2024年10月3日发(作者：包白柏)
LED LCD TV
OWNER' S MANUAL
MODEL: LE50K6500UA
LE55K6500UA
LE65K6500UA
Please READ this manual carefully
before operating your TV, and retain
it for future reference
Contents
1、 Safety 2-3
2、 4
3. Base stand assembly ........................................................................................................ 5
4、 Wall . 6
5、 7-10
6、 Remote .11-12
7、 TV .13-20
8、 Trouble 21
-1-
IMPORTANT SAFETY INSTRUCTION
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, install
in accordance with the instructions.
8) Do not install near any heat sources such as
radiations, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9) Do not defeat the safety purpose of the
polarized plug. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the obsolete outlet.
10)
Protect
the power cord from being walked
on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11) Only use attachments/accessories specified
by the manufacturer.
12) Unplug this apparatus during lighting
storms or when unused for long periods of time.
13) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
14) Mains plug is used as the disconnect device,
the disconnect device shall remain readily
operational.
15) The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, table-cloth, curtains, etc.
16) No naked flame sources, such as lighted
candles, should be placed on the apparatus.
17) Attention should be drawn to the
environmental aspects of battery disposal.
18) The use of apparatus in moderate climate.
19) The apparatus shall not be exposed to
dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on
the apparatus.
20)Warning: To avoid any injury caused by lean
of the product, please always ensure the whole
product was placed within the table surface in
horizontal.
-2-
SAFETY AND WARNINGS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN!
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
The symbol indicates that dangerous
voltages constituting a risk of electric shock
are present within this unit.
The symbol indicates that there are
important operating and maintenance
instructions in the literaturaccompanying this
unit.
WARNING:
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
WARNING:
The batteries shall not be exposed to
excessive heat such as sunshine, fire or the
like.
This symbol indicates that this product
incorporates double insulation between
hazardous mains voltage and user accessible
parts. When servicing use only
identical replacement parts.
This marking indicates that this product should
not be disposed with other household wastes
throughout the EU. To prevent possible harm to
the environment or human health from
uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of
material resources. To return your used device,
please use the return and collection systems or
contact the retailer where the product was
purchased. They can take this product for
environmental safe recycling.
High voltages are used in the operation of this television
receiver. Do not remove the cabinet back from your set.
Refer servicing to qualified service personnel.
To prevent fire or electrical shock hazard, do not expose
the television receiver to rain or moisture.
Do not drop or push objects into the television cabinet
slots or openings. Never spill any kind of liquid on the
television receiver.
Do not block the ventilation holes in the back cover.
Adequate ventilation is essential to prevent failure of
electrical components.
Do not trap the power supply cord under the television
receiver.
SAFETY AND WARNINGS
Never stand on, lean on, or suddenly push the television or
its stand. You should pay special attention to children.
Serious injury may result if it falls.
Do not place your television on an unstable cart, stand,
shelf or table. Serious injury to an individual , and damage
to the television, may result if it falls.
When the television receiver is not used for an
extended period of time, it is advisable to disconnect
the AC power cord from the AC outlet.
Avoid exposing the television receiver to direct sunlight
and other sources of heat. Do not stand the television
receiver directly on other products which give off heat,
e.g. video cassette players and audio amplifiers. Do not
place naked flame sources, such as lighted candles on
the television.
If the television is to be built into a compartment or similar
enclosure, the minimum distances must be maintained. Heat
build-up can reduce the service life of your television, and
can also be dangerous.
-3-
INTRODUCTION
Main features
① Used as Television, display terminal, PC display；
② High luminance, wide viewing angle；
③ Can store 1200 DTV programs；
④ HDMI interface；
5 Multi-Media player (USB);
Accessories
Infrared
1
Battery(AAA)...............................2
User’1
Main parameter
Viewing Picture Size (Diagonal)
Resolution
Aspect Ratio
TV System
50"55"
3840x2160
16 : 9
PAL-B/G, I, D/K
SECAM-B/G , D/K NTSC
DVB-T, DVB-C,DVB-T2
PAL/SECAM/MPEG2/MPEG4/H.264
1200(DTV);99(ATV)
AC 100-240V 50/60Hz
65"
Video Signal System
Receiving Channel
Input Power Voltage
Power consumption
120W150W198W
Audio Output Power
（THD7%）
2x10W
Signal Input/Output
High-Definition Multimedia Interface
(HDMI) x 3
Composite Video Input x 1
Audio Input x 1
YCb(Pb)Cr (Pr) x 1
USB x 2
RF x 1
TF x 1
LAN x 1
Headphone Output x 1
COAXIAL Output x 1
Horizontal definition（TVline）
Composite
Video
input>=350
YCb(Pb)Cr(Pr)
>=400
The terms HDMI and HDMI High-Definition Multimedia Interface,and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator,Inc. in the United
States and other countries.
