2024年10月25日发(作者：庞孤晴)
FACT SHEET
SJA1110
SJA1110 TSN ETHERNET SWITCH
The SJA1110 automotive Ethernet switch
family offers innovative and dedicated safety
and security features designed for optimal
integration in auto ECUs. The four switch
variants enable modular ECU design and
platforms and support different automotive
applications such as gateways, ADAS boxes,
and infotainment ECUs.
KEY FEATURES
• Integrated 100BASE-T1 and 100BASE-TX PHYs
• Integrated Arm
®
Cortex
®
-M7 based core
• Best-in class packet inspection and DoS prevention
capabilities
• Advanced secure boot capabilities
• Purpose built functional safety features
• Support for Wake-over-Ethernet (OPEN TC10)
• Rich set of Time-Sensitive Networking (TSN) standards
• Rich set of NXP original AVB and AUTOSAR
®
software
• System solution with S32G Vehicle Networking Processor
and VR5510 power management unit
SJA1110 ETHERNET SWITCH BLOCK DIAGRAM
Arm Cortex-M7
MII
RMII
RGMII
SGMII
Multi-Gig SGMII
Advanced
Secure Boot
GPIO
QSPI
SPI
JTAG
WDOG
IRQ
100BASE-TX
SJA1110
AVB/TSN
Non-Blocking
Switch Core
SMI
ENABLEMENT
• Production-grade Software Development Kit (SDK)
• Native integration with NXP Design Studio IDE
• Production grade AUTOSAR drivers
• Production grade AVB/802.1AS synchronization protocol
middleware
• Evaluation board compatible with NXP’s Smart Application
Blueprint for Rapid Engineering (SABRE)
• Linux
®
Drivers
100BASE-T1
PHYs
TCAM
TC10 Wake Up
Functional
Safety
NETWORKING APPLICATIONS
• Optimized NXP chipset solution with
S32G processor enables unmatched
routing, firewalling, intrusion/
detection/prevention capabilities
• Best-in-class TCAM-based frame
inspection for IDPS support, DOS
prevention and advanced frames
management
• BOM optimization features include
compatibility with VR5510 PMIC,
four pin-compatible variants and
optimized cascaded configuration
MII
RMII
RGMII
SGMII
Multi-Gig SGMII
Arm Cortex-M7
Advanced
Secure Boot
GPIO
QSPI
SPI
JTAG
WDOG
IRQ
S32G
P
F
E
100BASE-TX
SJA1110
AVB/TSN
Non-Blocking
Switch Core
SMI
100BASE-T1
PHYs
TCAM
TC10 Wake Up
Functional
Safety
VR5510 (PMIC)
Power to S32G + (up to 2x) SJA1110x
ADAS APPLICATIONS
• Functional safety-dedicated features
improving ECU safety design
• Safety manual enable optimized
safety design up to ASIL-D ECUs
• Automotive Grade 1 (-40 / +125° C)
capability for optimized PCB design
• High-SGMII count for EMC friendly
design
• Production-grade AUTOSAR drivers
MCU
S32G/
S32V
Arm Cortex-M7
MII
RMII
RGMII
SGMII
Multi-Gig SGMII
Advanced
Secure Boot
GPIO
QSPI
SPI
JTAG
WDOG
IRQ
MCU
100BASE-TX
MCU
100BASE-T1
PHYs
SJA1110
AVB/TSN
Non-Blocking
Switch Core
SMI
TCAM
TC10 Wake Up
Functional
Safety
• Compatible with TTTEch
®
MotionWise
®
middleware
INFOTAINMENT/CLUSTER
APPLICATIONS
• Multi-gigabit SGMII for external
Gigabit and Multi-Gigabit PHYs
• Autonomous operation support avoids
dependency from untrusted external
host
• Avnu-Certified* AVB/gPTP stack for
integrated controller
®
Arm Cortex-M7
MII
RMII
RGMII
SGMII
Multi-Gig SGMII
Advanced
Secure Boot
GPIO
QSPI
SPI
JTAG
WDOG
IRQ
100BASE-TX
Multi-Gigabit PHY
100BASE-T1
PHYs
Multi-Gigabit PHY
SJA1110
AVB/TSN
Non-Blocking
Switch Core
SMI
• Support for Wake over Ethernet
(OPEN TC10)
• Integrated controller with
programmable GPIOs
TCAM
TC10 Wake Up
Functional
Safety
/SJA1110
NXP and the NXP logo are trademarks of NXP B.V. All other product or service names are the property of their respective owners. Arm and Cortex are
trademarks or registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere. The related technology may be protected by any or
all of patents, copyrights, designs and trade secrets. All rights reserved. © 2022 NXP B.V.
