2024年4月15日发(作者：锺离天纵)
OBSOLETE
Data Sheet No. PD10053 revI
Series PVD33N & PbF
Microelectronic Power IC
HEXFET
®
Power MOSFET Photovoltaic Relay
Single-Pole, Normally-Open
0-300V DC, 240mA
General Description
The PVD33 Series DC Relay (PVD) is a single-pole,
normally open, solid-state replacement for
electromechanical relays used for general purpose
switching of analog signals. It utilizes International
Rectifier’s HEXFET power MOSFET as the output
switch, driven by an integrated circuit photovoltaic
generator of novel construction. The output switch is
controlled by radiation from a GaAlAs light emitting
diode (LED), which is optically isolated from the
photovoltaic generator.
The PVD33 Series overcomes the limitations of both
conventional electromechanical and reed relays by
offering the solid state advantages of long life, fast
operating speed, low pick up power, bounce-free
operation, low thermal offset voltages and miniature
package. These advantages allow product
improvement and design innovations in many
applications such as process control, multiplexing,
automatic test equipment and data acquisition.
The PVD33 can switch analog signals from
thermocouple level to 300 Volts peak DC. Signal
frequencies into the RF range are easily controlled
and switching rates up to 500Hz are achievable. The
extremely small thermally generated offset voltages
allow increased measurement accuracies.
These relays are packaged in 8-pin, molded DIP
packages and available with either thru-hole or
surface-mount (“gull-wing”) leads, in plastic shipping
tubes.
Features
§ Bounce-Free Operation
§10
10
Off-State Resistance
§1,000 V/µsec dv/dt
§5 mA Input Sensitivity
§4,000 V
RMS
I/O Isolation
§Solid-State Reliability
§UL Recognized
§ESD Tolerance:
4000V Human Body Model
500V Machine Model
Applications
§
§
§
§
Process Control
Data Acquisition
Test Equipment
Multiplexing and Scanning
Part Identification
PVD2352N & PbF
PVD3354N & PbF
thru-hole
PVD2352NS & PbF
PVD3354NS & PbF
surface-mount
(gull-wing)
(HEXFET is the registered trademark for International Rectifier Power MOSFETs)
1
Series PVD33N & PbF
Electrical Specifications (-40°C ≤ T
A
≤ +85°C unless otherwise specified)
INPUT CHARACTERISTICS
Minimum Control Current (see figures 1 and 2)
For 250mA Continuous Load Current
For 240mA Continuous Load Current
For 200mA Continuous Load Current
Maximum Control Current for Off-State Resistance at 25°C
Control Current Range (Caution: current limit input LED. See figure 6)
Maximum Reverse Voltage
PVD2352N
2
5
5
10
PVD3354NUnits
DC
mA@25°C
mA@40°C
mA@85°C
µA(DC)
mA(DC)
V(DC)
2.0 to 25
6.0
OUTPUT CHARACTERISTICS
Operating Voltage Range
Maxiumum Load Current 40°C I LED 5mA
Response Time @25°C (see figures 7 and 8)
Max. T
(on)
@ 12mA Control, 50 mA Load, 100 VDC
Max. T
(off)
@ 12mA Control, 50 mA Load, 100 VDC
Max. On-state Resistance 25°C
(Pulsed) (fig. 4) 50 mA Load, 5mA Control
Min. Off-state Resistance 25°C (see figure 5)
Max. Thermal Offset Voltage @ 5.0mA Control
Min. Off-State dv/dt
Typical Output Capacitance (see figure 9)
PVD2352N
200
240
100
110
6
10
8
@ 160VDC
0.2
1000
10
PVD3354N
300
Units
V
(peak)
mA
(DC)
µs
µs
Ω
Ω
µvolts
V/µs
pF @ 50VDC
10
10
@ 240VDC
GENERAL CHARACTERISTICS
Dielectric Strength: Input-Output
Insulation Resistance: Input-Output @ 90V
DC
Maximum Capacitance: Input-Output
Max. Pin Soldering Temperature (1.6mm below seating plane, 10 seconds max.)
Ambient Temperature Range:Operating
Storage
(PVD2352N and PVD3354N)
4000
10
12
@ 25°C - 50% RH
1.0
+260
-40 to +85
-40 to +100
Units
V
RMS
Ω
pF
°C
International Rectifier does not recommend the use of this product in aerospace, avionics, military or life support applications.
Users of this International Rectifier product in such applications assume all risks of such use and indemnify International
Rectifier against all damages resulting from such use.