-4-
BASE STAND ASSEMBLY
1. Place the TV with the display side down on a flat surface. Use a cloth to protect the
display.
Locate the 2PCS of bottom bracket into the gap in the bottom of the TV.
2. Lock screws below and check each screw is firmly tightened.
M4X14MM
Note: This stand is not a swivel stand. Do not attempt to rotate the TV.
-5-
WALL MOUNT INSTALLATION
Step One: Use the expansion bolts(4*36PWA) to fix the wall mount brackets into the wall.
wall
Step Two: Fix the wall mount screws (M6x12mm/4pcs) into the rear side of the LCD TV,using
the tongue of
.
*
The TV appearance subject to material object.
Step Three: Put the LCD TV with wall mount screws onto the wall mount brackets.
Warning: the angle between the TV and wall must not be bigger than 3º.
wall
-6-
INSTALLATION
Front panel
1: Remote control sensor.
2: Indicator LED:
RED
STANDBY.
3: Key board
2
1
3
≤8m
KEYBOARD
The keyboard is located at the bottom left near the right side of signal indicator.
Rocker
Bottom
1. Middle Button: press longtime for “power” function; press once for “source” function
2. Up/Down: CH+/-
3. Left/Righ: VOL-/+
REAR AV Connections
LAN
HEADPHONE
VGAPC AUDIO
HDMI1
HDMI2(ARC)
HDMI3
RF
All the terminals are(from left to right):
LAN, HEADPHONE OUTPUT, VGA, PC AUDIO, HDMI1, HDMI2(ARC), HDMI3,RF.
VIDEO/Y
Pb
PrLR
COAXIAL
TF
USB
USB
All the terminals are(from left to right):
VIDEO,YPbPr, AUDIO INPUT, COAXIAL OUTPUT, TF, USB.
Note: VIDEO and YPbPr share one audio channel.
-7-
INSTALLATION
ANTENNA
Note:
Aerial connections: IEC(female).
Input impendance: 75 unbalanced.
PC
STEPS:
Be sure both the TV and computer are Power off.
t VGA and audio cable
t power cord
on the TV, switch to PC mode
on the PC
This sequence is very important.
-8-
INSTALLATION
PRESET MODE (PC)
1
2
3
4
5
6
7
RESOLUTION
800*600
1024*768
1360*768
1280*768
1920*1080
3840*2160
3840*2160
.(Hz)
60
60
60
60
60
60
60
.(KHz)
37.88
48.36
47.7
47.3
67.5
67.5
112.5
PRESET MODE (HDMI)
1
2
3
4
5
6
7
800*600
1024*768
1360*768
1280*768
RESOLUTION
.(Hz)
60
60
60
60
60
60
60
.(KHz)
37.88
48.36
47.7
47.3
67.5
67.5
112.5
1920*1080
3840*2160
3840*2160
-9-
INSTALLATION
AV EQUIPMENT
This TV provides one group of AV ,one group of YPbPr for convenient connection to VCR, DVD
or other video equipment. Please refer to the owner's manual of the equipment to be connected
as well. You can use the input terminals on TV set rear as follows.
Y
Yellow (video)
R
Red (audio R)
W
White(audio L)
R
Red(Pr or Cr)
B
Blue(Pb or Cb)
G
Green(Y)
HDMI
LAN
HEADPHONE
VGAPC AUDIO
HDMI1
HDMI2(ARC)
HDMI3
RF
VIDEO EQUIPMENT with YPbPr
G
BR
WR
G
BR
WR
USB
VIDEO/Y
Y
Pb
PrL
WR
R
COAXIAL
TF
USB
VIDEO EQUIPMENT
Y
WR
TO VIDEO
OUTPUTS
TO AUDIO
OUTPUTS
It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game or stereo
system, YPbPr can support these video fomats: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p.
Note:
, YPbPr share one audio channel.
mes it will not support in different device because the device supplys nonstandard signal.
-10-
REMOTE CONTROLLER
16
17
APP STORE
Press to open the application store.
(Mute)
TOOL
VOL +/-
APP
Press to turn the sound on or off.
Press to open the shortcut menu of tool.
Press to adjust the volume level.
Press to open Menu App Page.
Press to open a favorite channel list. In teletext
mode, press to hold a page.
18
(reverse)
Press to reverse playback in multimedia & Timeshift
mode.
