2024年10月9日发(作者：恽慧心)
CATALOG NUMBER
RBT18911A
FEATURES
Designed to connect vertical reinforcing bars and angular reinforcing bars greater than 45 degrees
Used to splice the same diameter bars
Works with saw cut, flame cut and sheared bars
Can be visually inspected after installation
Available with extended sleeve lengths
PRODUCT ATTRIBUTES
Material: Steel
Finish: Plain
100% U.S. Domestic Content: Yes
Sleeve: Extended Length
Rebar Size, Metric: 57 mm
Rebar Size, US: #18
Rebar Size, Canada: 55M
Diameter 1: 95 mm
Diameter 2: 67 mm
Length 1: 254 mm
Length 2: 127 mm
Unit Weight: 7.24 kg
Designed to Meet: AASHTO; ABNT NBR 8548:1984; ACI 318 Type 1 (125% Specified Yield); ACI 318 Type 2 (Specified Tensile);
ACI 349; ACI 359; AS3600; CAN/CSA - N287.2/.3/.4; IBC Type 1 (125% Specified Yield); IBC Type 2 (Specified Tensile); US Army
Corps of Engineers; CAN/CSA - A23.3
ADDITIONAL PRODUCT DETAILS
Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON
Cadweld Rebar Splicing System Instruction Manual.
Sizes not shown may be available by special order. Contact your nVent LENTON representative for more information.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials.
Instruction sheets are available at and from your nVent customer service representative. Improper installation,
misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction,
property damage, serious bodily injury and death and/or void your warranty.
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
Europe
Netherlands:
+31 800-0200135
France:
+33 800 901 793
Europe
Germany:
800 1890272
Other Countries:
+31 13 5835404
APAC
Shanghai:
+ 86 21 2412 1618/19
Sydney:
+61 2 9751 8500
CADDY
ERICO
HOFFMAN
RAYCHEM
SCHROFF
TRACER
2
2024年10月9日发(作者：恽慧心)
CATALOG NUMBER
RBT18911A
FEATURES
Designed to connect vertical reinforcing bars and angular reinforcing bars greater than 45 degrees
Used to splice the same diameter bars
Works with saw cut, flame cut and sheared bars
Can be visually inspected after installation
Available with extended sleeve lengths
PRODUCT ATTRIBUTES
Material: Steel
Finish: Plain
100% U.S. Domestic Content: Yes
Sleeve: Extended Length
Rebar Size, Metric: 57 mm
Rebar Size, US: #18
Rebar Size, Canada: 55M
Diameter 1: 95 mm
Diameter 2: 67 mm
Length 1: 254 mm
Length 2: 127 mm
Unit Weight: 7.24 kg
Designed to Meet: AASHTO; ABNT NBR 8548:1984; ACI 318 Type 1 (125% Specified Yield); ACI 318 Type 2 (Specified Tensile);
ACI 349; ACI 359; AS3600; CAN/CSA - N287.2/.3/.4; IBC Type 1 (125% Specified Yield); IBC Type 2 (Specified Tensile); US Army
Corps of Engineers; CAN/CSA - A23.3
ADDITIONAL PRODUCT DETAILS
Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON
Cadweld Rebar Splicing System Instruction Manual.
Sizes not shown may be available by special order. Contact your nVent LENTON representative for more information.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials.
Instruction sheets are available at and from your nVent customer service representative. Improper installation,
misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction,
property damage, serious bodily injury and death and/or void your warranty.
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
Europe
Netherlands:
+31 800-0200135
France:
+33 800 901 793
Europe
Germany:
800 1890272
Other Countries:
+31 13 5835404
APAC
Shanghai:
+ 86 21 2412 1618/19
Sydney:
+61 2 9751 8500
CADDY
ERICO
HOFFMAN
RAYCHEM
SCHROFF
TRACER
2