2024年11月1日发(作者：籍柔惠)
* Disclaimer: LG LED Monitor applies LCD screen with LED backlights.
Please read the safety information carefully
before using the product.
29UC97
29UC97C
2
Table of ConTenTs
Table of ConTenTs
3
lICense
4
asseMblInG anD
PRePaRInG
4 Product Composition
5 Product and Button Description
5 - How to Use the Joystick Button
6 - Input Connector
7 Moving and Lifting the Monitor
8 Installing the Monitor
8 - Assembling the Stand
9 - Installing on a Table
10 - Tidying up Cables
10 - Adjusting the Angle
11 - Using the Kensington Lock
11 - Installing on the Wall
13 - Installing the Wall Mount Bracket
14
UsInG THe MonIToR
14 Connecting to a PC
14 - HDMI Connection
15 - DisplayPort Connection
15 - Thunderbolt () Connection
16 Connecting AV Devices
16 - HDMI Connection
16 Connecting Peripherals
16 - USB Cable connection - PC
18 - Connecting Headphones
19
UseR seTTInGs
19 Activating the Main Menu
19 - Main Menu Features
20 User Settings
20 - Menu Settings
21 - Ratio
22 - PBP
24 - Picture Mode
25 - Picture Adjust
27 - Sound
28 - General
29 - Reset
30
TRoUblesHooTInG
32
PRoDUCT sPeCIfICaTIon
34 Factory Support Mode
34 HDMI Timing (Video)
34 Power LED
35
PRoPeR PosTURe
35 Proper Posture for Using the Monitor
lICense
3
lICense
Each model has different licenses. Visit for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
VESA, VESA logo, DisplayPort compliance logo and DisplayPort
compliance logo for dual-mode source devices are all registered trademarks of
the Video Electronics Standards Association.
MaxxAudio and additional MAXX trademarks are trademarks and/or registered
trademarks of Waves Audio Ltd.
4
asseMblInG anD PRePaRInG
asseMblInG anD PRePaRInG
Product Composition
Please check whether all the components are included in the box before using the product. If there are
any missing components, contact the retailer where you purchased the product. Note that the product and
related components may look different from those shown here.
CD (owner's Manual /
software / Guides) /
Cards
Power CordaC/DC adapterHDMI Cable
Cable Tiestand bodystand base
4 screws
(M4 x l10)
screw Cover
Wall Mount bracket
(Varies depending upon
your country or model.)
CaUTIon
y
Always use genuine LG components to ensure safety and product performance.
y
The product warranty will not cover damage or injury caused by the use of unauthorized components.
y
It is recommend that you use the supplied components.
y
If you use generic cables not certified by LG, the screen may not display or there may be image noise.
noTe
y
The components may look different from those illustrated here.
y
Without prior notice, all product information and specifications contained in this manual are subject to
change to improve the performance of the product.
y
To purchase optional accessories, visit an electronics store or an online shopping site, or contact the
retailer from which you purchased the product.
y
The power cord provided may differ depending upon the region.
asseMblInG anD PRePaRInG
5
Product and button Description
Joystick button
/
Power leD
y
on Power on
y
off Power off
How to Use the Joystick button
You can easily control the functions of the monitor by pressing the joystick button or moving it left or right
with your finger.
basic functions
Power on
Press the joystick button once with your finger to turn on the
monitor.
Power off
Press and hold the joystick button once with your finger to turn off
the monitor.
◄/►
Volume
Control
You can control the volume by moving the joystick button left/right.
noTe
y
The joystick button is located at the bottom of the monitor.
y
Before turning on the monitor, please make sure that the DC switch on the rear of product is On.
(29UC97 model only)
6
asseMblInG anD PRePaRInG
Input Connector
29UC97
HDMI IN 1
USB IN 1
DP-IN
USB UP
5 V 1.1 A
H/P
(19 V )
DC-IN
ON
DC switch
HDMI IN 2
USB IN 2
5 V 1.1 A
29UC97C
HDMI IN 1
USB IN 1
DP-IN
USB UP
5 V 0.9 A
H/P
(19 V )
DC-IN
HDMI IN 2
USB IN 2
5 V 0.9 A
Moving and lifting the
Monitor
When moving or lifting the monitor, follow these
instructions to prevent the monitor from being
scratched or damaged and to ensure safe trans-
portation, regardless of its shape or size.
y
Place the monitor in the original box or pack-
ing material before attempting to move it.
y
Before moving or lifting the monitor, discon-
nect the power cord and all other cables.
y
Hold the bottom and side of the monitor frame
firmly. Do not hold the panel itself.
y
When holding the monitor, the screen should
face toward you to prevent it from being
scratched.
y
When transporting the monitor, do not expose
the monitor to shock or excessive vibration.
y
When moving the monitor, keep it upright and
never turn the monitor on its side or tilt it side-
ways.
asseMblInG anD PRePaRInG
7
CaUTIon
y
Avoid touching the monitor screen as much as
possible.
