松下KX-TGA101C无线电话手柄安装说明书-USB迷|专注于互联网分享

2024年9月20日发(作者：上官巧)

Installation Manual

Expandable Digital Cordless Handset

Model No.

KX-TGA101C

Thank you for purchasing a Panasonic cordless telephone.

This handset is an accessory handset for use with Panasonic base units

KX-TG1032C/KX-TG1033C/KX-TG1034C. You must register this

handset with your base unit before it can be used.

This installation manual describes only the steps needed to register and

begin using the handset. Please read the base unit’s operating

instructions for further details.

Charge the batteries for 7 hours before initial use.

Please read this Installation Manual before using the unit and save for

future reference.

For assistance, please call 1-800-561-5505 or visit us at

PQQX16270ZA

FC0307FT0

Accessory information

Included accessories

Accessory item

Charger

AC adaptor for charger

Batteries

Handset cover

Belt clip

*1The handset cover comes attached to the handset.

Quantity

Additional/replacement accessories

Accessory item

Rechargeable nickel metal

hydride (Ni-MH) batteries

Order number

HHR-4DPA

Setting up the handset

Connecting the charger

(120 V AC, 60 Hz)

Bottom of the charger

Hooks

Fasten the AC adaptor cord to

prevent it from being disconnected.

Note:

LUse only the included Panasonic AC adaptor PQLV209.

LThe AC adaptor must remain connected at all times. (It is normal for the adaptor to

feel warm during use.)

LThe AC adaptor should be connected to a vertically oriented or floor-mounted AC

outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight

of the adaptor may cause it to become disconnected.

Battery installation

Press the notch of the handset cover

firmly, and slide it in the direction of

the arrow.

Battery charge

Place the handset on the charger for 7

hours before initial use.

Insert the batteries negative (T) end

first. Close the handset cover.

Charge

contacts

Note:

LIf you want to use the handset

immediately, charge the batteries for

at least 15 minutes.

LTo ensure that the batteries charge

properly, clean the charge contacts of

the handset and charger with a soft,

dry cloth once a month. Clean more

often if the unit is subject to the

exposure of grease, dust, or high

humidity.

Panasonic battery performance

Operation

While in use

(talking)

While not in use

(standby)

Operating time

Up to 17 hours

Up to 11 days

Important:

LUSE ONLY Ni-MH batteries AAA

(R03) size.

LDo NOT use Alkaline/Manganese/Ni-

Cd batteries.

LInstall the batteries in proper order

(S, T), matching the correct polarity.

Attention:

A nickel metal hydride battery that is

recyclable powers the product you have

purchased.

Please call 1-800-8-BATTERY (1-800-

822-8837) for information on how to

recycle this battery.

Note:

LThe handset can be left on the

charger without any ill effect on the

batteries.

LThe battery level may not be

displayed correctly or the entire

display may go blank after you

replace the batteries. In this case,

place the handset on the charger and

let charge for 7 hours.

Registration

TG1032C/KX-TG1033C/KX-TG1034C

base unit.

Belt clip

You can hang the handset on your belt

or pocket using the included belt clip.

To attach the belt clip

Base unit:

Press and hold {LOCATOR} until

the registration tone sounds.

LIf all registered handsets start

ringing, press {LOCATOR} to

stop, then repeat this step.

LAfter the base unit beeps, the rest

of the procedure must be

completed within 1 minute and 30

seconds.

Handset:

Press {OK}, then wait until a beep

sounds and w stops flashing.

To remove the belt clip

While pressing the top of the clip (A),

pull the right edge in the direction of the

arrow (B).

Changing the display

language

{MENU}

{V}/{^}: “Handset settings” i

{OK}

{V}/{^}: “Display settings” i

{OK}

{V}/{^}: “Change language” i

{OK}

{V}/{^}: Select the desired setting.

{OK} i {OFF}

Headset (optional)

Connecting a headset to the handset

allows hands-free phone

conversations. We recommend using a

Panasonic RP-TCA86/RP-TCA91/RP-

TCA92/RP-TCA94/RP-TCA95

headset.

LHeadset shown is RP-TCA86.

■Power source:

120 V AC, 60 Hz

■Power consumption:

Charger:

Standby: Approx. 0.7 W

Maximum: Approx. 3.5 W

■Operating conditions:

5 °C – 40 °C (41°F – 104°F), 20 % – 80

% relative air humidity (dry)

■Dimensions:

Handset: Approx. 169 mm × 49 mm ×

35 mm

inches × 1

inches)

Charger: Approx. 51 mm × 81 mm × 91

(2 inches × 3

inches × 3

inches)

■Mass (weight):

Handset: Approx. 140 g (0.31 lb.)

Charger: Approx. 70 g (0.15 lb.)

Note:

LDesign and specifications are subject

to change without notice.

LThe illustrations in these instructions

may vary slightly from the actual

product.

