2024年9月14日发(作者：谷梁飞光)
USER GUIDE
For more information visit
Table of Contents
Section 1 : General Information
Introduction 3
General Use Warnings 3
Safety Warnings 3
System Requirements 4
In the Box 4
TS3 Plus Diagram 5
Section 2 : Using the TS3 Plus
Powering the TS3 Plus 7
Connecting the TS3 Plus 8
Using the TS3 Plus Utility 9
LED Indicator
Interfaces Summary 10
Thunderbolt™ 3
USB 3.2 Type-A
DisplayPort 1.2 11
Ethernet
Audio 13
TS3 Plus Accessories 15
Technical Specifications 14
Section 3 : Technical Support and
Warranty Information
Technical Support 16
Warranty
2
8
1
1
0
0
6
13
1
1. General Information
Introduction
The CalDigit Thunderbolt™ Station 3 Plus maximizes the potential of Thunderbolt™ 3’s 40G/s
throughout to add a plethora of devices to any Mac or PC Thunderbolt™ 3 enabled computer.
Featuring dual Thunderbolt™ 3 Type-C ports for daisy-chaining extra Thunderbolt™ 3 devices, the
TS3 Plus can fit into any workflow without sacrificing a Thunderbolt™ 3 port all while charging your
computer up to 87W.
General Use Warnings
•
Please read the TS3 Plus manual thoroughly and familiarize yourself with the product
before use.
•
Avoid using the TS3 Plus in extremely hot and cold environments. A safe temperature
range is between 40°F – 95°F (4.4°C - 35°C).
•
Avoid using the TS3 Plus in humid environments. Moisture and condensation can
accumulate in the device and cause damage to the electrical components.
•Only use the power adapter that has been supplied with the TS3 Plus. An excessive or
inadequate power supply can result in unstable performance or device failure.
Safety Warnings
•
Keep the TS3 Plus away from liquids and moisture. Exposure to liquids can result in
damaging the unit, electric shock, and result in a fire hazard.
•
If your TS3 Plus gets wet while it is still off, do not turn it on. In the case of any issue with the
device, do not attempt to repair or open the device yourself. Doing so can result in personal
injury, damage the device, and will void the warranty. If you have any issues, please contact
CalDigit Technical Support.
3
System Requirements
Thunderbolt™ 3 computers
macOS 10.12 Sierra or later
Windows 7, 8, 10 or later
In the Box
A • 1 x CalDigit TS3 Plus
B
• 1 x Power Supply
C • 1 x Power Cord
(plug style may vary based on regional regulations and requirements.)
D • 1 x Thunderbolt™ 3 Cable (Optional)
E • 2 x Rubber Feet Strips
A
C
B
D
E
4
TS3 Plus Diagram
USB 3.2 Type-A
SD Card Reader
USB 3.2 Type-C
Digital Optical
Audio In/Out
USB 3.2 Type-C
Gigabit Ethernet
DC In
USB 3.2 Type-A
5
USB 3.2USB 3.2
USB 3.2USB 3.2
6
2. Using the TS3 Plus
Powering the TS3 Plus
CalDigit TS3 Plus requires power from the AC adapter to operate. Connect the AC adapter
connector to the DC jack on the back of the TS3 Plus and the other side to an AC outlet.
power off the TS3 Plus, disconnect the power cable from the AC outlet.
7
NOTE
Always use the supplied Thunderbolt™ 3 cable or a certified 40Gb/s
Thunderbolt™ 3 cable.
Connecting the TS3 Plus to your computer
Once the TS3 Plus has been powered on, connect the device using a Thunderbolt™ 3 cable from
one of the Thunderbolt™ 3 port labeled “Computer” on the TS3 Plus to a Thunderbolt™ 3 port on
your computer. This single connection will now provide 87W charging for your laptop in addition
to expanding your connectivity options.
LED Indicator
The TS3 Plus is equipped with an LED indicator, which will display a BLUE light if the unit is powered
on and connected to your computer.