- This may result in damage to the screen or
some of the pixels used to create images.
ENGLISH
y
If you use the monitor panel without the stand
base, its joystick button may cause the moni-
tor to become unstable and fall, resulting in
damage to the monitor or human injury. In
addition, this may cause the joystick button to
malfunction.
8
asseMblInG anD PRePaRInG
Installing the Monitor
assembling the stand
1
CaUTIon
y
To protect the screen, place the screen face
down on the screen pad which is inside the
box.
2
stand Hinge
3
stand body
stand base
4
5
screw Cover
ENGLISH
CaUTIon
y
Illustrations in this document represent typi-
cal procedures, so they may look different
from the actual product.
y
Applying excessive force when tightening
screws may cause damage to the monitor.
Damage caused in this way will not be cov-
ered by the product warranty.
y
Be careful not to hurt your hand on the edges
of the screw covers.
y
Do not carry the monitor upside down by just
holding the base. This may cause the moni-
tor to fall off the stand and could result in
personal injury.
y
When lifting or moving the monitor, do not
touch the monitor screen. The force applied
to the monitor screen may cause damage to
it.
noTe
y
You can disassemble the stand in the
reverse order of the assembly.
asseMblInG anD PRePaRInG
9
Installing on a Table
1
Lift the monitor and place it on the table in an
upright position. Place the monitor at least
10 cm away from the wall to ensure sufficient
ventilation.
ENGLISH
10 cm
10 cm
10 cm
10 cm
2
Connect the power adapter to the monitor and
then plug the power cord into the wall outlet.
3
Press the joystick button on the bottom of the
monitor to turn on the monitor.
CaUTIon
y
Unplug the power cord before moving or
installing the monitor. There is risk of electric
shock.
10
asseMblInG anD PRePaRInG
Cautions When Connecting Power Cord
100-240 V ~
y
Be sure to use the power cord that is provided
in the product package and connect it to a
grounded power outlet.
y
If you need another power cord, please con-
tact your local dealer or the nearest retail
store.
Tidying up Cables
Arrange the cables using the cable tie as shown in
the illustration.
adjusting the angle
1
Place the monitor mounted on the stand base
in an upright position.
2
Adjust the angle of the screen. The angle of
the screen can be adjusted forward or back-
ward from -5° to 15° for a comfortable
viewing experience.
15-5
Rear
front
WaRnInG
y
To avoid injury to the fingers when adjusting
the screen, do not hold the lower part of the
monitor's frame as illustrated below.
15
y
Be careful not to touch or press the screen
area when adjusting the angle of the monitor.
ENGLISH
15
-5
-5
Using the Kensington lock
The Kensington security system connector is
located at the back of the monitor.
For more information on installation and usage,
refer to the Kensington lock owner's manual or visit
the website at .
Connect the monitor to a table using the Kensing-
ton security system cable.
noTe
y
The Kensington security system is optional.
You can obtain optional accessories from most
electronics stores.
asseMblInG anD PRePaRInG
11
Installing on the Wall
Install the monitor at least 10 cm away from the
wall and leave about 10 cm of space at each side
of the monitor to ensure sufficient ventilation. De-
tailed installation instructions can be obtained from
your local retail store. Alternatively, please refer
to the manual for how to install and set up a tilting
wall mounting bracket.
10 cm
10 cm
10 cm
10 cm
To install the monitor to a wall, attach a wall mount-
ing bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is se-
curely fixed to the monitor and to the wall.
1
If you use screws longer than the standard
length, it may damage the inside of the
product.
2
A non-VESA standard screw may damage the
product and cause the monitor to fall. LG Elec-
tronics is not liable for any accidents relating to
the use of non-standard screws.
Wall Mount (a x b)100 x 100
stand screwM4 x L10
Required screws4
Wall Mount Plate
(optional)
RW120
12
asseMblInG anD PRePaRInG
y
Wall Mount (A x B)
A
B
noTe
y
Use the screws specified by VESA standards.
y
The wall mount kit includes the installation guide
and all necessary parts.
y
The wall mounting bracket is optional. You can
obtain optional accessories from your local dealer.
y
The length of the screw may differ for each wall
mounting bracket. Be sure to use the proper
length.
y
For more information, please refer to the user
manual for the wall mounting bracket.
