2024年5月19日发(作者：容月桃)
H. Electric theory:
3
Operation manual to
the Popcorn machine
A. Function and features:
The popcorn machine combines all the advantages of the popcorn machines both in and abroad.
It is made of aluminum alloy and toughened glass, with a sprayed inattentive interior coat. The
machine also has the features of cleanliness and sanitation, easy cleaning, simple and safe operation
and saving energy, which is fit for restaurants, snack bars, cinemas and so on.
B. Specifications:
MODEL HP-6B
Power (V) 220V~ Casing Size (mm) 560x420x760
Output (kW) 1.44 Oil Dosage (ml/once) 50
Frequency (Hz) 50/60 Sugar Dosage (g/once) 100
Temperature (℃) 220~270 Corn Dosage (g/once) 150
Formal Size (mm) 520x450x650 Efficiency (pan/min) 1/2
C. Transportation and Storage:
When being transported, be careful not to shake the machine violently; don’t put it outdoors or
in the direct sunlight. If so, avoid rainfall; Store it in ventilated places out of erosive gases; Don’t put it
up-side-down.
D. Cautions:
1. The machine should be laid up flat and stable.
2. The machine must be used together with the suitable power source suggested by the factory, that
power+10%(V).
3. Suitable switch, fuse box and the leak electricity switch should be fixed near the machine,
without piled up rubbish to make it convenient to operate.
4. The ground wire and the power source wire should come from the same place, connected with a
safe three-pin plug in the outlet.
5. All the connection with electricity should be done by the qualified electrician.
E. Operation
1. Turn on the switch of heat preservation to start the heat tube and light.
1
2. Turn the heating knob to preheat the plate for 5~6 minutes.
3. Put 50ml oil, 150g corn and100g sugar into the plate, and the corn will burst open.
4. Pay attention to the corn while popping in case it will be burnt. Close the door firmly so that the
corn can not come out.
5. Stir the corn until it is all burst open, then pour it out from the plate.
6. Repeat 1~5 to make more popcorn. It needs only 2 minutes to pop the corn continuously.
7. Do not drop any oil around the plate. Otherwise it will catch fire when it is heated to a certain
temperature.
Warning: Do not add any water to the plate while it is popping!
F. Cleanliness and Protection:
1. Cut off the electricity power and pull out the plug to avoid accidents when you clean the machine.
2. Use the wet towel with some anticorrosive detergent to clean the outside parts of the machine. Do
not clean the machine directly with water. Otherwise the electric function will be damaged.
3. If it is not used for a long time, you should cut off the electricity and pull out the plug.
4. Do not brush the inside part of the plate with hard metal. Otherwise you will damage the coat.
G. Troubleshooting guides:
Sequence Problem Causes Possible remedies
1 Light not on Not plugged in outlet 1. fasten the screw of connecting the
wires
2. change the light bulb
2 Can not heat 1. loose in wire of the 1. fasten the screw from which the
heated tube wires come out.
2. heated tube burnt 2. change the heated tube.
3. broken electric 3. change the electric capacity
capacity
3 Too high or too Broken thermostat Change the thermostat
low temperature
Appendix to the machine: 1. an operation manual
2. a bulb
2
2024年5月19日发(作者：容月桃)
H. Electric theory:
3
Operation manual to
the Popcorn machine
A. Function and features:
The popcorn machine combines all the advantages of the popcorn machines both in and abroad.
It is made of aluminum alloy and toughened glass, with a sprayed inattentive interior coat. The
machine also has the features of cleanliness and sanitation, easy cleaning, simple and safe operation
and saving energy, which is fit for restaurants, snack bars, cinemas and so on.
B. Specifications:
MODEL HP-6B
Power (V) 220V~ Casing Size (mm) 560x420x760
Output (kW) 1.44 Oil Dosage (ml/once) 50
Frequency (Hz) 50/60 Sugar Dosage (g/once) 100
Temperature (℃) 220~270 Corn Dosage (g/once) 150
Formal Size (mm) 520x450x650 Efficiency (pan/min) 1/2
C. Transportation and Storage:
When being transported, be careful not to shake the machine violently; don’t put it outdoors or
in the direct sunlight. If so, avoid rainfall; Store it in ventilated places out of erosive gases; Don’t put it
up-side-down.
D. Cautions:
1. The machine should be laid up flat and stable.
2. The machine must be used together with the suitable power source suggested by the factory, that
power+10%(V).
3. Suitable switch, fuse box and the leak electricity switch should be fixed near the machine,
without piled up rubbish to make it convenient to operate.
4. The ground wire and the power source wire should come from the same place, connected with a
safe three-pin plug in the outlet.
5. All the connection with electricity should be done by the qualified electrician.
E. Operation
1. Turn on the switch of heat preservation to start the heat tube and light.
1
2. Turn the heating knob to preheat the plate for 5~6 minutes.
3. Put 50ml oil, 150g corn and100g sugar into the plate, and the corn will burst open.
4. Pay attention to the corn while popping in case it will be burnt. Close the door firmly so that the
corn can not come out.
5. Stir the corn until it is all burst open, then pour it out from the plate.
6. Repeat 1~5 to make more popcorn. It needs only 2 minutes to pop the corn continuously.
7. Do not drop any oil around the plate. Otherwise it will catch fire when it is heated to a certain
temperature.
Warning: Do not add any water to the plate while it is popping!
F. Cleanliness and Protection:
1. Cut off the electricity power and pull out the plug to avoid accidents when you clean the machine.
2. Use the wet towel with some anticorrosive detergent to clean the outside parts of the machine. Do
not clean the machine directly with water. Otherwise the electric function will be damaged.
3. If it is not used for a long time, you should cut off the electricity and pull out the plug.
4. Do not brush the inside part of the plate with hard metal. Otherwise you will damage the coat.
G. Troubleshooting guides:
Sequence Problem Causes Possible remedies
1 Light not on Not plugged in outlet 1. fasten the screw of connecting the
wires
2. change the light bulb
2 Can not heat 1. loose in wire of the 1. fasten the screw from which the
heated tube wires come out.
2. heated tube burnt 2. change the heated tube.
3. broken electric 3. change the electric capacity
capacity
3 Too high or too Broken thermostat Change the thermostat
low temperature
Appendix to the machine: 1. an operation manual
2. a bulb
2