Document Number: SJA1110AUTESFS REV 1
2024年10月25日发(作者：庞孤晴)
FACT SHEET
SJA1110
SJA1110 TSN ETHERNET SWITCH
The SJA1110 automotive Ethernet switch
family offers innovative and dedicated safety
and security features designed for optimal
integration in auto ECUs. The four switch
variants enable modular ECU design and
platforms and support different automotive
applications such as gateways, ADAS boxes,
and infotainment ECUs.
KEY FEATURES
• Integrated 100BASE-T1 and 100BASE-TX PHYs
• Integrated Arm
®
Cortex
®
-M7 based core
• Best-in class packet inspection and DoS prevention
capabilities
• Advanced secure boot capabilities
• Purpose built functional safety features
• Support for Wake-over-Ethernet (OPEN TC10)
• Rich set of Time-Sensitive Networking (TSN) standards
• Rich set of NXP original AVB and AUTOSAR
®
software
• System solution with S32G Vehicle Networking Processor
and VR5510 power management unit
SJA1110 ETHERNET SWITCH BLOCK DIAGRAM
Arm Cortex-M7
MII
RMII
RGMII
SGMII
Multi-Gig SGMII
Advanced
Secure Boot
GPIO
QSPI
SPI
JTAG
WDOG
IRQ
100BASE-TX
SJA1110
AVB/TSN
Non-Blocking
Switch Core
SMI
ENABLEMENT
• Production-grade Software Development Kit (SDK)
• Native integration with NXP Design Studio IDE
• Production grade AUTOSAR drivers
• Production grade AVB/802.1AS synchronization protocol
middleware
• Evaluation board compatible with NXP’s Smart Application
Blueprint for Rapid Engineering (SABRE)
• Linux
®
Drivers
100BASE-T1
PHYs
TCAM
TC10 Wake Up
Functional
Safety
NETWORKING APPLICATIONS
• Optimized NXP chipset solution with
S32G processor enables unmatched
routing, firewalling, intrusion/
detection/prevention capabilities
• Best-in-class TCAM-based frame
inspection for IDPS support, DOS
prevention and advanced frames
management
• BOM optimization features include
compatibility with VR5510 PMIC,
four pin-compatible variants and
optimized cascaded configuration
MII
RMII
RGMII
SGMII
Multi-Gig SGMII
Arm Cortex-M7
Advanced
Secure Boot
GPIO
QSPI
SPI
JTAG
WDOG
IRQ
S32G
P
F
E
100BASE-TX
SJA1110
AVB/TSN
Non-Blocking
Switch Core
SMI
100BASE-T1
PHYs
TCAM
TC10 Wake Up
Functional
Safety
VR5510 (PMIC)
Power to S32G + (up to 2x) SJA1110x
ADAS APPLICATIONS
• Functional safety-dedicated features
improving ECU safety design
• Safety manual enable optimized
safety design up to ASIL-D ECUs
• Automotive Grade 1 (-40 / +125° C)
capability for optimized PCB design
• High-SGMII count for EMC friendly
design
• Production-grade AUTOSAR drivers
MCU
S32G/
S32V
Arm Cortex-M7
MII
RMII
RGMII
SGMII
Multi-Gig SGMII
Advanced
Secure Boot
GPIO
QSPI
SPI
JTAG
WDOG
IRQ
MCU
100BASE-TX
MCU
100BASE-T1
PHYs
SJA1110
AVB/TSN
Non-Blocking
Switch Core
SMI
TCAM
TC10 Wake Up
Functional
Safety
• Compatible with TTTEch
®
MotionWise
®
middleware
INFOTAINMENT/CLUSTER
APPLICATIONS
• Multi-gigabit SGMII for external
Gigabit and Multi-Gigabit PHYs
• Autonomous operation support avoids
dependency from untrusted external
host
• Avnu-Certified* AVB/gPTP stack for
integrated controller
®
Arm Cortex-M7
MII
RMII
RGMII
SGMII
Multi-Gig SGMII
Advanced
Secure Boot
GPIO
QSPI
SPI
JTAG
WDOG
IRQ
100BASE-TX
Multi-Gigabit PHY
100BASE-T1
PHYs
Multi-Gigabit PHY
SJA1110
AVB/TSN
Non-Blocking
Switch Core
SMI
• Support for Wake over Ethernet
(OPEN TC10)
• Integrated controller with
programmable GPIOs
TCAM
TC10 Wake Up
Functional
Safety
/SJA1110
NXP and the NXP logo are trademarks of NXP B.V. All other product or service names are the property of their respective owners. Arm and Cortex are
trademarks or registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere. The related technology may be protected by any or
all of patents, copyrights, designs and trade secrets. All rights reserved. © 2022 NXP B.V.
Document Number: SJA1110AUTESFS REV 1