CaUTIon
y
Unplug the power cord before moving or install-
ing the monitor to avoid electric shock.
y
Installing the monitor on the ceiling or on a
slanted wall may result in the monitor falling off,
which could lead to injury. Use an authorized
LG wall mount and contact the local dealer or
qualified personnel.
y
Applying excessive force when tightening
screws may cause damage to the monitor.
Damage caused in this way will not be covered
by the product warranty.
y
Use the wall mounting bracket and screws that
conform to VESA standards. Damage caused by
the use or misuse of inappropriate components
will not be covered by the product warranty.
y
When measured from the back of the monitor,
the length of each installed screw must be 8 mm
or less.
Wall Mount Plate
Back of the Monitor
Wall Mount Plate
Back of the Monitor
Screw
Dimensions
: M4 x L10
Max 8 mm
ENGLISH
Installing the Wall Mount bracket
1
2
Wall Mount bracket
stand Hinge
3
asseMblInG anD PRePaRInG
13
noTe
y
Be careful not to apply too much force while
mounting the wall mount bracket as it may
cause damage to the screen.
y
Applying excessive force when tightening
ENGLISH
screws may cause damage to the monitor.
Damage caused in this way will not be covered
by the product warranty.
14
UsInG THe MonIToR
UsInG THe MonIToR
y
The following instructions are based on the
29UC97 model. Illustrations in this manual
may differ from the actual product.
Press the joystick button, go to Menu → Quick
settings → Input, and then select the input op-
tion.
CaUTIon
y
Do not press the screen for a prolonged time.
This may cause image distortion.
y
Do not display a still image on the screen
for a prolonged time. This may cause image
retention. Use a screensaver if possible.
noTe
y
When connecting the power cord to the out-
let, use a grounded (3-hole) power strip or a
grounded power outlet.
y
The monitor may flicker when turned on in
an area where the temperature is low. This is
normal.
y
Sometimes red, green, or blue spots may ap-
pear on the screen. This is normal.
Connecting to a PC
y
This monitor supports the *Plug and Play fea-
ture.
* Plug and Play: A feature that allows you to add a
device to your computer without having to recon-
figure anything or install any drivers.
HDMI Connection
Transmits digital video and audio signals from your
PC to the monitor. Connect your PC to the monitor
using the HDMI cable as shown in the illustration
below.
HDMI IN 1
HDMI IN 2
CaUTIon
HDMI IN 1
y
Make sure to use the supplied HDMI cable of
the product. Otherwise, this may cause the
HDMI IN 2
device to malfunction.
y
Connecting your PC to the monitor using the
HDMI cable may cause device compatibility
issues.
y
Using a DVI to HDMI / DP (DisplayPort) to
HDMI cable may cause compatibility issues.
y
Use a certified cable with the HDMI logo
attached. If you do not use a certified HDMI
cable, the screen may not display or a con-
nection error may occur.
DP-IN
y
Recommended HDMI cable types
-
High-Speed HDMI
®
/
TM
cable
-
High-Speed HDMI
®
/
TM
cable with Ethernet
DP OUT
HDMI IN 1
HDMI IN 2
DisplayPort Connection
Transmits digital video and audio signals from your
PC to the monitor. Connect the monitor to your PC
using the display port cable as shown in the illus-
tration below.
DP-IN
(sold separately)
DP OUT
noTe
y
There may be no video or audio output de-
pending upon the DP (DisplayPort) version of
the PC.
DP-IN
UsInG THe MonIToR
15
Thunderbolt () Connection
29UC97
You can connect your high-resolution display or
high-performance data device to the monitor via a
Thunderbolt port. Connect your external device to
DP OUT
ENGLISH
the monitor using the Thunderbolt cable as illus-
trated below.
(sold separately)
noTe
y
The maximum data transmission rate of each
port is 20 Gb/s.
y
Make sure to use a Thunderbolt (
) certified
cable. Otherwise, this may cause the device to
malfunction.
y
Thunderbolt (
) is supported in such environ-
ments as Windows 7, Windows 8.1, and Mac
product.
y
Mac products may not support the recom-
mended resolution or the some features. For
more information, refer to the support informa-
tion card which is provided separately.
y
The ability to set up dual monitors using the
Thunderbolt (
) and daisy-chaining technology
depends on the performance of your graphics
card.
16
UsInG THe MonIToR
Connecting aV Devices
HDMI Connection
HDMI IN 2
HDMI transmits digital video and audio signals
from your AV device to the monitor. Connect your
AV device to the monitor using the HDMI cable as
shown in the illustration below.
