2024年11月5日发(作者：塞映冬)
1
9
8
1
6630B Series Single-Output,
80-100 W GPIB Power Supplies
Data Sheet
Speed and accuracy for test optimization
• Fast, low-noise outputs
• Programmable active down-programmer sinks the full rated current
• Dual-range, precision low current measurement
• Optional isolation and polarity reversal relays
• Built-in measurements and advanced programmable features
• Protection features to ensure DUT safety
This series of linear-regulated 80-100 W commands via the GPIB or RS-232.
DC power supplies is designed to max-Test system integration is further
imize the throughput of DUTs through simplified by using the VXIplug&play
the manufacturing test process. Both drivers. The optional relays simplify
programming and measurement system design and troubleshooting.
are optimized for speed. The active
downprogrammer can sink up to the
The optional front panel binding posts
full rated current of the power supply,
make the 6630B series convenient
which quickly brings the power supply
on the R&D lab bench. The built-in
output to zero volts. The 6630B series
microamp measurement system helps
offers many advanced programmable
the engineer to easily and accurately
features including stored states and
monitor the output voltage and current
status reporting. Programming is
without a complicated test setup.
done using industry standard SCPI
Specifi cations
Specifications
(at 0 ° to 55 °C unless other wise specified)
Number of outputs
GPIB
Output ratings
Voltage
Current
Programming accuracy at 25 °C ± 5 °C
Voltage
+Current
Ripple and noise
20 Hz to 20 MHz, with outputs ungrounded
or with either terminal grounded
Voltage normal mode
Fast mode
Current
DC measurement accuracy
via GPIB or front-panel meters with respect
to actual output at 25 °C ± 5 °C
Voltage
Low current range
–20 mA to +20 mA
High current range
+20 mA to + rated I
–20 mA to – rated I
Load regulation
Voltage
Current
Line regulation
Voltage
Current
0.5 mV
1 mA
0.5 mV
0.5 mA
1 mV
0.25 mA
1 mV
0.25 mA
2 mV
2 mA
2 mV
1 mA
4 mV
1 mA
5 mV
1 mA
0.03% +
0.1% +
0.2% +
0.2% +
2 mV
2.5 μA
1 mA
1.6 mA
3 mV
2.5 μA
0.5 mA
1.1 mA
6 mV
2.5 μA
0.25 mA
0.85 mA
12 mV
2.5 μA
0.25 mA
0.85 mA
rms
peak-to-peak
rms
peak-to-peak
rms
0.3 mV
3 mV
1 mV
10 mV
3 mA
0.3 mV
3 mV
1 mV
10 mV
2 mA
0.5 mV
3 mV
1 mV
15 mV
2 mA
0.5 mV
3 mV
2 mV
25 mV
2 mA
0.05% +
5 mV
4 mA
10 mV
2 mA
20 mV
1 mA
50 mV
0.5 mA
0 to 8 V
0 to 10 A
0 to 20 V
0 to 5 A
0 to 50 V
0 to 2 A
0 to 100 V
0 to 1 A
6631B6632B6633B6634B
1 1 1 1
Yes Yes Yes Yes
Transient response time
Less than 100 μs (50 μs in the fast mode) for the output voltage to recover to its previous level (within 0.1% of the voltage rating of
the supply or 20 mV) following any step change in load current of up to 50% of the output current rating of the supply.
Supplemental characteristics
(Non-warranted characteristics determined by design and
useful in applying the product)
Average programming resolution
Voltage
Current
Sink current
Sink current tracking
SCPI mode
Compatibility mode
Minimum current in constant current mode*
* When programming in the 6630A Series language compatibility mode
6631B6632B6633B6634B
2 mV
2.5 mA
10 A
0.4% + 4 mA
–500 mA
40 mA
5 mV
1.25 mA
5 A
0.4% + 2 mA
–250 mA
20 mA
12.5 mV
0.5 mA
2 A
0.4% +1 mA
–100 mA
8 mA
25 mV
0.25 mA
1 A
0.4% + 5 mA
–50 mA
4 mA
2
Supplemental characteristics
for all model numbers
DC floating voltage: Output terminals
can be floated up to ± 240 VDC
maximum from chassis ground
Remote sensing: Up to two volts
dropped in each load lead. Add 2 mV
to the voltage load regulation speci-
fication for each one volt change in
the positive output lead due to load
current change.
Command processing time: Average
time required for the output voltage
to begin to change following receipt
of digital data is 4 ms for the power
supplies connected directly to the
GPIB. (Display disabled).
