2024年9月29日发(作者：朱绮烟)

4.0x4.0mm RIGHT ANGLE SURFACE MOUNT

LED LAMP

Part Number: AA4040SESK Super Bright Orange

Features

zSingle color.

zSuitable for all SMT assembly and solder process.

zAvailable on tape and reel.

zIdeal for backlighting.

zPackage : 500pcs / reel.

zMoisture sensitivity level : level 3.

zRoHS compliant.

Description

The Super Bright Orange device is made with AlGaInP (on

GaAs substrate) light emitting diode chip.

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

4. The device has a single mounting surface. The device must be mounted according to the specifications.

SPEC NO: DSAL0883 REV NO: V.3 DATE: APR/13/2011 PAGE: 1 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: ERP: 1201006829

芯天下--/

Handling Precautions

Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic

significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.

As a result, special handling precautions need to be observed during assembly using silicone encapsulated

LED products. Failure to comply might lead to damage and premature failure of the LED.

1. Handle the component along the side surfaces by using forceps or appropriate tools.

2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.

3. As silicone encapsulation is permeable to gases, some corrosive substances such as H

2

S might corrode silver plating of

leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.

SPEC NO: DSAL0883 REV NO: V.3 DATE: APR/13/2011 PAGE: 2 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: ERP: 1201006829

芯天下--/

Selection Guide

Part No. Dice Lens Type

Viewing Iv (mcd) [2]

@ 20mA Angle [1]

Min. Typ.

450

2θ1/2

120

°

AA4040SESK Super Bright Orange (AlGaInP) Water Clear 200

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.

2. Luminous intensity/ luminous Flux: +/-15%.

Electrical / Optical Characteristics at TA=25°C

Symbol

λpeak

λD [1]

Δλ1/2

C

V

F

[2]

I

R

Parameter

Peak Wavelength

Dominant Wavelength

Spectral Line Half-width

Capacitance

Forward Voltage

Reverse Current

Device

Super Bright Orange

Super Bright Orange

Super Bright Orange

Super Bright Orange

Super Bright Orange

Super Bright Orange

Typ.

610

601

29

15

2.1

Max.

2.5

10

Units

nm

nm

nm

pF

V

uA

Test Conditions

I

F

=20mA

I

F

=20mA

I

F

=20mA

V

F

=0V;f=1MHz

I

F

=20mA

V

R

=5V

Notes:

ngth: +/-1nm.

2. Forward Voltage: +/-0.1V.

Absolute Maximum Ratings at TA=25°C

Parameter

Power dissipation

DC Forward Current

Peak Forward Current [1]

Reverse Voltage

Operating Temperature

Storage Temperature

Note:

1. 1/10 Duty Cycle, 0.1ms Pulse Width.

Super Bright Orange

75

30

195

5

-40°C To +85°C

-40°C To +85°C

Units

mW

mA

mA

V

SPEC NO: DSAL0883 REV NO: V.3 DATE: APR/13/2011 PAGE: 3 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: ERP: 1201006829

芯天下--/

Super Bright Orange AA4040SESK

SPEC NO: DSAL0883 REV NO: V.3 DATE: APR/13/2011 PAGE: 4 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: ERP: 1201006829

芯天下--/

AA4040SESK

Reflow soldering is recommended and the soldering profile is shown below.

Other soldering methods are not recommended as they might cause damage to the product.

Recommended Soldering Pattern

(Units : mm; Tolerance: ± 0.1)

Reel Dimension

Tape Dimensions

(Units : mm)

SPEC NO: DSAL0883 REV NO: V.3 DATE: APR/13/2011 PAGE: 5 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: ERP: 1201006829

芯天下--/

PACKING & LABEL SPECIFICATIONS AA4040SESK

SPEC NO: DSAL0883 REV NO: V.3 DATE: APR/13/2011 PAGE: 6 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: ERP: 1201006829

芯天下--/

2024年9月29日发(作者：朱绮烟)

4.0x4.0mm RIGHT ANGLE SURFACE MOUNT

LED LAMP

Part Number: AA4040SESK Super Bright Orange

Features

zSingle color.

zSuitable for all SMT assembly and solder process.

zAvailable on tape and reel.

zIdeal for backlighting.

zPackage : 500pcs / reel.

zMoisture sensitivity level : level 3.

zRoHS compliant.