ONOFF
8
CalDigit Docking Station Utility
The CalDigit Docking Station Utility makes it incredibly easy to disconnect all your USB storage
devices from the TS3 Plus without the need to manually disconnect them one by one.
NOTE
The CalDigit Docking Station Utility Installer file needs to be downloaded and
installed on your Mac from the CalDigit website. Please go to it.
com/ to download the Installer package.
Disconnecting all USB storage devices
1. Open the CalDigit Docking Station Utility on the top menu bar.
2. Click the eject button on the TS3 Plus image.
Disconnecting individual USB storage devices
1. Open the CalDigit Docking Station Utility on the top menu bar.
2. Click on the specific USB device you would like to eject. Only that device will be ejected.
9
Interface Summary
Thunderbolt™ 3
The TS3 Plus features two Thunderbolt™ 3
Type-C ports that can transfer at speeds up to
40Gb/s. One port is reserved for the connection
to your host computer and the second can be
used to connect extra Thunderbolt™ 3 devices.
Thunderbolt™ 3 Type-C supports video and
data. The Thunderbolt™ host port also provides
charging up to 87W for your computer.
USB 3.2 Type-C
The TS3 Plus features two USB 3.2 Type-C ports (1 x 5Gb/s, 1 x 10Gb/s). These ports only support
data and 1500mA of power for charging. Video capabilities are not supported.
Front (x1)
USB 3.2 Type-A
Rear(x1)
The TS3 Plus features a total of five USB 3.2 Type-A ports (5 x 5Gb/s)
Front (x1)Rear(x4)
UHS-II SD Card Slot
The front-facing UHS-I SD (4.0) Card slot is
capable of transfer speeds up to 312MB/s.
This slot is also backwards compatible with
SDXC, SDHC, and standard SD cards.
Optical Audio (S/PDIF)
The TS3 Plus features one optical audio port
that can be used to connect a compatible AV
receiver using TOSLINK cables..
10
DisplayPort
The TS3 Plus features a full-size DisplayPort that supports a maximum resolution up to
4K. DisplayPort can be easily converted to HDMI, miniDisplayPort, VGA, and DVI with the use of
adapter cables or adapters.
Note: The DisplayPort on the TS3+ is only compatible with active DisplayPort adapters. If you
attempt to use a passive adapter, your display will not function correctly. If you are not sure which
type you have, please check with your adapter manufacturer to ensure that it is an active adapter.
Any display connected to the DisplayPort will be regarded as a secondary display by default. This
can be changed in the “Display” section under “System Preferences”.
The TS3 Plus supports dual display functionality. However, the actual
resolutions are limited by GPU, OS, Driver and Firmware. Please refer to the
tables below for general information.
NOTE
Single Monitor: Using DisplayPort
Resolution
2K (2560 x 1600)
Full HD (1920 x 1080p)
4K
2K (2560 x 1600)
Full HD (1920 x 1080p)
Video Display Frequency
60 Hz
60 Hz
60 Hz*
30 Hz
30 Hz
Single Monitor
Yes
Yes
Yes
Yes
Yes
11
Single Monitor: Connected to Thunderbolt™ 3 Port
(With use of a USB-C Video Adapter connected to the Thunderbolt™ 3 port)
Resolution
5K
4K
2K (2560 x 1600)
Full HD (1920 x 1080p)
2K (2560 x 1600)
Full HD (1920 x 1080p)
Video Display Frequency
60 Hz
60 Hz
60 Hz
60 Hz
30 Hz
30 Hz
Single Monitor
Yes
Yes
Yes
Yes
Yes
Yes
Connecting Dual Monitors
*****************************************************************************
********************************************,youfirstneedtoconnectonemonitor
to the DisplayPort Connector on the TS3 Plus. This monitor can be any type of monitor you wish
to use. For example, if you are using a HDMI monitor, you will need to use an Active DisplayPort
to HDMI adapter.