Output programming response time:
The rise and fall time (10/90% and
90/10%) of the output voltage is less
than 2 ms (400 μs in fast mode). The
output voltage change settles within
1 LSB (0.025% x rated voltage) of final
value in less than 6 ms (2 ms in the
fast mode).
GPIB interface capabilities:
IEEE-488.2, SCPI command set,
and 6630A Series programming
compatibility
Software driver: VXIplug&play
Measurement time: Average time
to make a voltage or current
measurement is 50 ms.
Input power (full load): 3.5 A, 250 W
Regulatory compliance: Complies with
EMC directive 89/336/EEC (ISM 1B).
Size:
425.5 mm W x 88.1 mm H x 364.4 mm D
(16.8 in x 3.5 in x 14.3 in)
Weight: Net, 12.7 kg (28 lb) net;
15.0 kg (33 lb) shipping
Warranty: One year
Agilent Models: 6631B, 6632B 6633B, 6634B
Top
364.4 mm
14.3"
Terminal Strip Detail
Output 2 & 3
+S +
-
-S
Screw Size:
M35 x 0.6
100 mm
3.93"
425.4 mm
16.75"
88.1 mm
3.5"
Side
Rear
3
Ordering information
Opt 100 87 to 106 VAC, 47 to 63 Hz
Opt 120 104 to 127 VAC, 47 to 63 Hz
Opt 220 191 to 233 VAC, 47 to 63 Hz
Opt 230 207 to 253 VAC, 47 to 63 Hz
Opt 020 Front-panel binding posts
(N/A on 6631B)
Opt 760 Isolation and reversal relays,
only available at time of order
(not available on the 6631B)
Opt 8ZJ Removes feet for use in a
racked system
Opt 0L1 Full documentation on
CD-ROM, and printed standard docu-
mentation package. CD-ROM includes
User’s Guide, Programming Guide,
Service Manual and Quick Start Guide
Opt 0B3 Service manual
Accessories
p/n 1494-0060 Rack slide kit
E3663AC Support rails for Agilent
rack cabinets
1CM002A* Rack mount flange kit
88.1mm H (2U), two flange brackets:
1.75 inch hole spacing
1CP001A* Rack mount flange and
handle kit 88.1 mm H (2U), two
brackets and front handles
Application notes
10 Practical Tips You Need to Know
About Your Power Products,
5965-8239E
10 Hints for Using Your Power Supply
to Decrease Test Time, 5968-6359E
Understanding Linear Power Supply
Operation (AN1554), 5989-2291EN
* Support rails required
/find/6630
For more information on Agilent
Technologies’ products, applications or
services, please contact your local Agilent
office. The complete list is available at:
/fi nd/contactus
Agilent Advantage Services is committed
to your success throughout your equip-
Americas
ment’s lifetime. To keep you competitive,
Canada (877) 894 4414
we continually invest in tools and
Brazil (11) 4197 3600
processes that speed up calibration and
Mexico 01800 5064 800
repair and reduce your cost of ownership.
United States (800) 829 4444
You can also use Infoline Web Services
to manage equipment and services more
Asia Pacifi c
effectively. By sharing our measurement
Australia 1 800 629 485
and service expertise, we help you create
China 800 810 0189
the products that change our world.
Hong Kong 800 938 693
India 1 800 112 929
/find/advantageservices
Japan 0120 (421) 345
Korea 080 769 0800
Malaysia 1 800 888 848
Singapore 180****8100
Taiwan 0800 047 866
Other AP Countries (65) 375 8100
/quality
Europe & Middle East
Belgium 32 (0) 2 404 93 40
Denmark 45 45 80 12 15
Agilent Email Updates
Finland 358 (0) 10 855 2100
/find/emailupdates
France 0825 010 700*
*0.125 €/minute
Get the latest information on the
Germany 49 (0) 7031 464 6333
products and applications you select.
Ireland 1890 924 204
Israel 972-3-9288-504/544
Agilent Channel Partners
Italy 39 02 92 60 8484
/find/channelpartners
Netherlands 31 (0) 20 547 2111
Get the best of both worlds: Agilent’s
Spain 34 (91) 631 3300
measurement expertise and product
Sweden 0200-88 22 55
United Kingdom 44 (0) 118 927 6201
breadth, combined with channel
partner convenience.
For other unlisted countries:
/fi nd/contactus
Revised: January 6, 2012
Product specifications and descriptions
in this document subject to change
without notice.
© Agilent Technologies, Inc. 2012
Published in USA, January 26, 2012
5990-9303EN
2024年11月5日发(作者：塞映冬)
1
9
8
1
6630B Series Single-Output,
80-100 W GPIB Power Supplies
Data Sheet
Speed and accuracy for test optimization
• Fast, low-noise outputs
• Programmable active down-programmer sinks the full rated current
• Dual-range, precision low current measurement
• Optional isolation and polarity reversal relays
• Built-in measurements and advanced programmable features
• Protection features to ensure DUT safety
This series of linear-regulated 80-100 W commands via the GPIB or RS-232.
DC power supplies is designed to max-Test system integration is further
imize the throughput of DUTs through simplified by using the VXIplug&play
the manufacturing test process. Both drivers. The optional relays simplify
programming and measurement system design and troubleshooting.
are optimized for speed. The active
downprogrammer can sink up to the
The optional front panel binding posts
full rated current of the power supply,
make the 6630B series convenient
which quickly brings the power supply
on the R&D lab bench. The built-in
output to zero volts. The 6630B series
microamp measurement system helps
offers many advanced programmable
the engineer to easily and accurately
features including stored states and
monitor the output voltage and current
status reporting. Programming is
without a complicated test setup.
done using industry standard SCPI
Specifi cations
Specifications
(at 0 ° to 55 °C unless other wise specified)
Number of outputs
GPIB
Output ratings
Voltage
Current
Programming accuracy at 25 °C ± 5 °C
Voltage
+Current
Ripple and noise
20 Hz to 20 MHz, with outputs ungrounded
or with either terminal grounded
Voltage normal mode
Fast mode
Current
DC measurement accuracy
via GPIB or front-panel meters with respect
to actual output at 25 °C ± 5 °C
Voltage
Low current range
–20 mA to +20 mA
High current range
+20 mA to + rated I
–20 mA to – rated I
Load regulation
Voltage
Current
Line regulation
Voltage
Current
0.5 mV
1 mA
0.5 mV
0.5 mA
1 mV
0.25 mA
1 mV
0.25 mA
2 mV
2 mA
2 mV
1 mA
4 mV
1 mA
5 mV
1 mA
0.03% +
0.1% +
0.2% +
0.2% +
2 mV
2.5 μA
1 mA
1.6 mA
3 mV
2.5 μA
0.5 mA
1.1 mA
6 mV
2.5 μA
0.25 mA
0.85 mA
12 mV
2.5 μA
0.25 mA
0.85 mA
rms
peak-to-peak
rms
peak-to-peak
rms
0.3 mV
3 mV
1 mV
10 mV
3 mA
0.3 mV
3 mV
1 mV
10 mV
2 mA
0.5 mV
3 mV
1 mV
15 mV
2 mA
0.5 mV
3 mV
2 mV
25 mV
2 mA
0.05% +
5 mV
4 mA
10 mV
2 mA
20 mV
1 mA
50 mV
0.5 mA
0 to 8 V
0 to 10 A
0 to 20 V
0 to 5 A
0 to 50 V
0 to 2 A
0 to 100 V
0 to 1 A
6631B6632B6633B6634B
1 1 1 1
Yes Yes Yes Yes
Transient response time
Less than 100 μs (50 μs in the fast mode) for the output voltage to recover to its previous level (within 0.1% of the voltage rating of
the supply or 20 mV) following any step change in load current of up to 50% of the output current rating of the supply.
Supplemental characteristics
(Non-warranted characteristics determined by design and
useful in applying the product)
Average programming resolution
Voltage
Current
Sink current
Sink current tracking
SCPI mode
Compatibility mode
Minimum current in constant current mode*
* When programming in the 6630A Series language compatibility mode
6631B6632B6633B6634B
2 mV
2.5 mA
10 A
0.4% + 4 mA
–500 mA
40 mA
5 mV
1.25 mA
5 A
0.4% + 2 mA
–250 mA
20 mA
12.5 mV
0.5 mA
2 A
0.4% +1 mA
–100 mA
8 mA
25 mV
0.25 mA
1 A
0.4% + 5 mA
–50 mA
4 mA
2
Supplemental characteristics
for all model numbers
DC floating voltage: Output terminals
can be floated up to ± 240 VDC
maximum from chassis ground
Remote sensing: Up to two volts
dropped in each load lead. Add 2 mV
to the voltage load regulation speci-
fication for each one volt change in
the positive output lead due to load
current change.
Command processing time: Average
time required for the output voltage
to begin to change following receipt
of digital data is 4 ms for the power
supplies connected directly to the
GPIB. (Display disabled).
