戴森空气净化器 Pure Hot+Cool Link 型号 HP02 产品用户手册说明书-USB迷|专注于互联网分享

2024年3月6日发(作者：左丘萍雅)

MODEL PART DIAGRAMFRONTControl PanelBACKAir OutletVentHandleFront PanelPower PlugCONTROL PANEL01. Auto Mode Indicator - The LED "Auto" light

will indicate when Auto Mode is activated.02. Air Quality Indicator - Color coded LED

light indicates one of three levels of Air Quality:

Red (poor), Amber (fair), and Blue (good).03. Fan Speed Indicator - Indicates the current

07fan speed.04. Sleep Mode Indicator - The LED "Sleep"

light will indicate when Sleep Mode is on.05. Filter Replacement Indicator - LED light

indicates when it is time to change the filter.06. Filter Reset Button - After replacing the

True HEPA Filter, use a small object such as a

paper clip, to press and hold the Filter Reset

Button for at least 5 seconds until the Filter

Replacement Indicator turns off.07. Smart Sensor - Detects the amount of

odorous gas in the environment. When in Auto

mode, the fan speed adjusts according to the

detected amount of gas.08. Power Button - Turns the unit on or off.

During the first 30 seconds of powering up, the

Air Quality Indicator will cycle through Blue,

Amber and Red colors.•Smart sensor takes approximately 4 minutes

to detect the air quality in the environment

before normal operation begins.09-1. Fan Speed/Auto/Sleep Buttons - Use the

Fan Speed arrow buttons to set the desired

fan speed. Fan Speeds cycle over in this

sequence: Auto, Low, Medium, High, Turbo,

Sleep, Mode: Automatically adjusts fan speeds

according to your indoor air quality. The fan

speed will adjust to low when air quality is good,

medium when fair, and to high when poor.PACKAGE CONTENTSUnit(1)Pre-Filter(8) Activated Carbon Filters(2) True HEPA FiltersUserManualAlexa Setup Guide /Wi-Fi Setup GuideSleep Mode: When Sleep Mode is activated,

the Air Quality Indicator LED light is disabled.•Fan speed will automatically set to minimum

speed (lower than 'Low') which will be

nearly silent. When Sleep Mode is active,

PlasmaWave® will be disabled, but it can be

turned back on.09-2. PlasmaWave® Button - Press and hold

the buttons

+for 3 secondsPress the Plasmawave® button when the unit

is on to enable or disable this feature. By

default, PlasmaWave® is enabled whenever the

unit is powered on. When the unit is running,

you may hear a chirping or buzzing sound.

The sound is from large particles passing

through PlasmaWave®, it is normal and does

not signify product failure.10. PlasmaWave® Indicator - Indicates

whether PlasmaWave® is enabled or disabled.11. Wi-Fi Button -

Press for 3 seconds to

activate pairing mode. When Wi-Fi is paired,

press the button to turn Wi-Fi off or back on.12. Wi-Fi Indicator - Enables or disables the Wi-Fi feature. When in the pairing state, the Wi-Fi

LED flashes. When paired successfully, the Wi-Fi

LED will be a solid white light.13. Light Sensor - Detects the amount of

ambient light in the environment. When in Auto

Mode, the light sensor detects when to put the

unit into Sleep Smart Wi-Fi Setup - Refer to the Wi-Fi

Guide Guide provided inside the box.* For a Certiﬁed Refurbished Air Puriﬁer, there will be 4 New Carbon Filters and 1 True HEPA Filter included;equivalent to a 1-year TO USEAllow 12 ~ 18 in. of space between TVs, radios, and other

electronics.

Electromagnetic interference from certain

electronics may cause product indoors away from direct sunlight. Direct exposure

may cause product malfunction or failure.12~18 in12~18 inOnly place on hard, flat surfaces. Flimsy or slanted

surfaces may result in abnormal noise and at least 12 ~ 18 in. from walls for maximum air flowAir Purification means it

removes inanimate particles4-STAGE AIR PURIFICATION1Pre-Filter2Activated Carbon Filter3True HEPA Filter4PlasmaWaveINITIAL OPERATION1.