HDMI IN 1
HDMI IN 2
noTe
y
Make sure to use the supplied HDMI cable of
DP-IN
the product. Otherwise, this may cause the
device to malfunction.
y
Using a DVI to HDMI / DP (DisplayPort) to
HDMI cable may cause compatibility issues.
y
Use a certified cable with the HDMI logo
attached. If you do not use a certified HDMI
cable, the screen may not display or a con-
nection error may occur.
y
Recommended HDMI cable types
DP OUT
-
High-Speed HDMI
®
/
TM
cable
-
High-Speed HDMI
®
/
TM
cable with Ethernet
Connecting Peripherals
Usb Cable connection - PC
The USB port on the product functions as a USB
hub.
noTe
y
Make sure to install the most recent Windows
OS service pack before using the product.
y
Peripheral devices are sold separately.
y
A keyboard, mouse, or USB device can be
connected to the USB port.
CaUTIon
Cautions When Using a Usb Device
y
A USB device with an automatic recognition
program installed, or that uses its own driver,
may not be recognized.
y
Some USB devices may not be supported or
may not work properly.
y
It is recommended to use a USB hub or hard
disk drive with power supplied. (If the power
supply is not adequate, the USB device may
not be recognized properly.)
HDMI/DP (DisplayPort) connection
To use USB 3.0, connect the A-B type USB 3.0
cable of the product to the PC.
Peripheral devices connected to the USB IN port
can be controlled from the PC.
29UC97
USB IN 1
USB UP
5 V 1.1 A
(sold separately)
USB IN 2
5 V 1.1 A
(sold separately)
29UC97C
USB IN 1
USB UP
5 V 1.1 A
USB IN 1
USB UP
5 V 0.9 A
(sold separately)
USB IN 2
5 V 1.1 A
USB IN 2
5 V 0.9 A
(sold separately)
USB IN 1
USB UP
5 V 1.1 A
H/P
USB IN 2
5 V 1.1 A
UsInG THe MonIToR
USB IN 1
17
USB UP
5 V 1.1 A
Thunderbolt () connection
USB IN 2
5 V 1.1 A
29UC97
Peripheral devices connected to the USB IN port
can be controlled from the PC.
If you change the input on the menu while a device
ENGLISH
is in connection via the Thunderbolt port, then the
device in connection via the USB port may not
work properly.
USB IN 1
USB UP
5 V 1.1 A
(sold separately)
USB IN 2
5 V 1.1 A
(sold separately)
H/P
18
UsInG THe MonIToR
Connecting Headphones
ENGLISH
Connect peripherals to the monitor via the head-
phones port. Connect as illustrated.
H/P
(sold separately)
noTe
y
Peripheral devices are sold separately.
y
If you use angled earphones, it may cause
a problem with connecting another external
device to the monitor. Therefore, it is recom-
mended to use straight earphones.
angledstraight
y
Depending on the audio settings of the PC
and external device, headphones and speaker
functions may be limited.
UseR seTTInGs
19
UseR seTTInGs
ENGLISH
activating the Main Menu
1
Press the joystick button on the bottom of the monitor.
2
Move the joystick up/down (▲/▼) and left/right(◄/►) to set the options.
3
Press the joystick button once more to exit the main menu.
Joystick button
buttonMenu status
Main menu disabled
Main menu enabled
Enables the main menu.
Description
Exits the main menu.
(Holding down the button to turn off the monitor. You can turn off
the monitor this way at any time, including when the OSD is on.)
Main menu disabledAdjusts the monitor volume level.
◄
Main menu enabledEnters the menu features.
Main menu disabledAdjusts the monitor volume level.
►
Main menu enabledEnters the PBP feature.
Main menu disabledEnables the main menu.
▲
Main menu enabledEnters the MaxxAudio feature.
Main menu disabledEnables the main menu.
▼
Main menu enabledTurns off the monitor.
Main Menu features
Main Menu
Maxxaudio
Description
Configures the screen settings.
Sets the sound quality.
Displays the screens of two input modes on one monitor.
Turns off the monitor.
Exits the main menu.
Menu
Maxxaudio
Menu
exit
PbP
PbP
Monitor off
Monitor off
exit
long press: Monitor off
20
UseR seTTInGs
User settings
Menu settings
1
To view the osD menu, press the joystick button at the bottom of the monitor and then enter the
2
3
To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it.
4
If you want to exit the OSD menu, move the joystick to ◄ until you exit.
y
When you enter the menu, instructions on how to use the button will appear in the bottom right corner
of the screen.
Menu.
Configure the options by moving the joystick up/down/left/right.
Quick settingsPbPPicturesoundGeneralReset
Each option is described below.
Menu
Quick
settings
brightness
Contrast
Volume
Description
Adjusts the color contrast and brightness of the screen.