(Play)
Press to play in multimedia mode & Timeshift mode.
Press to stop multimedia playback, REC& Timeshift
mode.
19
SOURCE
Press to open the input source list.
Press to open the Home Page.
20
GUIDE
Press to display electronic programme guide
in TV mode. Press to enter the teletext subpage.
Press to open o r close the teletext mode.
21
22
23
24
25
CH
Press to change the channel.
Press to open the channel teletext mode,
press to switch the image to top,bottom or full.
(forward)
Press to fast forward in multimedia & Timeshift mode.
(REC)
(Pause)
Coloured
buttons
Press to record the TV program you are watching
in DTV mode.
Press to pause in multimedia mode & Timeshift
mode.
In the teletext mode,press this key to enter the
project or the corresponding page.
(Power)
0-9
Press to turn the TV on or off.
Press to select the sound mode.
Press to select the picture mode.
Press to enter a channel number
or password.
Press to switch to the last viewed
channel.
Press to display the channel information.
In teletext mode,press to revealthe
hidden information.
Press to open the on-screen menu. In
teletext mode, press to open the INDEX
page.
Insert Batteries into the Remote Control
OK
Press to confirm a selection.
Press to navigate the on-screen menu.
Press to return to the previous screen.
In teletext mode,press to enter mix
mode.
1. Remove the battery cover.
2. Inserting the 2 AAA 1.5V batteries making sure the polarity
(+ or -) of the batteries matches the polarity marks inside the unit.
3. Mount the battery cover. Replace with new batteries when the
TV set begins to show the following symptoms:Operation is
unsteady or erratic. Sometimes the TV set does not function
with Remote Control Unit.
Remark:
1) Alkaline Battery Recommeded.
2) Remove batteries when they are exhausted or if the remote
control is not to be used for long time.
-11-
FTI
Set your TV when turn on the TV at first time.
Set the network(wire/wifi).
Select the wifi to connect.
TV OPERATION
Select the contry/ LCN/ Antenna Type/ Search
Type to start auto tuning.
Have a good time watching the TV .
-12-
Main Menu
The Main Menu UI are as follow.
Press ▼ /▲/◀/▶ to select the menu.
Press ▼ /▲/◀/▶to select the APPS.
Press ▼ /▲/◀/▶ to select the APP Center to select the APPS.
System Setting
S
elect the Setting in the Main Menu to enter the System Setting.
-13-
TV OPERATION
Network
Wireless Network
Select the WIFI ,and press the passwork to connect.
Wired network
Insert the Ethernet cable ,and select Auto get IP
address to connect the Ethernet.
Time
Press the
◀/▶
to select the Time to set.
Auto Attach Get the current time and date automatically.
24 Hours Select the 12 hours or 24 hours.
Time Zone Select the local time zone.
Time Edit Edit the current time and date.
Date Format Set current date format.
General
Press the
◄ / ►
to select the General and set the general
setting.
-14-
TV OPERATION
Language Setting Select current display language.
Input Method Select the Input method.
System Upgrade Upgrade to the newest system version.
System Recovery Recovery system to original state.
About
Information about the TV.
Media
Multimedia
Press the Input to select Media source.
Select the Video, and OK button to enter.
Audio Track Change the audio track.
Select Subtitle Select On/OFF the subtitle.
Region Language Select the language.
Encoding Standard Select the encoding standard.
Play Mode Select the play mode.
Aspect Ratio Select 16:9/4:3.
Music
Press the
◄ / ►
button to select the Music.
TV OPERATION
Photo
Press the
◄ / ►
button to select the Photo.
Folder
Press the
◄ / ►
button to select the Folder.
Input Source
Press INPUT button to enter input source
P
ress the
▼
/
▲
b
utton to select.
(
A
vailable：TV、
A
V、
Y
PBPR、HDMI1、HDMI2、HDMI3)
-15-
TV OPERATION
TV
TV Setting
Press the MENU button to enter the TV Setting.
Picture
Hue
Adjust the hue(Red,Green,Blue) of the picture.
Noise Reduction (Off/Low/Middle/High)
You can clear up the input signal by set the item.
Color Temp
Select the color temperature that you feel comfortable.
Cool Gives white colors a blue tint.
Medium Gives white colors a neutral tint.
Warm Gives white colors a red tint.
Aspect Ratio
Select the suitable aspect Ration.
(4:3/16:9/Zoom1/Zoom2)
DLC Select ON/OFF.
Sound
Press the ◄/►to select sound.
Press
Enter
button
to
enter
the
sub
-
title
,
and
press ◄/►
to sdjust.
Press the
◄ / ►
to set the picture.
Picture Mode:Highlight the item and Press ENTER to enter
the sub-menu, that shows the picture mode you can choose:
Standard/Dynamic/Mild/User.
Contrast:
Adjust the white level of the picture.
Brightness:
Adjust darkness of black sections in the picture.
Color:
Adjust the color intensity of the picture.
Sharpness:
Object edges are enhanced for picture detail.
Select
BackAdjust
Sound Mode
Standard/Music/Movie/Sports/User(Only in this mode,
Treble and Bass can be adjusted.)
Bass
Adjust the low frequency sounds.
Treble
Adjust the high frequency sounds.
Balance
Adjust the level of sound coming from the left and right
speakers.
AVC
Press L/R to set or cancel. When set on, it will level out
the sound being heard when sudden changes in volume
occur during commercial breaks or channel changes.
-16-
TV OPERATION
Auto Scan
Auto Scan will search for available channels and program
receivable channels.
Press▼/▲ to select Auto Tuning, then press OK to start
auto search.
If you want to stop searching, press EXIT to stop searching.
SPDIF Select to ON/OFF Digital Interface.
Surround Select to ON/OFF Surround.
Channel
Press ◄/►to select Channel.
Press Enter button to enter the sub-title, and press
◄/►to sdjust.
Channel Set the channel number.
Color system Select the color system. (PAL/SECAM/NTSC)
Sound System Select the sound system. (DK/BG/I)
Frequency Input the frequency of the channel.
Antenna Type Select the Antenna Type(Air/Cable).
Auto Scan Searching the programs automatically.
Anolog Manual Scan Searching the ATV programs by input
the frequency.
Digital Manual Scan Searching the DTV programs by input
the frequency.
Channel List List the programs.
Preferences Set your preference about audio.
-17-
Press the ◄/►to select Channel List.
Press to Edit the Channel List.
Press to delete the channel.
Press to enter the rename state, then select the word
you want to change, and ▼/▲ /
◄/►
to select word.
Press to skip the select channel.(Your TV set will skip
the channel automatically when using CH+/- to view
the channels.)
Hearing Impaired Set On/ Off.
AUDIO DESCRIPTION Set On/ Off.
Audio Language Select the language of audio.
Subtitle Language Select the language of subtitle.
Lock
Press ◄/►to select Lock.
-18-
TV OPERATION
Press
Enter
button
and
input
the
password(the default
password is 0000)
to
enter
the
sub
-
title
,
and
press
◄/►
to sdjust.
System Lock Select On/ Off Lock System.
Change Password Select change/keep password.
Parental Control Select On/ Off Parental Control to
select the number of age, which is suitable for your children.
Time
Press ◄/►to select Time.
Press Enter button to enter the sub-title, and press
◄/►to sdjust.
OSD Timer
Select OSD Timer
,and◄
/
►
to adjust.
(Available: OFF, 5sec, 15sec, 30sec)
Sleep Timer
Select Sleep Timer
,and◄
/
►
to adjust.
(Available:OFF, 15min, 30min, 45min, 60min,
90
min,
120
min,
240min).
Setting
Press ◄/►to select Setting.
Press
Enter
button
to
enter
the
sub
-
title
,
and
press
◄/►
to sdjust.
Blue Screen
Set the background color to blue
or black when no input signal.
PVR Setting
Set the PVR function.
Teletext
Set the Teletext.
HDMI CEC Setup
Set the CEC ON/OFF.
Reset
Recall the default setting.
PVR Setting
Press▼ /▲to select PVR Setting.
-19-
TV OPERATION
PVR USB Selector
Select the USB device to recode the program.
Record List
List the programs have recorded.
HDMI CEC Setup
Press ▼/▲to select HDMI CEC Setup.
Reset
Press ▼ /▲ to reset the default setting .
TROUBLE SHOOTING
Trouble phenomenon
Picture
Snow
Audio
Noise
Inspection
antenna position, direction
or connection
Ghost
Normal audio
antenna position, direction
or connection
Interfere
Noise
electronic equipment,car/
motorcycle,fluorescent light
Normal Picture
Mute
Volume(inspect wether the
mute function on the remote
control are started , or audio
system are correct or not)
Power cord is not inserted
Power switch is not opened
Contrast and brightness/volume
setup
Press standby key on the remote
control for inspecting
No picture Mute
No color Normal audio
color control
Scramble
Normal audio
or weak
retune channel
No color
Noise
Audio system
Special Explanation
：The accessories such as remote control is not belongs
to the guarantee。
-20-
4032Q506143
2024年10月3日发(作者：包白柏)
LED LCD TV
OWNER' S MANUAL
MODEL: LE50K6500UA
LE55K6500UA
LE65K6500UA
Please READ this manual carefully
before operating your TV, and retain
it for future reference
Contents
1、 Safety 2-3
2、 4
3. Base stand assembly ........................................................................................................ 5
4、 Wall . 6
5、 7-10
6、 Remote .11-12
7、 TV .13-20
8、 Trouble 21
-1-
IMPORTANT SAFETY INSTRUCTION
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, install
in accordance with the instructions.
8) Do not install near any heat sources such as
radiations, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9) Do not defeat the safety purpose of the
polarized plug. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the obsolete outlet.
10)
Protect
the power cord from being walked
on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11) Only use attachments/accessories specified
by the manufacturer.
12) Unplug this apparatus during lighting
storms or when unused for long periods of time.
13) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
14) Mains plug is used as the disconnect device,
the disconnect device shall remain readily
operational.
15) The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, table-cloth, curtains, etc.
16) No naked flame sources, such as lighted
candles, should be placed on the apparatus.
17) Attention should be drawn to the
environmental aspects of battery disposal.
18) The use of apparatus in moderate climate.
19) The apparatus shall not be exposed to
dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on
the apparatus.
20)Warning: To avoid any injury caused by lean
of the product, please always ensure the whole
product was placed within the table surface in
horizontal.
-2-
SAFETY AND WARNINGS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN!
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
The symbol indicates that dangerous
voltages constituting a risk of electric shock
are present within this unit.
The symbol indicates that there are
important operating and maintenance
instructions in the literaturaccompanying this
unit.
WARNING:
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
WARNING:
The batteries shall not be exposed to
excessive heat such as sunshine, fire or the
like.
This symbol indicates that this product
incorporates double insulation between
hazardous mains voltage and user accessible
parts. When servicing use only
identical replacement parts.
This marking indicates that this product should
not be disposed with other household wastes
throughout the EU. To prevent possible harm to
the environment or human health from
uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of
material resources. To return your used device,
please use the return and collection systems or
contact the retailer where the product was
purchased. They can take this product for
environmental safe recycling.
High voltages are used in the operation of this television
receiver. Do not remove the cabinet back from your set.
Refer servicing to qualified service personnel.
To prevent fire or electrical shock hazard, do not expose
the television receiver to rain or moisture.
Do not drop or push objects into the television cabinet
slots or openings. Never spill any kind of liquid on the
television receiver.
Do not block the ventilation holes in the back cover.
Adequate ventilation is essential to prevent failure of
electrical components.
Do not trap the power supply cord under the television
receiver.
SAFETY AND WARNINGS
Never stand on, lean on, or suddenly push the television or
its stand. You should pay special attention to children.
Serious injury may result if it falls.
Do not place your television on an unstable cart, stand,
shelf or table. Serious injury to an individual , and damage
to the television, may result if it falls.
When the television receiver is not used for an
extended period of time, it is advisable to disconnect
the AC power cord from the AC outlet.
Avoid exposing the television receiver to direct sunlight
and other sources of heat. Do not stand the television
receiver directly on other products which give off heat,
e.g. video cassette players and audio amplifiers. Do not
place naked flame sources, such as lighted candles on
the television.
If the television is to be built into a compartment or similar
enclosure, the minimum distances must be maintained. Heat
build-up can reduce the service life of your television, and
can also be dangerous.
-3-
INTRODUCTION
Main features
① Used as Television, display terminal, PC display；
② High luminance, wide viewing angle；
③ Can store 1200 DTV programs；
④ HDMI interface；
5 Multi-Media player (USB);
Accessories
Infrared
1
Battery(AAA)...............................2
User’1
Main parameter
Viewing Picture Size (Diagonal)
Resolution
Aspect Ratio
TV System
50"55"
3840x2160
16 : 9
PAL-B/G, I, D/K
SECAM-B/G , D/K NTSC
DVB-T, DVB-C,DVB-T2
PAL/SECAM/MPEG2/MPEG4/H.264
1200(DTV);99(ATV)
AC 100-240V 50/60Hz
65"
Video Signal System
Receiving Channel
Input Power Voltage
Power consumption
120W150W198W
Audio Output Power
（THD7%）
2x10W
Signal Input/Output
High-Definition Multimedia Interface
(HDMI) x 3
Composite Video Input x 1
Audio Input x 1
YCb(Pb)Cr (Pr) x 1
USB x 2
RF x 1
TF x 1
LAN x 1
Headphone Output x 1
COAXIAL Output x 1
Horizontal definition（TVline）
Composite
Video
input>=350
YCb(Pb)Cr(Pr)
>=400
The terms HDMI and HDMI High-Definition Multimedia Interface,and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator,Inc. in the United
States and other countries.
-4-
BASE STAND ASSEMBLY
1. Place the TV with the display side down on a flat surface. Use a cloth to protect the
display.
Locate the 2PCS of bottom bracket into the gap in the bottom of the TV.
2. Lock screws below and check each screw is firmly tightened.
M4X14MM
Note: This stand is not a swivel stand. Do not attempt to rotate the TV.
-5-
WALL MOUNT INSTALLATION
Step One: Use the expansion bolts(4*36PWA) to fix the wall mount brackets into the wall.
wall
Step Two: Fix the wall mount screws (M6x12mm/4pcs) into the rear side of the LCD TV,using
the tongue of
.
*
The TV appearance subject to material object.
Step Three: Put the LCD TV with wall mount screws onto the wall mount brackets.
Warning: the angle between the TV and wall must not be bigger than 3º.
wall
-6-
INSTALLATION
Front panel
1: Remote control sensor.
2: Indicator LED:
RED
STANDBY.
3: Key board
2
1
3
≤8m
KEYBOARD
The keyboard is located at the bottom left near the right side of signal indicator.
Rocker
Bottom
1. Middle Button: press longtime for “power” function; press once for “source” function
2. Up/Down: CH+/-
3. Left/Righ: VOL-/+
REAR AV Connections
LAN
HEADPHONE
VGAPC AUDIO
HDMI1
HDMI2(ARC)
HDMI3
RF
All the terminals are(from left to right):
LAN, HEADPHONE OUTPUT, VGA, PC AUDIO, HDMI1, HDMI2(ARC), HDMI3,RF.
VIDEO/Y
Pb
PrLR
COAXIAL
TF
USB
USB
All the terminals are(from left to right):
VIDEO,YPbPr, AUDIO INPUT, COAXIAL OUTPUT, TF, USB.
Note: VIDEO and YPbPr share one audio channel.
-7-
INSTALLATION
ANTENNA
Note:
Aerial connections: IEC(female).
Input impendance: 75 unbalanced.
PC
STEPS:
Be sure both the TV and computer are Power off.
t VGA and audio cable
t power cord
on the TV, switch to PC mode
on the PC
This sequence is very important.
-8-
INSTALLATION
PRESET MODE (PC)
1
2
3
4
5
6
7
RESOLUTION
800*600
1024*768
1360*768
1280*768
1920*1080
3840*2160
3840*2160
.(Hz)
60
60
60
60
60
60
60
.(KHz)
37.88
48.36
47.7
47.3
67.5
67.5
112.5
PRESET MODE (HDMI)
1
2
3
4
5
6
7
800*600
1024*768
1360*768
1280*768
RESOLUTION
.(Hz)
60
60
60
60
60
60
60
.(KHz)
37.88
48.36
47.7
47.3
67.5
67.5
112.5
1920*1080
3840*2160
3840*2160
-9-
INSTALLATION
AV EQUIPMENT
This TV provides one group of AV ,one group of YPbPr for convenient connection to VCR, DVD
or other video equipment. Please refer to the owner's manual of the equipment to be connected
as well. You can use the input terminals on TV set rear as follows.
Y
Yellow (video)
R
Red (audio R)
W
White(audio L)
R
Red(Pr or Cr)
B
Blue(Pb or Cb)
G
Green(Y)
HDMI
LAN
HEADPHONE
VGAPC AUDIO
HDMI1
HDMI2(ARC)
HDMI3
RF
VIDEO EQUIPMENT with YPbPr
G
BR
WR
G
BR
WR
USB
VIDEO/Y
Y
Pb
PrL
WR
R
COAXIAL
TF
USB
VIDEO EQUIPMENT
Y
WR
TO VIDEO
OUTPUTS
TO AUDIO
OUTPUTS
It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game or stereo
system, YPbPr can support these video fomats: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p.
Note:
, YPbPr share one audio channel.
mes it will not support in different device because the device supplys nonstandard signal.
-10-
REMOTE CONTROLLER
16
17
APP STORE
Press to open the application store.
(Mute)
TOOL
VOL +/-
APP
Press to turn the sound on or off.
Press to open the shortcut menu of tool.
Press to adjust the volume level.
Press to open Menu App Page.
Press to open a favorite channel list. In teletext
mode, press to hold a page.
18
(reverse)
Press to reverse playback in multimedia & Timeshift
mode.
(Play)
Press to play in multimedia mode & Timeshift mode.
Press to stop multimedia playback, REC& Timeshift
mode.
19
SOURCE
Press to open the input source list.
Press to open the Home Page.
20
GUIDE
Press to display electronic programme guide
in TV mode. Press to enter the teletext subpage.
Press to open o r close the teletext mode.
21
22
23
24
25
CH
Press to change the channel.
Press to open the channel teletext mode,
press to switch the image to top,bottom or full.
(forward)
Press to fast forward in multimedia & Timeshift mode.
(REC)
(Pause)
Coloured
buttons
Press to record the TV program you are watching
in DTV mode.
Press to pause in multimedia mode & Timeshift
mode.
In the teletext mode,press this key to enter the
project or the corresponding page.
(Power)
0-9
Press to turn the TV on or off.
Press to select the sound mode.
Press to select the picture mode.
Press to enter a channel number
or password.
Press to switch to the last viewed
channel.
Press to display the channel information.
In teletext mode,press to revealthe
hidden information.
Press to open the on-screen menu. In
teletext mode, press to open the INDEX
page.
Insert Batteries into the Remote Control
OK
Press to confirm a selection.
Press to navigate the on-screen menu.
Press to return to the previous screen.
In teletext mode,press to enter mix
mode.
1. Remove the battery cover.
2. Inserting the 2 AAA 1.5V batteries making sure the polarity
(+ or -) of the batteries matches the polarity marks inside the unit.
3. Mount the battery cover. Replace with new batteries when the
TV set begins to show the following symptoms:Operation is
unsteady or erratic. Sometimes the TV set does not function
with Remote Control Unit.
Remark:
1) Alkaline Battery Recommeded.
2) Remove batteries when they are exhausted or if the remote
control is not to be used for long time.
-11-
FTI
Set your TV when turn on the TV at first time.
Set the network(wire/wifi).
Select the wifi to connect.
TV OPERATION
Select the contry/ LCN/ Antenna Type/ Search
Type to start auto tuning.
Have a good time watching the TV .
-12-
Main Menu
The Main Menu UI are as follow.
Press ▼ /▲/◀/▶ to select the menu.
Press ▼ /▲/◀/▶to select the APPS.
Press ▼ /▲/◀/▶ to select the APP Center to select the APPS.
System Setting
S
elect the Setting in the Main Menu to enter the System Setting.
-13-
TV OPERATION
Network
Wireless Network
Select the WIFI ,and press the passwork to connect.
Wired network
Insert the Ethernet cable ,and select Auto get IP
address to connect the Ethernet.
Time
Press the
◀/▶
to select the Time to set.
Auto Attach Get the current time and date automatically.
24 Hours Select the 12 hours or 24 hours.
Time Zone Select the local time zone.
Time Edit Edit the current time and date.
Date Format Set current date format.
General
Press the
◄ / ►
to select the General and set the general
setting.
-14-
TV OPERATION
Language Setting Select current display language.
Input Method Select the Input method.
System Upgrade Upgrade to the newest system version.
System Recovery Recovery system to original state.
About
Information about the TV.
Media
Multimedia
Press the Input to select Media source.
Select the Video, and OK button to enter.
Audio Track Change the audio track.
Select Subtitle Select On/OFF the subtitle.
Region Language Select the language.
Encoding Standard Select the encoding standard.
Play Mode Select the play mode.
Aspect Ratio Select 16:9/4:3.
Music
Press the
◄ / ►
button to select the Music.
TV OPERATION
Photo
Press the
◄ / ►
button to select the Photo.
Folder
Press the
◄ / ►
button to select the Folder.
Input Source
Press INPUT button to enter input source
P
ress the
▼
/
▲
b
utton to select.
(
A
vailable：TV、
A
V、
Y
PBPR、HDMI1、HDMI2、HDMI3)
-15-
TV OPERATION
TV
TV Setting
Press the MENU button to enter the TV Setting.
Picture
Hue
Adjust the hue(Red,Green,Blue) of the picture.
Noise Reduction (Off/Low/Middle/High)
You can clear up the input signal by set the item.
Color Temp
Select the color temperature that you feel comfortable.
Cool Gives white colors a blue tint.
Medium Gives white colors a neutral tint.
Warm Gives white colors a red tint.
Aspect Ratio
Select the suitable aspect Ration.
(4:3/16:9/Zoom1/Zoom2)
DLC Select ON/OFF.
Sound
Press the ◄/►to select sound.
Press
Enter
button
to
enter
the
sub
-
title
,
and
press ◄/►
to sdjust.