Specifications

■Standard:

DECT 6.0 (Digital Enhanced Cordless

Telecommunications 6.0)

■Number of channels:

60 Duplex Channels

■Frequency range:

1.92 GHz to 1.93 GHz

■Duplex procedure:

TDMA (Time Division Multiple Access)

■Channel spacing:

1,728 kHz

■Bit rate:

1,152 kbit/s

■Modulation:

GFSK (Gaussian Frequency Shift

Keying)

■RF transmission power:

Approx. 100 mW

■Voice coding:

ADPCM 32 kbit/s

WARNING:

Important safety

instructions

CAUTION:

Installation

LOperating the product near electrical

appliances may cause interference.

Move away from the electrical

appliances.

LThe AC adaptor is used as the main

disconnect device. Ensure that the

AC outlet is installed near the product

and is easily accessible.

Battery

To reduce the risk of fire or injury to

persons, read and follow these

instructions.

LUse only the battery(ies) specified.

LDo not dispose of the battery(ies) in a

fire. They may explode. Check with

local waste management codes for

special disposal instructions.

LDo not open or mutilate the

battery(ies). Released electrolyte is

corrosive and may cause burns or

injury to the eyes or skin. The

electrolyte may be toxic if swallowed.

LExercise care when handling the

battery(ies). Do not allow conductive

materials such as rings, bracelets or

keys to touch the battery(ies),

otherwise a short circuit may cause

the battery(ies) and/or the conductive

material to overheat and cause burns.

LCharge the battery(ies) provided, or

identified for use with the product

only, in accordance with the

instructions and limitations specified

in this manual.

LTo prevent the risk of fire or electrical

shock, do not expose the product to

rain or any type of moisture.

LUnplug the product from power

outlets if it emits smoke, an abnormal

smell, or makes an unusual noise.

These conditions can cause fire or

electric shock. Confirm that smoke

has stopped emitting and contact an

authorized service centre.

LDo not place or use this product near

automatically controlled devices such

as automatic doors and fire alarms.

Radio waves emitted from this

product may cause such devices to

malfunction resulting in an accident.

LCompletely insert the AC adaptor/

power plug into the power outlet.

Failure to do so may cause electric

shock and/or excessive heat resulting

in a fire.

LRegularly remove any dust, etc. from

the AC adaptor/power plug by pulling

it from the power outlet, then wiping

with a dry cloth. Accumulated dust

may cause an insulation defect from

moisture, etc. resulting in a fire.

NOTICE:

Operation is subject to the following two

conditions: (1) this device may not

cause interference, and (2) this device

must accept any interference, including

interference that may cause undesired

operation of the device.

Privacy of communications may not be

ensured when using this telephone.

The term “IC:” before the radio

certification number only signifies that

Industry Canada radio technical

specifications were met.

RF Exposure Warning:

L This product complies with IC

radiation exposure limits set forth for

an uncontrolled environment.

L This handset may not be collocated

or operated in conjunction with any

other antenna or transmitter.

L The handset may be carried and

operated with only the specific

provided belt-clip. Other non-tested

belt-clips or similar body-worn

accessories may not comply and

must be avoided.

This material is copyrighted by

Panasonic Communications Co., Ltd.,

and may be reproduced for internal use

only. All other reproduction, in whole or

in part, is prohibited without the written

consent of Panasonic Communications

Co., Ltd.

Warranty

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario L4W 2T3

PANASONIC PRODUCT - LIMITED WARRANTY

Panasonic Canada Inc. warrants this product to be free from defects in material

and workmanship and agrees to remedy any such defect for a period as stated

below from the date of original purchase.

Telephone Accessory / Product - One (1) year, parts and labour

LIMITATIONS AND EXCLUSIONS

This warranty does not apply to products purchased outside Canada or to any

product which has been improperly installed, subjected to usage for which the

product was not designed, misused or abused, damaged during shipping, or which

has been altered or repaired in any way that affects the reliability or detracts from

the performance, nor does it cover any product which is used commercially. Dry

cell batteries are also excluded from coverage under this warranty. Rechargeable

batteries are warranted for ninety (90) days from date of original purchase.

This warranty is extended to the original end user purchaser only. A purchase

receipt or other proof of date of original purchase is required before warranty

service is performed.

THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE.

IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY

SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES.

In certain instances, some jurisdictions do not allow the exclusion or limitation of

incidental or consequential damages, or the exclusion of implied warranties, so the

above limitations and exclusions may not be applicable.

WARRANTY SERVICE

FOR PRODUCT OPERATION ASSISTANCE, please contact:

Our Customer Care Centre: Telephone #: (905) 624-5505

1-800 #: 1-800-561-5505

Fax #: (905) 238-2360

Email link: “Contact Us” on

FOR PRODUCT REPAIRS, please locate your nearest Authorized Servicentre at

Link : “Servicentres

locator” under “Customer support”

IF YOU SHIP THE PRODUCT TO A SERVICENTRE

Carefully pack and send prepaid, adequately insured and preferably in the original

carton.

Include details of the defect claimed, and proof of date of original purchase.