2024年3月30日发(作者：支驰翰)
动圈式麦克风
DM-2300动圈麦克风的
结构及材质是专为KTV包厢
及卡拉OK演唱等场合而设
计。麦克风铜焊结构的网头
及锌合金材质的外壳非常坚
固，且网环为多棱形，防止
意外滑落。表面处理手感细
腻，不易磨损。当然表现突
出的还是它的音色，低音清
晰，高音无爆破声，并能承
受高音压。所标配线材为双
芯连接线，具有很好的屏蔽
1. 把卡侬(XLR)插头插入麦克风，旋转插头使上面
的扣键与麦克风上的槽口对准，然后将插头推入
麦克风，直至扣键定位。
2. 麦克风与连接线分开时，可握住插头，同时按压
扣键，然后将插头从麦克风拉出。
使用说明:
1. 用手罩住麦克风头部，或使麦克风接近扩音器，
可能产生啸叫声，遇此情形时，首先降低音量，
拉开同扩音器的距离，尽量使麦克风不同扩音器
相对。
2. 麦克风拾音网和风噪过滤海绵不要沾染灰尘，因
为这些灰尘可能会改变麦克风的频响特性。定期
清洗拾音网和过滤海绵，并确定干燥后才可安装。
效果及平衡输出功能，使线材噪音低到可以忽略。
技术参数:
单体: 动圈式
指向性: 单指向
频率响应: 60Hz-18kHz
灵敏度: -50dB±3dB (0dB=1V/Pa at 1kHz)
输出阻抗: 600Ω±30%
3. 麦克风灵敏度高，必须注意不要从高处掉下，打
击或给予强烈冲击。
4. 麦克风不使用时应存放在干燥清洁的地方，避免
在温度、湿度过高的场所保管或使用，以免影响
灵敏度和音色。
频率响应曲线图:
Frequency Response Graph
※ 本产品相关规格如有变更恕不另行通知。
※ 如需服务和配件方面的信息，请就近和得胜代理商联
连接线的安装与拆卸:
系，或请访问得胜网站 .
广东得胜电子有限公司
生产基地：广东省惠州市博罗县龙溪镇富康一路2号 邮编：516121
DYNAMIC MICROPHONE
Specially designed for KTV Box
andkaraoke occasion etc., much more
attention is paid to the construction
and material of our DM-2300 dynamic
microphone. The firmly brazing grille
and Zinc die-casting housing are
adopted. Moreover, the ring by which
the top part and the bottom part of the
grille are linked enjoys the capability
of preventing the whole body from
unexpected rolling down due to its
shape of multi-rhombus. With excellent
painting on the body and exquisite feel,
it is hard to be worn away. However,
the best characteristic is its sound
quality, which provides clear and distinct bass and alt without
exploding noise
and also can bear high SPL. The balanced
cable minimizes the cable noise owing to the excellent shield
Connecting and disconnecting the
microphone cable:
1. Insert the XLR connector into the microphone. If necessary,
rotate the connector to align the key on the connector and
the groove in the microphone. Push the connector into the
microphone until it clicks.
2. To disconnect the cable and microphone, grasp the
connector while depressing the tab. pull the connector
away from the microphone.
Cautions:
1.
If the head of the microphone is covered by hand or
brought close to the speaker, a howling sound may be
generated. To prevent this, first decrease the volume,
then place the microphone so that it is not pointed to the
speaker and that there is a sufficient distance between
the microphone and speaker.
2. It is important to keep foreign particles out of the grill
and the windscreen because they may alter the
frequency response of the microphone. The grill shall be
effect and balanced output function.
Specifications:
Element: Moving Coil Dynamic
Polar Pattern: Uni-Directional
Frequency Response: 60Hz-18KHz
Sensitivity: -50dB±3dB (0dB=1V/Pa at 1KHz)
Output impedance: 600Ω±30% (at 1KHz)
periodically cleaned using warm, soapy water, rinsed
with plain water and let dry before replacing.
3. Due to the high sensitivity of the cartridge, do not drop it
from high or apply strong shock to it.
4. To maintain the sensitivity and quality of sound
reproducing, avoid exposing it to moisture and
extreme temperatures.
Frequency response graph:
-40
-50
※ The related specification or deployment are subject to
change sithout prior notice.