2
2024年4月15日发(作者：锺离天纵)
OBSOLETE
Data Sheet No. PD10053 revI
Series PVD33N & PbF
Microelectronic Power IC
HEXFET
®
Power MOSFET Photovoltaic Relay
Single-Pole, Normally-Open
0-300V DC, 240mA
General Description
The PVD33 Series DC Relay (PVD) is a single-pole,
normally open, solid-state replacement for
electromechanical relays used for general purpose
switching of analog signals. It utilizes International
Rectifier’s HEXFET power MOSFET as the output
switch, driven by an integrated circuit photovoltaic
generator of novel construction. The output switch is
controlled by radiation from a GaAlAs light emitting
diode (LED), which is optically isolated from the
photovoltaic generator.
The PVD33 Series overcomes the limitations of both
conventional electromechanical and reed relays by
offering the solid state advantages of long life, fast
operating speed, low pick up power, bounce-free
operation, low thermal offset voltages and miniature
package. These advantages allow product
improvement and design innovations in many
applications such as process control, multiplexing,
automatic test equipment and data acquisition.
The PVD33 can switch analog signals from
thermocouple level to 300 Volts peak DC. Signal
frequencies into the RF range are easily controlled
and switching rates up to 500Hz are achievable. The
extremely small thermally generated offset voltages
allow increased measurement accuracies.
These relays are packaged in 8-pin, molded DIP
packages and available with either thru-hole or
surface-mount (“gull-wing”) leads, in plastic shipping
tubes.
Features
§ Bounce-Free Operation
§10
10
Off-State Resistance
§1,000 V/µsec dv/dt
§5 mA Input Sensitivity
§4,000 V
RMS
I/O Isolation
§Solid-State Reliability
§UL Recognized
§ESD Tolerance:
4000V Human Body Model
500V Machine Model
Applications
§
§
§
§
Process Control
Data Acquisition
Test Equipment
Multiplexing and Scanning
Part Identification
PVD2352N & PbF
PVD3354N & PbF
thru-hole
PVD2352NS & PbF
PVD3354NS & PbF
surface-mount
(gull-wing)
(HEXFET is the registered trademark for International Rectifier Power MOSFETs)
1
Series PVD33N & PbF
Electrical Specifications (-40°C ≤ T
A
≤ +85°C unless otherwise specified)
INPUT CHARACTERISTICS
Minimum Control Current (see figures 1 and 2)
For 250mA Continuous Load Current
For 240mA Continuous Load Current
For 200mA Continuous Load Current
Maximum Control Current for Off-State Resistance at 25°C
Control Current Range (Caution: current limit input LED. See figure 6)
Maximum Reverse Voltage
PVD2352N
2
5
5
10
PVD3354NUnits
DC
mA@25°C
mA@40°C
mA@85°C
µA(DC)
mA(DC)
V(DC)
2.0 to 25
6.0
OUTPUT CHARACTERISTICS
Operating Voltage Range
Maxiumum Load Current 40°C I LED 5mA
Response Time @25°C (see figures 7 and 8)
Max. T
(on)
@ 12mA Control, 50 mA Load, 100 VDC
Max. T
(off)
@ 12mA Control, 50 mA Load, 100 VDC
Max. On-state Resistance 25°C
(Pulsed) (fig. 4) 50 mA Load, 5mA Control
Min. Off-state Resistance 25°C (see figure 5)
Max. Thermal Offset Voltage @ 5.0mA Control
Min. Off-State dv/dt
Typical Output Capacitance (see figure 9)
PVD2352N
200
240
100
110
6
10
8
@ 160VDC
0.2
1000
10
PVD3354N
300
Units
V
(peak)
mA
(DC)
µs
µs
Ω
Ω
µvolts
V/µs
pF @ 50VDC
10
10
@ 240VDC
GENERAL CHARACTERISTICS
Dielectric Strength: Input-Output
Insulation Resistance: Input-Output @ 90V
DC
Maximum Capacitance: Input-Output
Max. Pin Soldering Temperature (1.6mm below seating plane, 10 seconds max.)
Ambient Temperature Range:Operating
Storage
(PVD2352N and PVD3354N)
4000
10
12
@ 25°C - 50% RH
1.0
+260
-40 to +85
-40 to +100
Units
V
RMS
Ω
pF
°C
International Rectifier does not recommend the use of this product in aerospace, avionics, military or life support applications.
Users of this International Rectifier product in such applications assume all risks of such use and indemnify International
Rectifier against all damages resulting from such use.
2