2024年5月30日发(作者：都元绿)
I
E
S
DBC 150/650 Series
Dry block temperature calibrators
Ⅲ
Ranges from -45 to 650ЊC
Ⅲ
Rapid heating, cooling and settling
Ⅲ
Reads set temperature and device output
simultaneously
Ⅲ
Measures reference probe, RTD’s, T/C’s, mA,
mV and ohms
Ⅲ
Switch test, ramp, step and preset functions
Ⅲ
Automated calibration via RS 232
D
B
C
S
E
R
DBC 150/650 Series
Dry block temperature calibrators
SETTING THE STANDARD FOR
DRY BLOCK CALIBRATORS
Druck, a leading manufacturer of portable and workshop
calibrators, has redefined the term “temperature calibrator”
with the introduction of the DBCseries. This innovative
calibrator combines a highly stable temperature source with
precision measurement of temperature probe signals,
providing a truly stand-alone temperature calibrator suitable for
laboratory, workshop and portable use.
The product range includes Temperature Source (TS) and
Temperature Calibrator (TC) versions. Each version is available
with a choice of two temperature ranges for use up to 150ЊC
(DBC 150) or alternatively 650ЊC (DBC650).
Druck control technology ensures rapid settling time, excellent
set-point stability and high accuracy. For improved
measurement uncertainty, a traceable PT 100 reference probe
can be positioned directly into the well insert. The probe
output is measured and displayed by the DBC.
The TC version is a complete calibration system which
simultaneously controls the reference temperature whilst
measuring the device under test. In addition, loop power is
provided for transmitters. In calibration mode the percentage
error or temperature deviation is displayed together with the
input and output readings.
DBCSeries - key features
Ranges:DBC150: -45 (below ambient) to 150ЊC.
DBC650: 50 to 650ЊC.
Fast response:Rapid heating, cooling and settling.
Stability:Druck control technology provides
excellent temperature stability.
Reference probe:PT 100 reference probe input.
RS 232 interface:Allows fully automated PCcontrol.
Switch test:Open/closed detection with hysteresis
displayed.
Ramp, preset, step:Programmable Ramp, Preset recall and
calibration Step sequences.
Reduction Inserts:A wide range of standard interchangeable
inserts are available. Inserts can also
be supplied to specific requirements.
Easy to use:Full numeric keypad and input/output menu.
TC version - additional features
The calibrator version includes the following features in
addition to those listed above:
Electrical Inputs:Measures RTD’s, T/C’s, mV/V, mA and
ohms.
Dual Readout:Simultaneous reading of source
temperature and device output.
Error Analysis:Percentage error and deviation
calculations.
Loop Power:24 Vd.c supply.
The DBC series are rugged, easy to use and designed to give
years of reliable service. Stand alone operation eliminates the
need for secondary equipment, making the DBC one of the
most cost-effective temperature calibration systems available.
4 mm input sockets for RTD’s, T/C’s ohms, mA and mV/V*
RTDinput for 2, 3 and 4 wire configurations*
Thermocouple input includes cold junction compensation*
loop power supply*
*TCmodel only
Switch test inputs
Large scratch resistant LCD with backlight
Simple to use input/output menu
Rugged metal case for field use
RS 232 interface
2024年5月30日发(作者：都元绿)
I
E
S
DBC 150/650 Series
Dry block temperature calibrators
Ⅲ
Ranges from -45 to 650ЊC
Ⅲ
Rapid heating, cooling and settling
Ⅲ
Reads set temperature and device output
simultaneously
Ⅲ
Measures reference probe, RTD’s, T/C’s, mA,
mV and ohms
Ⅲ
Switch test, ramp, step and preset functions
Ⅲ
Automated calibration via RS 232
D
B
C
S
E
R
DBC 150/650 Series
Dry block temperature calibrators
SETTING THE STANDARD FOR
DRY BLOCK CALIBRATORS
Druck, a leading manufacturer of portable and workshop
calibrators, has redefined the term “temperature calibrator”
with the introduction of the DBCseries. This innovative
calibrator combines a highly stable temperature source with
precision measurement of temperature probe signals,
providing a truly stand-alone temperature calibrator suitable for
laboratory, workshop and portable use.
The product range includes Temperature Source (TS) and
Temperature Calibrator (TC) versions. Each version is available
with a choice of two temperature ranges for use up to 150ЊC
(DBC 150) or alternatively 650ЊC (DBC650).
Druck control technology ensures rapid settling time, excellent
set-point stability and high accuracy. For improved
measurement uncertainty, a traceable PT 100 reference probe
can be positioned directly into the well insert. The probe
output is measured and displayed by the DBC.
The TC version is a complete calibration system which
simultaneously controls the reference temperature whilst
measuring the device under test. In addition, loop power is
provided for transmitters. In calibration mode the percentage
error or temperature deviation is displayed together with the
input and output readings.
DBCSeries - key features
Ranges:DBC150: -45 (below ambient) to 150ЊC.
DBC650: 50 to 650ЊC.
Fast response:Rapid heating, cooling and settling.
Stability:Druck control technology provides
excellent temperature stability.
Reference probe:PT 100 reference probe input.
RS 232 interface:Allows fully automated PCcontrol.
Switch test:Open/closed detection with hysteresis
displayed.
Ramp, preset, step:Programmable Ramp, Preset recall and
calibration Step sequences.
Reduction Inserts:A wide range of standard interchangeable
inserts are available. Inserts can also
be supplied to specific requirements.
Easy to use:Full numeric keypad and input/output menu.
TC version - additional features
The calibrator version includes the following features in
addition to those listed above:
Electrical Inputs:Measures RTD’s, T/C’s, mV/V, mA and
ohms.
Dual Readout:Simultaneous reading of source
temperature and device output.
Error Analysis:Percentage error and deviation
calculations.
Loop Power:24 Vd.c supply.
The DBC series are rugged, easy to use and designed to give
years of reliable service. Stand alone operation eliminates the
need for secondary equipment, making the DBC one of the
most cost-effective temperature calibration systems available.
4 mm input sockets for RTD’s, T/C’s ohms, mA and mV/V*
RTDinput for 2, 3 and 4 wire configurations*
Thermocouple input includes cold junction compensation*
loop power supply*
*TCmodel only
Switch test inputs
Large scratch resistant LCD with backlight
Simple to use input/output menu
Rugged metal case for field use
RS 232 interface