To connect the second monitor, please connect a USB-C Video Adapter to the other Thunderbolt™
3 port on the TS3 Plus and then connect the monitor cable to the USB-C Video Adapter.*
*Adapters sold separately. Also available on the CalDigit Online Store.
Dual Monitors : Connected to DisplayPort & Thunderbolt™ 3 Port
(With use of a USB-C Video Adapter connected to the Thunderbolt™ 3 port)
Resolution
2K (2560 x 1600)
Full HD (1920 x 1080p)
4K
2K (2560 x 1600)
Full HD (1920 x 1080p)
Video Display Frequency
60 Hz
60 Hz
60 Hz*
30 Hz
30 Hz
Dual Monitor
Yes
Yes
Yes
Yes
Yes
12
Ethernet
The TS3 Plus has a single Gigabit Ethernet port to connect to a Gigabit Ethernet network. Your
computer will connect to whichever network is connected to the TS3 Plus by default. These
settings can be changed in the “Network” section under “System Preferences”. The Ethernet port
also supports wake-on-LAN which allows your computer to wake from standby remotely via the
network.
Audio
The TS3 Plus has one 3.5mm audio input and one 3.5mm amplified audio output. The audio
devices must be selected in the “Sound” section under “System Preferences”. The TS3 Plus’s audio
device will be listed as ‘CalDigit Thunderbolt 3 Audio’ in your settings.
13
CalDigit TS3 Plus Specifications
Package Dimension and Weight
• Height : 5.15 inches (131.0 mm)
• Width : 1.57 inches (40.0 mm)
• Depth : 3.87 inches (98.44 mm)
• Weight: 1.04 lbs (0.47 kgs)
Interface
• 2 x Thunderbolt™ 3
• 1 x DisplayPort 1.2
• 5 x USB 3.2 Type-A (5Gbps)
• 1 x USB 3.2 Type-C (5Gbps)
• 1 x USB 3.2 Type-C (10Gbps)
• 1 x SD Card Reader (SD 4.0 UHS-II)
• 1 x Digital Optical Audio (S/PDIF)
• 1 x Gigabit Ethernet
• 1 x 3.5mm Analog Audio In
• 1 x 3.5mm Analog Audio Out
Power
AC Input : 100V-240V ~50Hz/60Hz
DC Output: 20V/9.0A, 180W
System Requirements
Thunderbolt™ 3 computers
macOS 10.12 Sierra or later
Windows 10 or later
Environment
Ambient Temperature: 32°F ~ 140°F (0°C ~ 60°C)
14
CalDigit TS3 Plus Accessories
Thunderbolt™ 3 Cables
• Thunderbolt™ 3 Cable 0.5m (40Gb/s)
• Thunderbolt™ 3 Cable 1m (40Gb/s)
• Thunderbolt™ 3 Cable 2m (40Gb/s)
Power Supply
• CalDigit TS3Plus-180W AC Adapter PSU
USB-C Video Adapters
• CalDigit USB-C to DisplayPort adapter
• CalDigit USB-C to HDMI adapter
• CalDigit USB-C to VGA adapter
Please contact CalDigit or an authorized CalDigit reseller for availability and pricing.
15
3. Technical Support and Warranty Information
Technical Support
If you run into any issues while using your TS3 Plus, please contact CalDigit Technical Support.
•Email:********************
• Phone: (714) 572-6668
• Website: /
When contacting CalDigit Technical Support, make sure to be at your computer and have the
following information available:
1. Your TS3 Plus serial number
2. Operating system and version
3. Computer make and model
4. Devices being used on the TS3 Plus
Warranty Information
• The TS3 Plus is covered by a 1-year limited warranty.
• For detailed CalDigit warranty information please visit our website :
/rma/
Please visit for more information on all CalDigit products.
Specifications and package contents are subject to change without notice.
Thunderbolt™ and the Thunderbolt™ logo are trademarks of Intel Corporation in the U.S. and/or other countries.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC. All other trademarks mentioned are the property of their respective owners.