※ For additional information about service or parts,
20
50
100
200
500
-60
(dB)
-70
1K
2K
5K
20K
(Hz)
Please contact your local authorized takstar service
center or visit takstar at www. takstar. com
Frequency Response Graph
GUANGDONG TAKSTAR ELECTRONIC CO., LTD
Address: No. 2 Fu Kang Yi Rd., Longxi Boluo Huizhou, Guangdong 516121 China
Tel: +86-752-6383644Fax: +86-752-6383952
E-mail:*****************
Website:
2024年3月30日发(作者：支驰翰)
动圈式麦克风
DM-2300动圈麦克风的
结构及材质是专为KTV包厢
及卡拉OK演唱等场合而设
计。麦克风铜焊结构的网头
及锌合金材质的外壳非常坚
固，且网环为多棱形，防止
意外滑落。表面处理手感细
腻，不易磨损。当然表现突
出的还是它的音色，低音清
晰，高音无爆破声，并能承
受高音压。所标配线材为双
芯连接线，具有很好的屏蔽
1. 把卡侬(XLR)插头插入麦克风，旋转插头使上面
的扣键与麦克风上的槽口对准，然后将插头推入
麦克风，直至扣键定位。
2. 麦克风与连接线分开时，可握住插头，同时按压
扣键，然后将插头从麦克风拉出。
使用说明:
1. 用手罩住麦克风头部，或使麦克风接近扩音器，
可能产生啸叫声，遇此情形时，首先降低音量，
拉开同扩音器的距离，尽量使麦克风不同扩音器
相对。
2. 麦克风拾音网和风噪过滤海绵不要沾染灰尘，因
为这些灰尘可能会改变麦克风的频响特性。定期
清洗拾音网和过滤海绵，并确定干燥后才可安装。
效果及平衡输出功能，使线材噪音低到可以忽略。
技术参数:
单体: 动圈式
指向性: 单指向
频率响应: 60Hz-18kHz
灵敏度: -50dB±3dB (0dB=1V/Pa at 1kHz)
输出阻抗: 600Ω±30%
3. 麦克风灵敏度高，必须注意不要从高处掉下，打
击或给予强烈冲击。
4. 麦克风不使用时应存放在干燥清洁的地方，避免
在温度、湿度过高的场所保管或使用，以免影响
灵敏度和音色。
频率响应曲线图:
Frequency Response Graph
※ 本产品相关规格如有变更恕不另行通知。
※ 如需服务和配件方面的信息，请就近和得胜代理商联
连接线的安装与拆卸:
系，或请访问得胜网站 .
广东得胜电子有限公司
生产基地：广东省惠州市博罗县龙溪镇富康一路2号 邮编：516121
DYNAMIC MICROPHONE
Specially designed for KTV Box
andkaraoke occasion etc., much more
attention is paid to the construction
and material of our DM-2300 dynamic
microphone. The firmly brazing grille
and Zinc die-casting housing are
adopted. Moreover, the ring by which
the top part and the bottom part of the
grille are linked enjoys the capability
of preventing the whole body from
unexpected rolling down due to its
shape of multi-rhombus. With excellent
painting on the body and exquisite feel,
it is hard to be worn away. However,
the best characteristic is its sound
quality, which provides clear and distinct bass and alt without
exploding noise
and also can bear high SPL. The balanced
cable minimizes the cable noise owing to the excellent shield
Connecting and disconnecting the
microphone cable:
1. Insert the XLR connector into the microphone. If necessary,
rotate the connector to align the key on the connector and
the groove in the microphone. Push the connector into the
microphone until it clicks.
2. To disconnect the cable and microphone, grasp the
connector while depressing the tab. pull the connector
away from the microphone.
Cautions:
1.
If the head of the microphone is covered by hand or
brought close to the speaker, a howling sound may be
generated. To prevent this, first decrease the volume,
then place the microphone so that it is not pointed to the
speaker and that there is a sufficient distance between
the microphone and speaker.
2. It is important to keep foreign particles out of the grill
and the windscreen because they may alter the
frequency response of the microphone. The grill shall be
effect and balanced output function.
Specifications:
Element: Moving Coil Dynamic
Polar Pattern: Uni-Directional
Frequency Response: 60Hz-18KHz
Sensitivity: -50dB±3dB (0dB=1V/Pa at 1KHz)
Output impedance: 600Ω±30% (at 1KHz)
periodically cleaned using warm, soapy water, rinsed
with plain water and let dry before replacing.
3. Due to the high sensitivity of the cartridge, do not drop it
from high or apply strong shock to it.
4. To maintain the sensitivity and quality of sound
reproducing, avoid exposing it to moisture and
extreme temperatures.
Frequency response graph:
-40
-50
※ The related specification or deployment are subject to
change sithout prior notice.
※ For additional information about service or parts,
20
50
100
200
500
-60
(dB)
-70
1K
2K
5K
20K
(Hz)
Please contact your local authorized takstar service
center or visit takstar at www. takstar. com
Frequency Response Graph
GUANGDONG TAKSTAR ELECTRONIC CO., LTD
Address: No. 2 Fu Kang Yi Rd., Longxi Boluo Huizhou, Guangdong 516121 China
Tel: +86-752-6383644Fax: +86-752-6383952
E-mail:*****************
Website: