide
• Safety and Warranty leaflet
e.
Display panel
f.
AL1 / AL2 / VOL
g.
MENU / INFO
• Enter the DAB+ menu.
• Display DAB/RDS station information.
• Scan/store radio stations automatcially.
• Confirm a selection.
• Set the sleep timer.
• Select FM or DAB+ mode.
h.
SCAN / SELECT
i.
SLEEP
Quick start guide
j.
FM / DAB
1
2
3
4
10
9
8
7
6
5
EN
3
3 Get started
Always follow the instructions in this chapter in
sequence.
Install batteries
The batteries can only back up clock and alarm
settings.
Caution
•
Risk of explosion! Keep the batteries away from heat,
•
Batteries contain chemical substances,
sunshine or fire. Never discard batteries in fire.
be disposed of properly.
so they should
Insert 2 AAA batteries (not provided) with
correct polarity (+/-) as illustrated.
Connect power
Caution
•
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
•
or underside of the clock radio..
Risk of electrical shock! When you unplug the power
adapter, always pull the plug from the socket.
•
pull the cord.
Never
Use only the AC power adapter specified in the
manufacturer or sold with this unit.
Note
•
The type plate is located at the bottom of the clock radio.
4EN
Set time
Note
•
You can only set time in standby mode.
1
In standby mode,
for more than 2 seconds.
press and hold SET TIME
2
Press
<
TUN to select <24 HR> or
to confirm.
12 HR> hour format, then press SET TIME
3
then press
Press HR to set hour and
SET TIME to confirm.
MIN to set minute,
4
Press
year [
TUN to set date,
confirm.
DD-MM-YY], then press
month and
SET TIME to
5
RADIO>
Press TUN to select SET TIME or < to confirm. NO UPDATE>, then press » [SAVED] is displayed and the time is set. Turn on Press » The unit switches to the last selected to turn on the clock radio. source. T » o switch to standby mode, The real-time clock is displayed. press again. 4 Listen to DAB+ radio Tune to DAB+ radio stations 1 Press to turn on the clock radio. 2 Press mode. DAB / FM repeatedly to select DAB » [DAB] will be displayed for more than 2 seconds and a DAB icon will be turned on. » The unit will tune to the last tuned station and display the station name. » For the first-time use, SCAN] will be displayed. [PRESS SELECT TO 3 Press SCAN / SELECT. » The unit stores all DAB+ radio stations automatically and broadcasts the first available station. » If no DAB+ station is found, [NO SIG] (no DAB+ signal) is displayed. To tune to a station from the available station list: » In DAB mode, press TUN repeatedly to navigate through the available DAB+ stations. Store DAB+ radio stations automatically In DAB mode, for more than 2 seconds. press and hold SCAN / SELECT » The unit scans all the available DAB+ radio stations and broadcasts the first available station. Tip • No DAB+ radio station is stored to presets during this • New stations and services will be added in the DAB+ process. broadcast. available, perform a full scan regularly. To make new DAB+ stations and services Store DAB+ radio stations manually Note • Y stations. ou can store a maximum of 20 preset DAB+ radio 1 Tune to a DAB+ radio station. 2 Press and hold seconds to acitvate programming mode. PRESET for more than 2 3 Press TUN repeatedly to select a number. 4 Press PRESET again to confirm. 5 Repeat steps 1 to 4 to store more DAB+ radio stations. Note • T station in its place. o remove a preset DAB+ radio station, store another Select a preset DAB+ radio station 1 In DAB mode, press PRESET. 2 Press radio station, TUN then press repeatedly to select a preset SELECT to confirm. Show DAB+ information While listening to DAB+ radio, repeatedly to scroll through the following press MENU / INFO information (if available): • Station name EN 5 • • Dynamic Label Segment (DLS) • Signal strength • Program type (PTY) • Ensemble Name • Channel and frequency • Signal error rate • Bit rate and audio status • Time Date Use DAB+ menu 1 In DAB mode, more than 2 seconds to access the DAB+ menu. press and hold MENU / INFO for 2 Press options: TUN to scroll through the menu • [ • stations. Scan]: scan all the available DAB+ radio [ frequency manually and add it to the Manual]: tune to a specific channel/ • station list. [ compensation for the differences in the DRC]: add or remove a degree of • dynamic range between radio stations. [Prune]: remove all the invalid stations 3 • from the station list. [System]: adjust system settings. To select an option, press SELECT. 4 Repeat steps 2-3 if any sub-option is available under an option. [System] • • [ [ Reset SW VER ]: reset all the settings to factory default. ] (software version): know the • software version of the unit. [ / Deutsch / Itliano / Français / Norsk / Language]: set system language (English Nederlands). Note • If no button is pressed within 15 seconds, will exit. the menu 6EN 5 Listen to FM radio Note • Keep the clock radio away from other electronic devices • For better reception, to avoid radio interference. of the FM antenna. fully extend and adjust the position Tune to FM radio stations 1 Press to turn on the clock radio. 2 Press radio. FM / DAB repeatedly to select FM 3 Press and hold seconds. TUN for more than 2 » The clock radio tunes to a station with strong reception automatically. 4 Repeat Step 3 to tune to more radio stations. To tune to a station manually: In FM tuner mode, to select a frequency. press TUN repeatedly Store FM radio stations automatically In FM tuner mode, more than 2 seconds. press and hold SCAN for » The unit stores all the available FM radio stations automatically and broadcasts the first station. Store FM radio stations manually Note • You can store a maximum of 20 FM radio stations. 1 Tune to an FM radio station. 2 Press and hold seconds to activate programming mode. PRESET for more than 2 3 Press TUN repeatedly to select a number. 4 Press PRESET again to confirm. 5 Repeat steps 1 to 4 to store more FM radio stations. Tip • T in its place. o remove a pre-stored station, store another station Select a preset radio station 1 In FM tuner mode, press PRESET. 2 Press radio station, TUN then press repeatedly to select a preset SELECT to confirm. Show RDS information RDS (Radio Data System) is a service that allows FM radio stations to show additional information. While listening, to scroll through the following information (if press MENU / INFO repeatedly available): • • Station frequency • Station name Program name Use FM menu 1 In FM tuner mode, INFO press and hold MENU / FM menu. for more than 2 seconds to access the 2 Press options: TUN to scroll through the menu • [ 3 • [ Scan System ]: scan settings. ]: adjust system settings. To select an option, press SELECT. 4 under an option. Repeat steps 2-3 if any sub-option is available [Scan] (scan setting) • [All] (all stations): scan all the available FM • radio stations. [ stations with strong signals only. Strong] (strong stations only): scan FM radio [System] • • [ [ Reset]: reset all the settings to factory default. • the unit. SW Version]: know the software version of [ / Deutsch / Itliano / Français / Norsk / Language]: set system language (English Nederlands). EN 7 6 Other features Set alarm time Set alarm Note • • Y Make sure that you have set the clock correctly. ou can only set the alarm in standby mode. 1 In standby mode, for more than 2 seconds to set alarm time. press and hold AL1 or AL2 2 then press Press HR to set hour and AL1 or AL2 to confirm. MIN to set minute, 3 Press weekdays, TUN AL2 to confirm. or weekends), to set alarm type (daily, then press AL1 once, or 4 Press DAB, confirm. or buzzer), TUN to set an alarm source (FM, then press AL1 or AL2 to 5 press Press AL1 TUN or AL2 to set the volume level, to confirm. then Tip • The unit exits alarm setting mode when being idle for 15 seconds. Activate/deactivate alarm timer Press deactivate the alarm timer. AL1 or AL2 repeatedly to activate or » If the alarm timer is activated, the alarm indicator turns on. » If the alarm timer is deactivated, the alarm indicator turns off. » The alarm repeats ringing for the next day. » T AL1 o stop the alarm, or AL2. press the coresponding 8EN Snooze the alarm When the alarm sounds, » The alarm snoozes and repeats ringing 9 press SNOOZE. minutes later. Set sleep timer This clock radio can switch to standby mode automatically after a preset period. • Press (in minutes). SLEEP repeatedly to select a period » The clock radio switches to standby mode automatically after the preset period. T • o deactivate the sleep timer: Press appears. SLEEP repeatedly until [OFF] (off) Adjust volume While listening, press VOL to adjust volume. Adjust display brightness Press display brightness. BRIGHTNESS repeatedly to adjust the • • HIGH • MED (High) LOW (Medium) (Low) 7 Product information Note • Product information is subject to change without prior notice. Amplifier Rated Output Power1W RMS Tuner Tuning RangeFM: DAB: 87.5-108 MHz 239.20MHz 174.92- Tuning Grid50 KHz Sensitivity - Mono, Ratio 26 dB S/N <22 dBf T Distortion otal Harmonic <3% Signal to Noise Ratio >50 dBA General information Brand: Model: Philips; AC Power (power adaptor) Input: AS030-050-EE060 50/60 Hz; 100-240V~ Output: 5V 0.15A 0.6A Operation P Consumption ower <3W Standby Power Consumption <1W Dimensions (W x H x D) 131 x 54 x 131 mm Weight (Main unit) 267.3g 8 Troubleshooting Warning • Never remove the casing of the product T the device yourself. o keep the warranty valid, never try to repair If you encounter problems when using this device, requesting service. check the following points before unsolved, com/support). go to the Philips webpage (s. If the problem remains sure that the device is nearby and the model When you contact Philips, make number and serial number are available. No power • Make sure that the AC power plug of the • unit is connected properly. Make sure that there is power at the AC outlet. No sound • Adjust the volume. No response from the unit • Disconnect and reconnect the AC power plug, then turn on the unit again. Poor radio reception • Keep the clock radio away from other electronic devices to avoid radio • interference. Fully extend and adjust the position of the antenna. Alarm does not work • Set the clock/alarm correctly. Clock/alarm setting erased • Power has been interrupted or the power • plug has been disconnected. Reset the clock/alarm. EN 9 9 Notice Any changes or modifications made to this device that are not expressly approved by MMD Hong Kong Holding Limited may void the user’s authority to operate the product. Hereby, TP Vision Europe B.V. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www. /support. never dispose of the product and batteries with normal household waste. Correct disposal of old products and batteries helps prevent negative consequences for the environment and human health. Removing the disposal batteries To remove the disposable batteries, see battery install section. This product complies with the radio interference requirements of the European Community. This product is designed and manufactured with high-quality materials and components, which can be recycled and reused. This symbol means the product must not be discarded as household waste and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health. This symbol means that the product contains batteries covered by European Directive 2013/56/EU which cannot be disposed of with normal household waste. Inform yourself about the the local separate collection system for electrical and electronic products and batteries. Follow local rules and 10EN Specifications are subject to change without notice. 2020 © Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V manufactured by and is sold under the responsibility of MMD Hong Kong . and are used under license. This product has been Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product. TAR3505_12_UM_V1.0