2024年5月31日发(作者：理志行)
AC2212/00
Compact 2-Way Loudspeaker
with 1 x 12” LF
Key Features:
u
100° x 100° Coverage.
u
P
Waveguide for good pattern control
T™ Progressive Transition™
with low distortion.
u
Bi-Amp/Passive Switchable.
u
Optional U-Bracket for easy installation.
u
O
(see AE Series Array Guide).
ptional planar array frame kit
Applications:
u
Lecture halls
u
Houses of worship
u
Corporate learning centers
u
Small performing arts facilities
u
Theatrical sound design
u
Auditoriums
u
Sports facilities
u
Themed entertainment venues
AC2212/00 is a compact 2-way full-
range loudspeaker system comprised of
one 300 mm (12 in) low frequency drive
and one 38 mm (1.5 in) exit/ 44
r
(1.75 in) voice-coil compression driver.
mm
The PT Progressive Transition waveguide
provides wide 100° by 100° coverage.
High-slope passive crossovers minimize
band overlap.
The cabinet is fitted with M10 threaded
suspension points. Optional U-bracket, as
well as pre-engineered array bracketry
is available for easy installation. Four
threaded inserts located on back of
the enclosure allow attachment of an
Omnimount™ or simila
bracket.
r mounting
AC2212/00 is part of JBL’s AE
Application Engineered Series, a versatil
family of loudspeakers for a wide variety
e
of fixed installation application s.
Specifications:
System:
Frequency Range
1
(-10 dB): 50 Hz – 19 kHz
Frequency Response
1
(±3 dB): 55 Hz – 17 kHz
Coverage Pattern: 100° x 100°
Directivity Factor (Q): 7.1
Directivity Index (DI): 8.5 dB
Crossover Modes: Bi-amp/Passive switchable
Passive Crossover Slopes
2
: 4th order (24 dB/oct) Transitional HP & LP, 1.3 kHz
Transducer Power Rating (AES)
3
: L
250 W (1000 W peak), 100 hrs
F: 300 W (1200 W peak), 2 hrs
HF: 50 W (200 W peak), 2 hrs
Long-Term System Power Rating (IEC)
4
: Passive mode: 250 W (1000 W peak), 100 hrs
Maximum SPL
5
: B
LF: 120 dB-SPL cont avg (126 dB peak)
i-amp mode:
HF: 126 dB-SPL cont avg (132 dB peak)
Passive mode:
120 dB-SPL cont avg (126 dB peak)
System Sensitivity
6
(1W @ 1m): Passive mode: 95 dB SPL
Transducers:
Low Frequency Driver: 1 x JBL M112-8 300 mm (12 in) driver with 63 mm (2.5 in) voice coil
Nominal Impedance: 8 ohms
Sensitivity
6
(1W @ 1m, within operational band): 95 dB SPL
High Frequency Driver: J
(1.75 in) voice coil
BL 2418H-1/MTA, 38 mm (1.5 in) exit compression driver, 44 mm
Nominal Impedance: 8 ohms
Sensitivity (1W @ 1m): 109 dB SPL
Waveguide: PT-F1010HF
Physical:
Enclosure: T
11-ply Finnish birch plywood
rapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade
Suspension Attachment: 1
4 x M8 on rear for MultiMount
5 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware.
®
MM-024-BT, or MM-020-CM
MM-022-BT,
Finish: Black DuraFlex™ finish. White available upon request.
Grille: P
black foam backing.
owder coated 14 gauge perforated steel, with acoustically transparent
Input Connector: N
terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or
L4 Neutrik Speakon
®
and CE-compliant covered barrier strip
max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier
strip for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D):
548 x 355 x 352 mm
(21.6 x 14.0 x 13.9 in)
Net Weight: 19.1 kg (42 lb)
Optional Accessories: M
U
10 x 35 mm forged shoulder eyebolts with washers
Optional planar array frame kit. See AE Series Bracket Guide
-Bracket MTU-4
Bi-amp mode, with recommended active tuning.
Resultant engineered acoustical response of crossover network and components.
long-term 100 hr rating are specified for low-frequency transducers.
AES standard, one decade pink noise with 6 dB crest factor within device’s operational band, free air. Standard AES 2 hr rating plus
IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.
Calculated based on power rating and sensitivity, exclusive of power compression.
Anechoic sensitivity in free field, no additional sensitivity gain from boundary loading.
JBL continually engages in research related to product improvement. Changes introduced into existing products without notice are
an expression of that philosophy.
u AC2212/00 Compact 2-Way Loudspeaker with 1 x 12” LF
BeamwidthHorizontal Off-Axis Frequency Response
Directivity Index, QVertical Up Off-Axis Frequency Response
Dimensions
Dimensions in mm (in)
For more detailed dimensional information, refer to Application Data Sheet.
For AE & AE Compact Series WRC and WRX versions please visit the JBL Pro website
at /www/products/installed-sound/ae-series#.V63kVfkrLIV to
download Drawings.
Vertical Down Off-Axis Frequency Response
Measurements obtained in full passive crossover mode with no signal processin g.
Graphs are from unaltered measured data.