Remove the front panel by grasping its upper edge

and gently pulling LEANING CARECleaning the Filters:Cleaning the Exterior & Interior:2.

Remove the Pre-Filter, then the bag of filters behind it.3.

Remove filters from protective plastic bag.4.

Install the filters until they fit securely in place.03. True HEPA Filter (back)02. Activated Carbon Filter (middle)01. Pre-Filter (front)030201Latch5.

After filters are installed, close the front panel.6.

Insert the power cord into an electrical NANCEWhen to Replace Filters

FilterPre-FilterActivated Carbon FilterTrue HEPA FilterIndicator LightnonenoneCAN'T BE WASHEDWhen to ServiceEvery 14 daysWhen to ReplacePermanentEvery 3 monthsLasts Approx.12 monthsUse a vacuum cleaner or soft brush to clean

the Pre-Filter.•If it is excessively soiled, rinse in room

temperature water. Do not use detergent or

soap.

Allow the filter to dry for 24 hours or

more before using. Intervals between filter

cleaning may vary depending on the air

quality. Do not use hot water over 104oF or

volatile fluids such as paint with a soft damp cloth using room

temperature water.•Afterwards, wipe it down with a dry the front panel and clean the interior

with a vacuum cleaner.•For optimal performance, clean every 1 - 2

SPECIFICATIONS•When the Check Filter Indicator LED is on, it is time to replace the Filter.•Intervals between filter replacement may vary depending on environment.• When cleaning the unit, always unplug the power cord

ModelC545first and then wait until the unit has cooled eAC 120 V / 60 Hz• Never disassemble, repair, or modify this unit Rate65 W• Do not use flammable sprays or liquid ions13.7"W × 8.4"D × 20.5"H• Do not allow children to clean or maintain the 11 lbs• Before cleaning or maintaining, ensure unit is SKUFilter S: 1712-0096-00• Do not use benzene, alcohol, or other volatile fluids,

Exterior design, and product specifications may be changed

which may cause damage or t prior notice to improve product ING FILTERS1712-0096-00Contact Winix for product related inquiries and customer service•Dedicated Call Center: (877) 699-4649•Website: expedite service, please specify the model name and number, the nature of the problem, your

contact information, and your Troubleshooting or Frequently Asked Questions, please visit: /faq/Resetting Filter Life:

After replacing your True HEPA Filter, place the Pre-Filter back in and close the Front Panel.

While the unit is on, hold the Filter Reset Button for at least 5 seconds until you hear the beep.

After the beep, the Filter Replacement Indicator will disappear. The True HEPA Filter is now reset.

SAFETY AND CAUTIONSBefore operating this equipment, carefully read and

follow these safety G

Follow these instructions to reduce the

risk of serious injury or death and to

reduce risk of damaging the INSTRUCTIONSThank you for purchasing a Winix air purifier. This product is for household use ANT CAUTIONS FOR USING YOUR AIR PURIFIER:

WARNING:

Follow the instructions in this manual to reduce the risk of electric shock, short circuit, and/or fire.•Do not repair or modify the unit. All repairs

should be completed by a qualified the unit may become wet, such as the

t failure and deformation.•If the power cord is damaged, it must be

replaced by a special cord. Reassembly

Ensure filters are inserted before running unit.

is available from the manufacturer or its

Running the unit without filters can shorten the

service an of the unit and cause electric shock or injury.•This appliance is not intended for use

Be sure foreign objects are NOT inserted into the

by a person (including children) with

vents on the unit.

Objects can include pins, rods, and

reduced physical sensory or mental

lities, or lack of experience and

Do not touch any part of the interior of the unit with

knowledge of the unit, unless they have

wet hands.

The high voltage may cause electric given supervision or instruction

Ensure unit intake and outlet vents do not

concerning use of the appliance by a

become blocked.

Blockage may lead to increased

person responsible for their al termperatures, causing product failure and

•Children should be supervised to ensure

they do not play with the not use the unit as a step stool or place heavy

•This unit is not intended to be used to

objects on the unit.