Press the
◄ / ►
to set the picture.
Picture Mode:Highlight the item and Press ENTER to enter
the sub-menu, that shows the picture mode you can choose:
Standard/Dynamic/Mild/User.
Contrast:
Adjust the white level of the picture.
Brightness:
Adjust darkness of black sections in the picture.
Color:
Adjust the color intensity of the picture.
Sharpness:
Object edges are enhanced for picture detail.
Select
BackAdjust
Sound Mode
Standard/Music/Movie/Sports/User(Only in this mode,
Treble and Bass can be adjusted.)
Bass
Adjust the low frequency sounds.
Treble
Adjust the high frequency sounds.
Balance
Adjust the level of sound coming from the left and right
speakers.
AVC
Press L/R to set or cancel. When set on, it will level out
the sound being heard when sudden changes in volume
occur during commercial breaks or channel changes.
-16-
TV OPERATION
Auto Scan
Auto Scan will search for available channels and program
receivable channels.
Press▼/▲ to select Auto Tuning, then press OK to start
auto search.
If you want to stop searching, press EXIT to stop searching.
SPDIF Select to ON/OFF Digital Interface.
Surround Select to ON/OFF Surround.
Channel
Press ◄/►to select Channel.
Press Enter button to enter the sub-title, and press
◄/►to sdjust.
Channel Set the channel number.
Color system Select the color system. (PAL/SECAM/NTSC)
Sound System Select the sound system. (DK/BG/I)
Frequency Input the frequency of the channel.
Antenna Type Select the Antenna Type(Air/Cable).
Auto Scan Searching the programs automatically.
Anolog Manual Scan Searching the ATV programs by input
the frequency.
Digital Manual Scan Searching the DTV programs by input
the frequency.
Channel List List the programs.
Preferences Set your preference about audio.
-17-
Press the ◄/►to select Channel List.
Press to Edit the Channel List.
Press to delete the channel.
Press to enter the rename state, then select the word
you want to change, and ▼/▲ /
◄/►
to select word.
Press to skip the select channel.(Your TV set will skip
the channel automatically when using CH+/- to view
the channels.)
Hearing Impaired Set On/ Off.
AUDIO DESCRIPTION Set On/ Off.
Audio Language Select the language of audio.
Subtitle Language Select the language of subtitle.
Lock
Press ◄/►to select Lock.
-18-
TV OPERATION
Press
Enter
button
and
input
the
password(the default
password is 0000)
to
enter
the
sub
-
title
,
and
press
◄/►
to sdjust.
System Lock Select On/ Off Lock System.
Change Password Select change/keep password.
Parental Control Select On/ Off Parental Control to
select the number of age, which is suitable for your children.
Time
Press ◄/►to select Time.
Press Enter button to enter the sub-title, and press
◄/►to sdjust.
OSD Timer
Select OSD Timer
,and◄
/
►
to adjust.
(Available: OFF, 5sec, 15sec, 30sec)
Sleep Timer
Select Sleep Timer
,and◄
/
►
to adjust.
(Available:OFF, 15min, 30min, 45min, 60min,
90
min,
120
min,
240min).
Setting
Press ◄/►to select Setting.
Press
Enter
button
to
enter
the
sub
-
title
,
and
press
◄/►
to sdjust.
Blue Screen
Set the background color to blue
or black when no input signal.
PVR Setting
Set the PVR function.
Teletext
Set the Teletext.
HDMI CEC Setup
Set the CEC ON/OFF.
Reset
Recall the default setting.
PVR Setting
Press▼ /▲to select PVR Setting.
-19-
TV OPERATION
PVR USB Selector
Select the USB device to recode the program.
Record List
List the programs have recorded.
HDMI CEC Setup
Press ▼/▲to select HDMI CEC Setup.
Reset
Press ▼ /▲ to reset the default setting .
TROUBLE SHOOTING
Trouble phenomenon
Picture
Snow
Audio
Noise
Inspection
antenna position, direction
or connection
Ghost
Normal audio
antenna position, direction
or connection
Interfere
Noise
electronic equipment,car/
motorcycle,fluorescent light
Normal Picture
Mute
Volume(inspect wether the
mute function on the remote
control are started , or audio
system are correct or not)
Power cord is not inserted
Power switch is not opened
Contrast and brightness/volume
setup
Press standby key on the remote
control for inspecting
No picture Mute
No color Normal audio
color control
Scramble
Normal audio
or weak
retune channel
No color
Noise
Audio system
Special Explanation
：The accessories such as remote control is not belongs
to the guarantee。
-20-
4032Q506143