Horizontal 1/3 Octave Polars
u AC2212/00 Compact 2-Way Loudspeaker with 1 x 12” LF
Vertical 1/3 Octave Polars
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
© Copyright 2016 JBL Professional
A Harman International Company
SS AC2212/00
CRP 10M
8/16
2024年5月31日发(作者：理志行)
AC2212/00
Compact 2-Way Loudspeaker
with 1 x 12” LF
Key Features:
u
100° x 100° Coverage.
u
P
Waveguide for good pattern control
T™ Progressive Transition™
with low distortion.
u
Bi-Amp/Passive Switchable.
u
Optional U-Bracket for easy installation.
u
O
(see AE Series Array Guide).
ptional planar array frame kit
Applications:
u
Lecture halls
u
Houses of worship
u
Corporate learning centers
u
Small performing arts facilities
u
Theatrical sound design
u
Auditoriums
u
Sports facilities
u
Themed entertainment venues
AC2212/00 is a compact 2-way full-
range loudspeaker system comprised of
one 300 mm (12 in) low frequency drive
and one 38 mm (1.5 in) exit/ 44
r
(1.75 in) voice-coil compression driver.
mm
The PT Progressive Transition waveguide
provides wide 100° by 100° coverage.
High-slope passive crossovers minimize
band overlap.
The cabinet is fitted with M10 threaded
suspension points. Optional U-bracket, as
well as pre-engineered array bracketry
is available for easy installation. Four
threaded inserts located on back of
the enclosure allow attachment of an
Omnimount™ or simila
bracket.
r mounting
AC2212/00 is part of JBL’s AE
Application Engineered Series, a versatil
family of loudspeakers for a wide variety
e
of fixed installation application s.
Specifications:
System:
Frequency Range
1
(-10 dB): 50 Hz – 19 kHz
Frequency Response
1
(±3 dB): 55 Hz – 17 kHz
Coverage Pattern: 100° x 100°
Directivity Factor (Q): 7.1
Directivity Index (DI): 8.5 dB
Crossover Modes: Bi-amp/Passive switchable
Passive Crossover Slopes
2
: 4th order (24 dB/oct) Transitional HP & LP, 1.3 kHz
Transducer Power Rating (AES)
3
: L
250 W (1000 W peak), 100 hrs
F: 300 W (1200 W peak), 2 hrs
HF: 50 W (200 W peak), 2 hrs
Long-Term System Power Rating (IEC)
4
: Passive mode: 250 W (1000 W peak), 100 hrs
Maximum SPL
5
: B
LF: 120 dB-SPL cont avg (126 dB peak)
i-amp mode:
HF: 126 dB-SPL cont avg (132 dB peak)
Passive mode:
120 dB-SPL cont avg (126 dB peak)
System Sensitivity
6
(1W @ 1m): Passive mode: 95 dB SPL
Transducers:
Low Frequency Driver: 1 x JBL M112-8 300 mm (12 in) driver with 63 mm (2.5 in) voice coil
Nominal Impedance: 8 ohms
Sensitivity
6
(1W @ 1m, within operational band): 95 dB SPL
High Frequency Driver: J
(1.75 in) voice coil
BL 2418H-1/MTA, 38 mm (1.5 in) exit compression driver, 44 mm
Nominal Impedance: 8 ohms
Sensitivity (1W @ 1m): 109 dB SPL
Waveguide: PT-F1010HF
Physical:
Enclosure: T
11-ply Finnish birch plywood
rapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade
Suspension Attachment: 1
4 x M8 on rear for MultiMount
5 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware.
®
MM-024-BT, or MM-020-CM
MM-022-BT,
Finish: Black DuraFlex™ finish. White available upon request.
Grille: P
black foam backing.
owder coated 14 gauge perforated steel, with acoustically transparent
Input Connector: N
terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or
L4 Neutrik Speakon
®
and CE-compliant covered barrier strip
max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier
strip for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D):
548 x 355 x 352 mm
(21.6 x 14.0 x 13.9 in)
Net Weight: 19.1 kg (42 lb)
Optional Accessories: M
U
10 x 35 mm forged shoulder eyebolts with washers
Optional planar array frame kit. See AE Series Bracket Guide
-Bracket MTU-4
Bi-amp mode, with recommended active tuning.
Resultant engineered acoustical response of crossover network and components.
long-term 100 hr rating are specified for low-frequency transducers.
AES standard, one decade pink noise with 6 dB crest factor within device’s operational band, free air. Standard AES 2 hr rating plus
IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.
Calculated based on power rating and sensitivity, exclusive of power compression.
Anechoic sensitivity in free field, no additional sensitivity gain from boundary loading.
JBL continually engages in research related to product improvement. Changes introduced into existing products without notice are
an expression of that philosophy.
u AC2212/00 Compact 2-Way Loudspeaker with 1 x 12” LF
BeamwidthHorizontal Off-Axis Frequency Response
Directivity Index, QVertical Up Off-Axis Frequency Response
Dimensions
Dimensions in mm (in)
For more detailed dimensional information, refer to Application Data Sheet.
For AE & AE Compact Series WRC and WRX versions please visit the JBL Pro website
at /www/products/installed-sound/ae-series#.V63kVfkrLIV to
download Drawings.
Vertical Down Off-Axis Frequency Response
Measurements obtained in full passive crossover mode with no signal processin g.
Graphs are from unaltered measured data.
Horizontal 1/3 Octave Polars
u AC2212/00 Compact 2-Way Loudspeaker with 1 x 12” LF
Vertical 1/3 Octave Polars
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
© Copyright 2016 JBL Professional
A Harman International Company
SS AC2212/00
CRP 10M
8/16