Description

The Super Bright Orange device is made with AlGaInP (on

GaAs substrate) light emitting diode chip.

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

4. The device has a single mounting surface. The device must be mounted according to the specifications.

SPEC NO: DSAL0883 REV NO: V.3 DATE: APR/13/2011 PAGE: 1 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: ERP: 1201006829

芯天下--/

Handling Precautions

Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic

significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.

As a result, special handling precautions need to be observed during assembly using silicone encapsulated

LED products. Failure to comply might lead to damage and premature failure of the LED.

1. Handle the component along the side surfaces by using forceps or appropriate tools.

2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.

3. As silicone encapsulation is permeable to gases, some corrosive substances such as H

2

S might corrode silver plating of

leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.

SPEC NO: DSAL0883 REV NO: V.3 DATE: APR/13/2011 PAGE: 2 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: ERP: 1201006829

芯天下--/

Selection Guide

Part No. Dice Lens Type

Viewing Iv (mcd) [2]

@ 20mA Angle [1]

Min. Typ.

450

2θ1/2

120

°

AA4040SESK Super Bright Orange (AlGaInP) Water Clear 200

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.

2. Luminous intensity/ luminous Flux: +/-15%.

Electrical / Optical Characteristics at TA=25°C

Symbol

λpeak

λD [1]

Δλ1/2

C

V

F

[2]

I

R

Parameter

Peak Wavelength

Dominant Wavelength

Spectral Line Half-width

Capacitance

Forward Voltage

Reverse Current

Device

Super Bright Orange

Super Bright Orange

Super Bright Orange

Super Bright Orange

Super Bright Orange

Super Bright Orange

Typ.

610

601

29

15

2.1

Max.

2.5

10

Units

nm

nm

nm

pF

V

uA

Test Conditions

I

F

=20mA

I

F

=20mA

I

F

=20mA

V

F

=0V;f=1MHz

I

F

=20mA

V

R

=5V

Notes:

ngth: +/-1nm.

2. Forward Voltage: +/-0.1V.

Absolute Maximum Ratings at TA=25°C

Parameter

Power dissipation

DC Forward Current

Peak Forward Current [1]

Reverse Voltage

Operating Temperature

Storage Temperature

Note:

1. 1/10 Duty Cycle, 0.1ms Pulse Width.

Super Bright Orange

75

30

195

5

-40°C To +85°C

-40°C To +85°C

Units

mW

mA

mA

V

SPEC NO: DSAL0883 REV NO: V.3 DATE: APR/13/2011 PAGE: 3 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: ERP: 1201006829

芯天下--/

Super Bright Orange AA4040SESK

SPEC NO: DSAL0883 REV NO: V.3 DATE: APR/13/2011 PAGE: 4 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: ERP: 1201006829

芯天下--/

AA4040SESK

Reflow soldering is recommended and the soldering profile is shown below.

Other soldering methods are not recommended as they might cause damage to the product.

Recommended Soldering Pattern

(Units : mm; Tolerance: ± 0.1)

Reel Dimension

Tape Dimensions

(Units : mm)

SPEC NO: DSAL0883 REV NO: V.3 DATE: APR/13/2011 PAGE: 5 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: ERP: 1201006829

芯天下--/

PACKING & LABEL SPECIFICATIONS AA4040SESK

SPEC NO: DSAL0883 REV NO: V.3 DATE: APR/13/2011 PAGE: 6 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: ERP: 1201006829

芯天下--/