16
2024年9月14日发(作者：谷梁飞光)
USER GUIDE
For more information visit
Table of Contents
Section 1 : General Information
Introduction 3
General Use Warnings 3
Safety Warnings 3
System Requirements 4
In the Box 4
TS3 Plus Diagram 5
Section 2 : Using the TS3 Plus
Powering the TS3 Plus 7
Connecting the TS3 Plus 8
Using the TS3 Plus Utility 9
LED Indicator
Interfaces Summary 10
Thunderbolt™ 3
USB 3.2 Type-A
DisplayPort 1.2 11
Ethernet
Audio 13
TS3 Plus Accessories 15
Technical Specifications 14
Section 3 : Technical Support and
Warranty Information
Technical Support 16
Warranty
2
8
1
1
0
0
6
13
1
1. General Information
Introduction
The CalDigit Thunderbolt™ Station 3 Plus maximizes the potential of Thunderbolt™ 3’s 40G/s
throughout to add a plethora of devices to any Mac or PC Thunderbolt™ 3 enabled computer.
Featuring dual Thunderbolt™ 3 Type-C ports for daisy-chaining extra Thunderbolt™ 3 devices, the
TS3 Plus can fit into any workflow without sacrificing a Thunderbolt™ 3 port all while charging your
computer up to 87W.
General Use Warnings
•
Please read the TS3 Plus manual thoroughly and familiarize yourself with the product
before use.
•
Avoid using the TS3 Plus in extremely hot and cold environments. A safe temperature
range is between 40°F – 95°F (4.4°C - 35°C).
•
Avoid using the TS3 Plus in humid environments. Moisture and condensation can
accumulate in the device and cause damage to the electrical components.
•Only use the power adapter that has been supplied with the TS3 Plus. An excessive or
inadequate power supply can result in unstable performance or device failure.
Safety Warnings
•
Keep the TS3 Plus away from liquids and moisture. Exposure to liquids can result in
damaging the unit, electric shock, and result in a fire hazard.
•
If your TS3 Plus gets wet while it is still off, do not turn it on. In the case of any issue with the
device, do not attempt to repair or open the device yourself. Doing so can result in personal
injury, damage the device, and will void the warranty. If you have any issues, please contact
CalDigit Technical Support.
3
System Requirements
Thunderbolt™ 3 computers
macOS 10.12 Sierra or later
Windows 7, 8, 10 or later
In the Box
A • 1 x CalDigit TS3 Plus
B
• 1 x Power Supply
C • 1 x Power Cord
(plug style may vary based on regional regulations and requirements.)
D • 1 x Thunderbolt™ 3 Cable (Optional)
E • 2 x Rubber Feet Strips
A
C
B
D
E
4
TS3 Plus Diagram
USB 3.2 Type-A
SD Card Reader
USB 3.2 Type-C
Digital Optical
Audio In/Out
USB 3.2 Type-C
Gigabit Ethernet
DC In
USB 3.2 Type-A
5
USB 3.2USB 3.2
USB 3.2USB 3.2
6
2. Using the TS3 Plus
Powering the TS3 Plus
CalDigit TS3 Plus requires power from the AC adapter to operate. Connect the AC adapter
connector to the DC jack on the back of the TS3 Plus and the other side to an AC outlet.
power off the TS3 Plus, disconnect the power cable from the AC outlet.
7
NOTE
Always use the supplied Thunderbolt™ 3 cable or a certified 40Gb/s
Thunderbolt™ 3 cable.
Connecting the TS3 Plus to your computer
Once the TS3 Plus has been powered on, connect the device using a Thunderbolt™ 3 cable from
one of the Thunderbolt™ 3 port labeled “Computer” on the TS3 Plus to a Thunderbolt™ 3 port on
your computer. This single connection will now provide 87W charging for your laptop in addition
to expanding your connectivity options.
LED Indicator
The TS3 Plus is equipped with an LED indicator, which will display a BLUE light if the unit is powered
on and connected to your computer.
ONOFF
8
CalDigit Docking Station Utility
The CalDigit Docking Station Utility makes it incredibly easy to disconnect all your USB storage
devices from the TS3 Plus without the need to manually disconnect them one by one.
NOTE
The CalDigit Docking Station Utility Installer file needs to be downloaded and
installed on your Mac from the CalDigit website. Please go to it.
com/ to download the Installer package.
Disconnecting all USB storage devices
1. Open the CalDigit Docking Station Utility on the top menu bar.
2. Click the eject button on the TS3 Plus image.
Disconnecting individual USB storage devices
1. Open the CalDigit Docking Station Utility on the top menu bar.
2. Click on the specific USB device you would like to eject. Only that device will be ejected.
9
Interface Summary
Thunderbolt™ 3
The TS3 Plus features two Thunderbolt™ 3
Type-C ports that can transfer at speeds up to
40Gb/s. One port is reserved for the connection
to your host computer and the second can be
used to connect extra Thunderbolt™ 3 devices.
Thunderbolt™ 3 Type-C supports video and
data. The Thunderbolt™ host port also provides
charging up to 87W for your computer.
USB 3.2 Type-C
The TS3 Plus features two USB 3.2 Type-C ports (1 x 5Gb/s, 1 x 10Gb/s). These ports only support
data and 1500mA of power for charging. Video capabilities are not supported.
Front (x1)
USB 3.2 Type-A
Rear(x1)
The TS3 Plus features a total of five USB 3.2 Type-A ports (5 x 5Gb/s)
Front (x1)Rear(x4)
UHS-II SD Card Slot
The front-facing UHS-I SD (4.0) Card slot is
capable of transfer speeds up to 312MB/s.
This slot is also backwards compatible with
SDXC, SDHC, and standard SD cards.
Optical Audio (S/PDIF)
The TS3 Plus features one optical audio port
that can be used to connect a compatible AV
receiver using TOSLINK cables..
10
DisplayPort
The TS3 Plus features a full-size DisplayPort that supports a maximum resolution up to
4K. DisplayPort can be easily converted to HDMI, miniDisplayPort, VGA, and DVI with the use of
adapter cables or adapters.
Note: The DisplayPort on the TS3+ is only compatible with active DisplayPort adapters. If you
attempt to use a passive adapter, your display will not function correctly. If you are not sure which
type you have, please check with your adapter manufacturer to ensure that it is an active adapter.
Any display connected to the DisplayPort will be regarded as a secondary display by default. This
can be changed in the “Display” section under “System Preferences”.
The TS3 Plus supports dual display functionality. However, the actual
resolutions are limited by GPU, OS, Driver and Firmware. Please refer to the
tables below for general information.
NOTE
Single Monitor: Using DisplayPort
Resolution
2K (2560 x 1600)
Full HD (1920 x 1080p)
4K
2K (2560 x 1600)
Full HD (1920 x 1080p)
Video Display Frequency
60 Hz
60 Hz
60 Hz*
30 Hz
30 Hz
Single Monitor
Yes
Yes
Yes
Yes
Yes
11
Single Monitor: Connected to Thunderbolt™ 3 Port
(With use of a USB-C Video Adapter connected to the Thunderbolt™ 3 port)
Resolution
5K
4K
2K (2560 x 1600)
Full HD (1920 x 1080p)
2K (2560 x 1600)
Full HD (1920 x 1080p)
Video Display Frequency
60 Hz
60 Hz
60 Hz
60 Hz
30 Hz
30 Hz
Single Monitor
Yes
Yes
Yes
Yes
Yes
Yes
Connecting Dual Monitors
*****************************************************************************
********************************************,youfirstneedtoconnectonemonitor
to the DisplayPort Connector on the TS3 Plus. This monitor can be any type of monitor you wish
to use. For example, if you are using a HDMI monitor, you will need to use an Active DisplayPort
to HDMI adapter.