Personal injury may occur or

preserve documents or art not place below any electrical not have the unit facing into wind or

not pull on the power cord when

unplugging the not tie or knot the power cord when

unit is in the unit becomes submerged in water,

unplug it and contact customer not unplug or move the unit while in

not plug additional appliances into the

same outlet or power not touch the plug with wet the unit when not in operation for

extended periods of not place around heating cord can become damaged by

forcefully bending, pulling, twisting,

bundling, pinching or placing heavy

objects on not install in any sort of motor or

transport vehicle (trucks, boats, ships,

etc.).Do not place in an area with excessive

amounts of noxious not place near any flammable

materials (aerosols, fuel, gases, etc.).Do not place in excessively humid areas

where the unit may become not place unit closer than 12 inches

from the wall during operation. It may

cause condensation on the wall and the

surrounding not use around mist or fumes from

industrial oil or around large quantities of

metallic dust.•The plug for this unit is polarized with one blade

•Do not insert fingers or foreign objects into air

wider than the other. Do not force the plug into

intake or electrical outlet. Do not alter the plug in

•Do not use the unit near flammable gases. Do

any way. If the plug does not fit into the outlet,

not use near cigarettes, incense, or other spark-reverse the plug. If it still does not fit, contact a

creating ied technician to install a proper outlet.•Unit will not remove carbon monoxide emitted

•Do not use if the power cord or plug is damaged

from heating appliances or other the connection to the wall outlet is loose.•Unplugging the product disconnects the remote

•Use AC 120V ons.•Do not damage, break, forcefully bend, pull,

twist, bundle, coat, pinch, or place heavy

IMPORTANT PRECAUTIONS FOR USING YOUR

objects on the power PURIFIER:•Periodically remove dust from the power will reduce the risk of shock due to humidity

•Do not block the intake or outlet up.•Do not use near hot objects, such as a stove.•Remove the power plug from the outlet before

•Do not use where the unit may come into contact

cleaning the unit. When removing the power

with , grasp by holding the plug itself, never hold

by the cord.•Do not use the unit on its side.•If the power plug is damaged, it must be

replaced by the manufacturer or a qualified

technician.•Remove the power plug from the outlet when

not in use.•Do not handle the power plug with wet hands.•Do not operate the unit when using indoor

smoke-generating insecticides.•Do not clean unit with benzene or paint not spray insecticides on the unit.•Do not use the unit where it is humid or

•Keep away from products that generate oily

residue, such as a deep fryer.•Do not use detergent to clean the unit.•Do not operate without a filter.•Do not wash and reuse the True HEPA Filter.•Hold the handle on the back of the unit to

transport.•Do not hold by the front panel.•Do not stick any small objects into the air outlet

vents or YEAR WARRANTY

For more warranty information visit:

/terms-and-conditions/The terms of the warranty are as follows:1.

This product is manufactured under stringent quality control and warranty will be voided if product failure is a result of negligence or misuse by the consumer.A proof of purchase must be presented upon claiming a Product the proof of purchase in a safe place or register your product on to

upload your proof of purchase.5.

This warranty is valid only in the USA and Canada.* Certified Refurbished Air Purifiers come with a 1-year warranty. All Winix Certified Refurbished Air Purifiers go

through a detailed inspection and refurbishment process to ensure all quality and performance standards are PURIFIERWarning: Changes or modifications to this unit not expressly approved by the party responsible

for compliance could void the user's authority to operate the : This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more

of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.•Consult the dealer or an experienced radio/TV technician for device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation,

Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to

the following two conditions:•This device may not cause interference.•This device must accept any interference, including interference that may cause undesired

operation of the device.C545 USER MANUAL"In French: Cet appareil contient des émetteurs/récepteurs exemptés de licence et conformes

aux normes Innovation, Science et Economic. RSS(s) sans licence de Développement Canada. Le

fonctionnement est soumis aux deux conditions suivantes:•cet appareil ne doit pas causer d’interférences nuisibles, et•cet appareil doit accepter toute interférence reçue, y compris les interférences pouvant provoquer

un fonctionnement non souhaité."The energy efficiency of this ENERGY STAR

certified model is measured based on a ratio

between the model’s CADR for smoke and the

electrical energy it consumes, or CADR/Watt.• The product warranty is printed on the back of this guide This product is manufactured

for use only in USA / CA. This product is suitable for 120 V only.