Output programming response time:
The rise and fall time (10/90% and
90/10%) of the output voltage is less
than 2 ms (400 μs in fast mode). The
output voltage change settles within
1 LSB (0.025% x rated voltage) of final
value in less than 6 ms (2 ms in the
fast mode).
GPIB interface capabilities:
IEEE-488.2, SCPI command set,
and 6630A Series programming
compatibility
Software driver: VXIplug&play
Measurement time: Average time
to make a voltage or current
measurement is 50 ms.
Input power (full load): 3.5 A, 250 W
Regulatory compliance: Complies with
EMC directive 89/336/EEC (ISM 1B).
Size:
425.5 mm W x 88.1 mm H x 364.4 mm D
(16.8 in x 3.5 in x 14.3 in)
Weight: Net, 12.7 kg (28 lb) net;
15.0 kg (33 lb) shipping
Warranty: One year
Agilent Models: 6631B, 6632B 6633B, 6634B
Top
364.4 mm
14.3"
Terminal Strip Detail
Output 2 & 3
+S +
-
-S
Screw Size:
M35 x 0.6
100 mm
3.93"
425.4 mm
16.75"
88.1 mm
3.5"
Side
Rear
3
Ordering information
Opt 100 87 to 106 VAC, 47 to 63 Hz
Opt 120 104 to 127 VAC, 47 to 63 Hz
Opt 220 191 to 233 VAC, 47 to 63 Hz
Opt 230 207 to 253 VAC, 47 to 63 Hz
Opt 020 Front-panel binding posts
(N/A on 6631B)
Opt 760 Isolation and reversal relays,
only available at time of order
(not available on the 6631B)
Opt 8ZJ Removes feet for use in a
racked system
Opt 0L1 Full documentation on
CD-ROM, and printed standard docu-
mentation package. CD-ROM includes
User’s Guide, Programming Guide,
Service Manual and Quick Start Guide
Opt 0B3 Service manual
Accessories
p/n 1494-0060 Rack slide kit
E3663AC Support rails for Agilent
rack cabinets
1CM002A* Rack mount flange kit
88.1mm H (2U), two flange brackets:
1.75 inch hole spacing
1CP001A* Rack mount flange and
handle kit 88.1 mm H (2U), two
brackets and front handles
Application notes
10 Practical Tips You Need to Know
About Your Power Products,
5965-8239E
10 Hints for Using Your Power Supply
to Decrease Test Time, 5968-6359E
Understanding Linear Power Supply
Operation (AN1554), 5989-2291EN
* Support rails required
/find/6630
For more information on Agilent
Technologies’ products, applications or
services, please contact your local Agilent
office. The complete list is available at:
/fi nd/contactus
Agilent Advantage Services is committed
to your success throughout your equip-
Americas
ment’s lifetime. To keep you competitive,
Canada (877) 894 4414
we continually invest in tools and
Brazil (11) 4197 3600
processes that speed up calibration and
Mexico 01800 5064 800
repair and reduce your cost of ownership.
United States (800) 829 4444
You can also use Infoline Web Services
to manage equipment and services more
Asia Pacifi c
effectively. By sharing our measurement
Australia 1 800 629 485
and service expertise, we help you create
China 800 810 0189
the products that change our world.
Hong Kong 800 938 693
India 1 800 112 929
/find/advantageservices
Japan 0120 (421) 345
Korea 080 769 0800
Malaysia 1 800 888 848
Singapore 180****8100
Taiwan 0800 047 866
Other AP Countries (65) 375 8100
/quality
Europe & Middle East
Belgium 32 (0) 2 404 93 40
Denmark 45 45 80 12 15
Agilent Email Updates
Finland 358 (0) 10 855 2100
/find/emailupdates
France 0825 010 700*
*0.125 €/minute
Get the latest information on the
Germany 49 (0) 7031 464 6333
products and applications you select.
Ireland 1890 924 204
Israel 972-3-9288-504/544
Agilent Channel Partners
Italy 39 02 92 60 8484
/find/channelpartners
Netherlands 31 (0) 20 547 2111
Get the best of both worlds: Agilent’s
Spain 34 (91) 631 3300
measurement expertise and product
Sweden 0200-88 22 55
United Kingdom 44 (0) 118 927 6201
breadth, combined with channel
partner convenience.
For other unlisted countries:
/fi nd/contactus
Revised: January 6, 2012
Product specifications and descriptions
in this document subject to change
without notice.
© Agilent Technologies, Inc. 2012
Published in USA, January 26, 2012
5990-9303EN