2024年5月8日发(作者：说名)
SD Series Intelligent Sensor
SD Series Sensor Meter User Manual
Features:
1.
Dual LED display output:
2.
Two alarm output;
3.
TC / RTD / Analog signal universal input;
4.
Special linear signal input can
be ordered
For your safety, please read follow content carefully before you use our meter!
Safety Caution
*
Please read the manual carefully before you use the meter
Please comply with following inportant points:
WARNING:
An accident may happen if the operation does
not comply with the instruction
NOTICE: An operation that does not comply with the instruction may lead to product damage
The instruction of the symbol in the manual is as follow.
An accident or danger may happen in a special condition.
Warning
1. A safty protection equipment must be installed or please contact with us for the relative information if the
product is used under the circumstance such as nuclear control, medical treatment equipment, automobile,
train, airplane, aviation and equipment etc.. Otherwise, it may cause serious loss, fire or person injury.
2. A panel must be installed, otherwise it may cause creepage (leakage).
3. Do not touch wire connectors when the power is on, otherwise you may get an electric shock.
4. Do not dismantle or modify the product. If you have to do so, please contact with us first. Otherwise it may
cause electric shock and fire.
5. Please check the connection number while you connect the power supply wire or input signal, in case
cause fire.
Caution
1. This product cannot be used outdoors. Otherwise the working life of the product will become shorter, or an electric
shock accident may happen.
2. When you connect wire to the power input connectors or signal input connectors, the moment of the No.20 AWG
(0.50 mm2) screw tweaked to the connector is 0.74n.m - Otherwise the connectors may be damaged or get fire.
3. Please comply with the rated specification. Otherwise it may cause electric shock or fire, and damage the product.
4. Do not use water or oil base cleaner to clean the product. Otherwise it may cause electric shock or fire and damage the
product.
5. This product should be avoid working under the circumstance that is flammable, explosive, moist, under sunshine, heat
radiation and vibration. Otherwise it may cause explosion.
6. In this unit it must not have dust or deposit, otherwise it may cause fire or mechanical malfunction.
7. Do not use gasoline, chemical solvent to clean the cover of the product because such solvent can damage it. Please use
some soft cloth with water or alcohol to clean the plastic cover.
2
SD
□
□
□
□
□
□
Input signal: mV: 0-50mV mA:4-20mA V: 0-10V R: 0-400
Ω
Signal input:
10˖One signal input (at one time)
Alarm function:
B: One alarm
C˖Two alarm
Null: No alarm
Output function: R:Relay alarm
A: No alarm
Display: D: Big LED display N: Normal LED display
Size:
4˖48W×48H 6˖48W×96H 7˖72W×72H 8˖96W×48H 9˖96W×96H
KKSD101-A/4--1
Description
Model
SD□-RC10-mV
SD□-RC10-V
SD□-RC10-mA
SD□-RC10-R
Alarm function
Two Relay Output Capacity
Two Relay Output Capacity
Two Relay Output Capacity
Two Relay Output Capacity
Input
0̚50mV
0̚10V
4̚20mA
0̚400Ω
Technical Parameters
mV
0-50mV (0-20mV can be orderde)
Input signal
Alarm output
Power supply
Total current
Ambient temperature
Ambient humidity
0-10V(0-5V, 1-5V, 1-10V can be ordered)
mA
4-20mA (0-20mA can be ordered)
R
0-400Ω
Relay output: capacity: 1A/250V AC
SD6/7/8/9: AC 110/220V±10% SD4: AC/DC 100-240V
˘30mA(AC 220V)
0-50
ć
45-85%RH
V
Indication
6'
2024年5月8日发(作者：说名)
SD Series Intelligent Sensor
SD Series Sensor Meter User Manual
Features:
1.
Dual LED display output:
2.
Two alarm output;
3.
TC / RTD / Analog signal universal input;
4.
Special linear signal input can
be ordered
For your safety, please read follow content carefully before you use our meter!
Safety Caution
*
Please read the manual carefully before you use the meter
Please comply with following inportant points:
WARNING:
An accident may happen if the operation does
not comply with the instruction
NOTICE: An operation that does not comply with the instruction may lead to product damage
The instruction of the symbol in the manual is as follow.
An accident or danger may happen in a special condition.
Warning
1. A safty protection equipment must be installed or please contact with us for the relative information if the
product is used under the circumstance such as nuclear control, medical treatment equipment, automobile,
train, airplane, aviation and equipment etc.. Otherwise, it may cause serious loss, fire or person injury.
2. A panel must be installed, otherwise it may cause creepage (leakage).
3. Do not touch wire connectors when the power is on, otherwise you may get an electric shock.
4. Do not dismantle or modify the product. If you have to do so, please contact with us first. Otherwise it may
cause electric shock and fire.
5. Please check the connection number while you connect the power supply wire or input signal, in case
cause fire.
Caution
1. This product cannot be used outdoors. Otherwise the working life of the product will become shorter, or an electric
shock accident may happen.
2. When you connect wire to the power input connectors or signal input connectors, the moment of the No.20 AWG
(0.50 mm2) screw tweaked to the connector is 0.74n.m - Otherwise the connectors may be damaged or get fire.
3. Please comply with the rated specification. Otherwise it may cause electric shock or fire, and damage the product.
4. Do not use water or oil base cleaner to clean the product. Otherwise it may cause electric shock or fire and damage the
product.
5. This product should be avoid working under the circumstance that is flammable, explosive, moist, under sunshine, heat
radiation and vibration. Otherwise it may cause explosion.
6. In this unit it must not have dust or deposit, otherwise it may cause fire or mechanical malfunction.
7. Do not use gasoline, chemical solvent to clean the cover of the product because such solvent can damage it. Please use
some soft cloth with water or alcohol to clean the plastic cover.
2
SD
□
□
□
□
□
□
Input signal: mV: 0-50mV mA:4-20mA V: 0-10V R: 0-400
Ω
Signal input:
10˖One signal input (at one time)
Alarm function:
B: One alarm
C˖Two alarm
Null: No alarm
Output function: R:Relay alarm
A: No alarm
Display: D: Big LED display N: Normal LED display
Size:
4˖48W×48H 6˖48W×96H 7˖72W×72H 8˖96W×48H 9˖96W×96H
KKSD101-A/4--1
Description
Model
SD□-RC10-mV
SD□-RC10-V
SD□-RC10-mA
SD□-RC10-R
Alarm function
Two Relay Output Capacity
Two Relay Output Capacity
Two Relay Output Capacity
Two Relay Output Capacity
Input
0̚50mV
0̚10V
4̚20mA
0̚400Ω
Technical Parameters
mV
0-50mV (0-20mV can be orderde)
Input signal
Alarm output
Power supply
Total current
Ambient temperature
Ambient humidity
0-10V(0-5V, 1-5V, 1-10V can be ordered)
mA
4-20mA (0-20mA can be ordered)
R
0-400Ω
Relay output: capacity: 1A/250V AC
SD6/7/8/9: AC 110/220V±10% SD4: AC/DC 100-240V
˘30mA(AC 220V)
0-50
ć
45-85%RH
V
Indication
6'