LG 新型洗盘风干净器用户手册说明书-USB迷|专注于互联网分享

2024年10月5日发(作者：齐衍)

OWNER’S MANUAL

NEW TYPE CYCLONE

VACUUM CLEANER

This information contains important instructions for the safe use and

maintenance of the vacuum cleaner. Especially, please read all of the

information on page 3, 4, 5 for your safety. Please keep this manual in

an easily accessible place and refer to it anytime.

VB-20700HRF

VB-20700HTS

Table of contents

Important safety instructions ..........................................................................3~5

How to use .......................................................................................................... 6

Assembling vacuum cleaner ...................................................................................... 6~7

Operating vacuum cleaner ............................................................................................. 8

Using carpet and floor nozzle / Suction Hole for device protection ............................... 9

Using the accessory nozzles ........................................................................................ 10

Emptying dust tank ...................................................................................................... 11

Cleaning dust tank ....................................................................................................... 12

Cleaning air filter and motor safety filter ...................................................................... 13

How to assemble dust separator ................................................................................. 14

Cleaning exhaust filter ................................................................................................. 15

What to do if your vacuum cleaner does not work ....................................... 16

What to do when suction performance decreases ........................................ 16

Read and follow all instructions before using your vacuum cleaner to prevent the risk of fire, electric shock, personal injury, or

damage when using the vacuum cleaner. This guide do not cover all possible conditions that may occur. Always contact your

service agent or manufacturer about problems that you do not understand. This appliance complies with the following EC

Directives :-2006/95/EC Low Voltage Directive -2004/108/EC EMC Directive.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “WARNING” or “CAUTION.”

These words mean:

This symbol will alert you to hazards or unsafe practices which could cause serious

bodily harm or death.

This symbol will alert you to hazards or unsafe practices which could

cause bodily injury or property damage.

1. This appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible

for their safety.

2. Children should be supervised to ensure that they do not

play with the appliance.

3. If the supply cord is damaged, it must be replaced by LG

Electronics Service Agent in order to avoid a hazard

WARNING

4. This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

use of the appliance in a safe way and understand

the hazards involved. Children shall not play with the

appliance. Cleaning and user maintenance shall not be

made by children without supervision.

WARNING

• Do not plug in if control knob is not in OFF position.

Personal injury or product damage could result.

• Keep children away and beware of obstructions

when rewinding the cord to prevent personal injury

The cord moves rapidly when rewinding.

• Disconnect electrical supply before servicing or

cleaning the unit or when cleaner is not in use.

Failure to do so could result in electrical shock or

personal injury.

• Do not use the vacuum cleaner if the power cord or

plug is damaged or faulty.

Personal injury or product damage could result. In these

cases, contact LG Electronics Service Agent to avoid

hazard.

• Do not use vacuum cleaner if it has been under water.

Personal injury or product damage could result. In these

cases, contact LG Electronics Service Agent to avoid

hazard.

• Do not continue to vacuum if any parts appear

missing or damaged.

Personal injury or product damage could result. In these

cases, contact LG Electronics Service Agent to avoid

hazard.

• Do not use an extension cord with this vacuum

cleaner.

Fire hazard or product damage could result.

• Do not use vacuum cleaner to pick up anything that

is burning or smoking such as cigarettes, or hot

ashes.

Doing so could result in death, fire or electrical shock.

• Do not vacuum flammable or explosive substances

such as gasoline, benzene, thinners, propane

(liquids or gases).

The fumes from these substances can create a fire

hazard or explosion. Doing so could result in death or

personal injury.

• Do not handle plug or vacuum cleaner with wet

hands.

Doing so could result in death or electrical shock.

• Using proper voltage.

Using improper voltage may result in damage to the

motor and possible injury to the user. Proper voltage is

listed on the bottom of vacuum cleaner.

• Turn off all controls before unplugging.

Failure to do so could result in electrical shock or

personal injury.

• Do not unplug by pulling on cord.

Doing so could result in product damage or electrical

shock. To unplug, grasp the plug, not the cord.

• Keep hair, loose clothing, fingers, and all parts of

the body away from openings and moving parts.

Failure to do so could result in electrical shock or

personal injury.

• Do not pull or carry by cord, use cord as a handle,

close a door on cord, or pull cord around sharp

edges or corners. Do not run vacuum cleaner over

cord. Keep cord away from heated surfaces.

Failure to do so could result in electrical shock or

personal injury or fire or product damage.

• Do not change the plug in any way.

Failure to do so could result in electrical shock or

personal injury or product damage. Doing so result in

death. If plug does not fit, contact a qualified electrician to

install the proper outlet.

If the supply cord is damaged, it must be replaced by

the manufacturer, its service agent or similarly qualified

persons in order to avoid a hazard.

• Repairs to electrical appliances may only be

performed by qualified service engineers.

Improper repairs may lead to serious hazards for the user.

• Do not put fingers near the gear.

Failure to do so could result in personal injury.

gear

• The hose contains electrical wires. Do not use it if it

is damaged, cut punctured.

Failure to do so could result in death, or electrical shock.

• Do not allow to be used as toy. Close attention is

necessary when used by or near children.

Personal injury or product damage could result.

CAUTION

• Do not put any objects into openings.

Failure to do so could result in product damage.

• Do not use with any opening blocked: keep free of

dust, lint, hair, and anything that may reduce air flow.

Failure to do so could result in product damage.

• Use accessory nozzles in sofa mode.

Failure to do so could result in product damage.

You should grasp the carrier handle when you are

moving the vacuum cleaner. (Page 11)

• Do not use vacuum cleaner without the dust tank and/

or filters in place.

Failure to do so could result in product damage.

• Make sure the filters (exhaust filter and air filter) are

completely dry before replacing in the machine.

Failure to do so could result in product damage.

• Do not dry the filter in an oven or microwave.

Failure to do so could result in fire hazard.

• Do not dry the filter in a clothes dryer.

Failure to do so could result in fire hazard.

• Do not dry near an open flame.

Failure to do so could result in fire hazard.

• Do not use filters that is not dried.

• If the power cord is damaged, it must be replaced by

an approved LG Electronics Service Agent to avoid a

hazard.

• Always clean the dust bin after vacuuming carpet

cleaners or fresheners, powders and fine dust.

These products clog the filters, reduce airflow and can

cause damage to the cleaner. Failure to clean the dust bin

could cause permanent damage to the cleaner.

• Do not use vacuum cleaner to pick up sharp hard

objects, small toys, pins, paper clips, etc.

They may damage the cleaner or dust bin.

• Store the vacuum cleaner indoors.

Put the vacuum cleaner away after use to prevent tripping

over it.

• The vacuum cleaner is not intended to use by young

children or infirm people without supervision.

Failure to do so could result in personal injury or product

damage.

• Only use parts produced or recommended by LG

Electronics Service Agents.

Failure to do so could result in product damage.

• This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a

person responsible for their safety.

Children should be supervised to ensure that they do not

play with the appliance.

• Use only as described in this manual. Use only with

LG recommended or approved attachments and

accessories.

Failure to do so could result in personal injury or product

damage.

• To avoid personal injury and to prevent the machine

from falling when cleaning stairs, always place it at

the bottom of stairs.

Failure to do so could result in personal injury or product

damage.

Thermal protector :

This vacuum cleaner has a special thermostat that protects the vacuum cleaner in case of motor

overheating. If the vacuum cleaner suddenly shuts off, turn off the switch and unplug the vacuum cleaner.

Check the vacuum cleaner for possible source of overheating such as a full dust tank, a blocked hose or

clogged filter. If these conditions are found, fix them and wait at least 30 minutes before attempting to use

the vacuum cleaner. After the 30 minute period, plug the vacuum cleaner back in and turn on the switch.

If the vacuum cleaner still does not run, contact a qualified electrician.

How to use

Assembling vacuum cleaner

Hose Handle

Spring latch

Telescopic pipe

➊

arpet and floor nozzleC

Push the nozzle into the telescopic pipe.

➋

Telescopic pipe

• Push telescopic pipe firmly into hose handle.

• Grasp the spring latch to expand.

• Pull out the pipe to desired length.

Fitting pipe

Flexible Hose

Button

Attachment Point

➌

onnecting the hose to the vacuum cleaner C

Push the fitting pipe on the flexible hose

into the attachment point on the vacuum cleaner.

To remove the flexible hose from the vacuum

cleaner,press the button situated on the fitting pipe,

then pull the fitting pipe out of the vacuum cleaner.

How to use

Operating vacuum cleaner

Plug

Cord reel button

Control knob

MAX line

➊

ow to operateH

• Pull out the power cord to

the desired length and plug

into the socket.

• Slide the control knob of

the hose handle to operate

vacuum cleaner.

• To turn off, slide the control

knob to off position.

• Press the cord reel button

to rewind the power cord

after use.

➋

Emptying the dust tank

➌

Park mode

• Always empty the dust tank

when the dust tank level

reaches the MAX line.

• To store during

vacuuming, for example

to move a small piece

of furniture or a rug, use

park mode to support the

flexible hose and nozzle.

- Slide the hook on the

nozzle into the slot on

the side of vacuum

cleaner.

➍

Storage

• When you have switched

off and unplugged the

vacuum cleaner, press

the cord reel button to

automatically rewind the

cord.

• You can store your

vacuum cleaner in a

vertical position by

sliding the hook on the

nozzle into the slot on

the underside of the

vacuum cleaner.

How to use

Using carpet and floor nozzle / Suction Hole for device protection

Carpet

Pedal

Floor

Suction Hole for Device

Protection

Extension Pipe for

Lenght Adjustment

➊ Carpet and floor nozzle

• Two position nozzle

This is equipped with a pedal which allows you to

alter its position according to the type of floor to

be cleaned.

• Carpet or rug position

) to lower brush. press the pedal (

• Hard floor position (tiles, parquets floor)

Press the pedal ( ) to lift the brush up.

➋ Suction hole for device protection

• You can perform cleaning at any place like

corner or crevice since revolution of the

suction hole is free.

• Cleaning carpet and floor nozzle

• Clean the hole

and brush of

nozzle.

How to use

Using the accessory nozzles

Upholstery nozzle

Dusting brush

Crevice tool

➌

Upholstery nozzle

Upholstery nozzle is for vacuuming

upholstery, mattresses, etc.

➍

Dusting brush

Dusting brush is for vacuuming picture

frames, furniture frames, books and

other irregular surfaces.

➎

revice tool C

Crevice tool is for vacuuming in

those normally hard-to-reach

places such as reaching cobwebs

or between the cushions of a sofa.

Push the button

Pull the cover

NOTICE

Use accessory in the sofa mode

NOTICE

• BOX •

Be cautious to use the product on TV, LCD, Monitor or furniture,

it can cause small scratch.

• Accessory nozzles include in the "PE BAG" with

owner's manual.

How to use

Emptying dust tank

For maximum performance, always empty the dust tank when the dust tank level reaches the MAX line.

Tank separation lever

Pull out

Tank handle

MAX line

Dust tank cap

The dust tank needs emptying when the dust tank level

reaches the MAX line.

• Turn off the vacuum cleaner and unplug it.

• Grasp the handle of the tank and then press the tank

separation lever.

• Pull out the dust tank.

• Empty the tank and then assemble the dust tank as below.

Moving the vacuum cleaner

• Don't grasp the tank handle when you are moving the

vacuum cleaner.

The vacuum cleaner's body may fall when separating tank

and body.

You should grasp the carrier handle when you are moving

the vacuum cleaner.

Assembling dust tank

Tank handle

Carrier handle

How to use

Cleaning dust tank

Tank separation lever

Pull out

Tank handle

• Press tank separation button and pull out dust tank.

• Raise dust tank cap

• Dry fully in shade so that moisture is entirely removed.

NOTICE

If suction power decreases, clean air filter and motor

safety filter.



How to use

Cleaning air filter and motor safety filter

Dust separator

Guide cover

Air filter

Pre-filter cover

Motor safety filter

• Push the vacuum cover button, open the body cover.

• Hold dust separator handle and pull it upward.

• Open the guide cover by pulling the guide cover lever and remove the dust.

• Open prefilter cover.

• Pull out the air filter.

• Clean air filter and motor safety filter with running water.

• Do not wash filters with hot water.

• Eliminate water thoroughly

• Dry it under well-ventilated shade for a day.

• The air filter and the motor safety filter should be cleaned as above the figure.

NOTICE

If filters are damaged, do not use them.

In this cases, contact LG Electronics Service

Agent.

Wash filters at least Once a month.

How to use

How to assemble dust separator

Assembling will be conducted in opposite order of separation.

CAUTION

Use the vacuum after assembling the dust separator fully.

Click

• Insert the air filter.

• Close the filter cover.

• Close the dust separator cover.

• Hold the dust separator handle and put it

down to connect it clearly.

• Close the vacuum cover.

• If there is no dust separator or dust

separator is not installed clearly, cover

will not be closed.

• If it is not installed clearly, pull the dust

separator out and re-assemble it.

• Do not operate the vacuum cleaner

when the body cover is not close.

• It can be the cause of malfunction

CAUTION

How to use

Cleaning exhaust filter

Exhaust filter cover

Button

Exhaust filter

Lever

Exhaust filter cover

Click

• The exhaust filter is reusable.

• To clean the exhaust filter, remove the exhaust filter cover on the body by

pulling it out.

• Separate the exhaust filter.

• Dust off filter.(Do not wash filter with water.)

• The exhaust filter should be cleaned at least a year.

Exhaust filter cover assembling

• Fit exhaust filter cover lugs to the grooves of vacuum cleaner body.

• Join it the body.

What to do if your vacuum cleaner does not work

Check that the vacuum cleaner is plugged in correctly and that the electrical socket is working.

hat to do when suction performance decreasesW

• Turn off the vacuum cleaner and unplug it.

• Check the telescopic pipe, flexible hose and cleaning tool for blockages or obstructions.

• Check that the dust tank is not full. Empty if necessary.

• Check that dust separator is not clogged with obstruction. Eliminate it.

• Check that the exhaust filter is not clogged. Clean the exhaust filter if necessary.

• Check that the air filter of dust separator is not clogged. Clean the air filter if necessary.