To connect the second monitor, please connect a USB-C Video Adapter to the other Thunderbolt™
3 port on the TS3 Plus and then connect the monitor cable to the USB-C Video Adapter.*
*Adapters sold separately. Also available on the CalDigit Online Store.
Dual Monitors : Connected to DisplayPort & Thunderbolt™ 3 Port
(With use of a USB-C Video Adapter connected to the Thunderbolt™ 3 port)
Resolution
2K (2560 x 1600)
Full HD (1920 x 1080p)
4K
2K (2560 x 1600)
Full HD (1920 x 1080p)
Video Display Frequency
60 Hz
60 Hz
60 Hz*
30 Hz
30 Hz
Dual Monitor
Yes
Yes
Yes
Yes
Yes
12
Ethernet
The TS3 Plus has a single Gigabit Ethernet port to connect to a Gigabit Ethernet network. Your
computer will connect to whichever network is connected to the TS3 Plus by default. These
settings can be changed in the “Network” section under “System Preferences”. The Ethernet port
also supports wake-on-LAN which allows your computer to wake from standby remotely via the
network.
Audio
The TS3 Plus has one 3.5mm audio input and one 3.5mm amplified audio output. The audio
devices must be selected in the “Sound” section under “System Preferences”. The TS3 Plus’s audio
device will be listed as ‘CalDigit Thunderbolt 3 Audio’ in your settings.
13
CalDigit TS3 Plus Specifications
Package Dimension and Weight
• Height : 5.15 inches (131.0 mm)
• Width : 1.57 inches (40.0 mm)
• Depth : 3.87 inches (98.44 mm)
• Weight: 1.04 lbs (0.47 kgs)
Interface
• 2 x Thunderbolt™ 3
• 1 x DisplayPort 1.2
• 5 x USB 3.2 Type-A (5Gbps)
• 1 x USB 3.2 Type-C (5Gbps)
• 1 x USB 3.2 Type-C (10Gbps)
• 1 x SD Card Reader (SD 4.0 UHS-II)
• 1 x Digital Optical Audio (S/PDIF)
• 1 x Gigabit Ethernet
• 1 x 3.5mm Analog Audio In
• 1 x 3.5mm Analog Audio Out
Power
AC Input : 100V-240V ~50Hz/60Hz
DC Output: 20V/9.0A, 180W
System Requirements
Thunderbolt™ 3 computers
macOS 10.12 Sierra or later
Windows 10 or later
Environment
Ambient Temperature: 32°F ~ 140°F (0°C ~ 60°C)
14
CalDigit TS3 Plus Accessories
Thunderbolt™ 3 Cables
• Thunderbolt™ 3 Cable 0.5m (40Gb/s)
• Thunderbolt™ 3 Cable 1m (40Gb/s)
• Thunderbolt™ 3 Cable 2m (40Gb/s)
Power Supply
• CalDigit TS3Plus-180W AC Adapter PSU
USB-C Video Adapters
• CalDigit USB-C to DisplayPort adapter
• CalDigit USB-C to HDMI adapter
• CalDigit USB-C to VGA adapter
Please contact CalDigit or an authorized CalDigit reseller for availability and pricing.
15
3. Technical Support and Warranty Information
Technical Support
If you run into any issues while using your TS3 Plus, please contact CalDigit Technical Support.
•Email:********************
• Phone: (714) 572-6668
• Website: /
When contacting CalDigit Technical Support, make sure to be at your computer and have the
following information available:
1. Your TS3 Plus serial number
2. Operating system and version
3. Computer make and model
4. Devices being used on the TS3 Plus
Warranty Information
• The TS3 Plus is covered by a 1-year limited warranty.
• For detailed CalDigit warranty information please visit our website :
/rma/
Please visit for more information on all CalDigit products.
Specifications and package contents are subject to change without notice.
Thunderbolt™ and the Thunderbolt™ logo are trademarks of Intel Corporation in the U.S. and/or other countries.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC. All other trademarks mentioned are the property of their respective owners.
16