Adjusts the volume level.
noTe
y
You can adjust Mute/Unmute by moving the joystick button to ▼ in the Volume
menu.
Input
Ratio
PbP
PicturePicture
Mode
Picture
adjust
sound
General
Reset
◄exit
Selects the input mode.
Adjusts the aspect ratio of the screen.
Displays the screens of two input modes on one monitor.
Optimizes the screen for picture mode.
Adjusts Sharpness, Black Level, Response Time, Gamma, Color Temp, and Six Color of
the screen.
Adjusts the MaxxAudio, MaxxAudio Settings, and Midnight Mode.
Adjusts Language, SMART ENERGY SAVING, Power LED, Automatic Standby, and
OSD Lock.
Restores the default settings.
Exits the OSD menu.
CaUTIon
y
Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual.
UseR seTTInGs
21
Ratio
1
To view the osD menu, press the joystick button at the
2
3
Configure the options following the instructions that appear in
4
5
the bottom right corner.
To return to the upper menu or set other menu items, move
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
bottom of the monitor and then enter the Menu.
Go to Quick settings > Ratio by moving the joystick.
Quick settings
Quick settings
brightness
Contrast
Volume
PbP
Input
Ratio
Picture
100
70
30
HDMI1
Wide
>
>
>
>
>
ENGLISH
sound
General
Reset
▲/▼: Move
/ ►: OK
◄: Back
Each option is described below.
Menu > Quick settings > Ratio
Wide
original
Cinema 1
Cinema 2
1:1
Description
Displays the video in widescreen, regardless of the video signal input.
Displays video according to the aspect ratio of the video signal input.
Enlarges the screen with an aspect ratio of 21:9. (at 1080p)
Enlarges the screen with an aspect ratio of 21:9, including the black box at the
bottom for subtitles. (at 1080p)
The aspect ratio is not adjusted from the original.
noTe
y
The display may look the same for Wide, Original, and 1:1 options at the recommended resolution
(2560 x 1080).
y
The ratio is disabled in the interlaced signal.
22
UseR seTTInGs
PbP
PbP
suboff
HDMI1
>
>
1
To view the osD menu, press the joystick button at the
2
3
Configure the options following the instructions that appear
4
5
bottom of the monitor and then enter the Menu.
Go to PbP by moving the joystick.
Quick settings
sound out
swap
PbP
sub full
Ratio
in the bottom right corner.
To return to the upper menu or set other menu items, move
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
>
Picture
sound
General
PBP Preview
Reset
HDMI1
▲/▼ : Move
/ ►: OK
◄: Back
Each option is described below.
Menu > PbP
sub
Description
Displays the screens of two input modes on one monitor.
sub screen (Right)
PbP Connection
HDMI 1
Main
screen
(left)
HDMI 2
DisplayPort
Thunderbolt ()
(29UC97 model
only)
HDMI 1
-
O
O
O
HDMI 2
O
-
O
O
DisplayPort
O
O
-
X
Thunderbolt ()
(29UC97 model
only)
O
O
X
-
sound out
swap
sub full
Changes the audio output in PBP mode.
Toggles between the main screen and sub screen in PBP mode.
Converts the sub screen in PBP mode to wide screen.
UseR seTTInGs
23
Menu > PbP
Ratio
MainWide
original
subWide
original
Description
Adjusts the aspect ratio of the main screen or sub screen.
Displays the video to fit the PBP screen, regardless of the
video signal input.
Displays the video in the aspect ratio of the video signal input
on the PBP screen.
Displays the video to fit the PBP screen, regardless of the
video signal input.
Displays the video in the aspect ratio of the video signal input
on the PBP screen.
ENGLISH
noTe
y
When the Sub mode is Off, Sound Out, Swap, Sub Full, and Ratio menus become disabled.
The Main/Sub options for Ratio become disabled if there is no signal.
y
The optimal resolution for PBP mode is set automatically when PBP mode is set.
(29UC97C model only)
24
UseR seTTInGs
Picture Mode
Picture
Picture Mode
>
>
1
To view the osD menu, press the joystick button at the
2
3
Configure the options following the instructions that appear
4
5
bottom of the monitor and then enter the Menu.
Go to Picture > Picture Mode by moving the joystick.
Quick settings
Picture adjust
PbP
in the bottom right corner.
To return to the upper menu or set other menu items, move
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
Picture
sound
General
Reset
▲/▼: Move
/ ►: OK
◄: Back
Each option is described below.
Menu > Picture >
Picture Mode
Picture ModeCustom
Photo
Cinema
Game
Reader 1
Reader 2
Description
Allows the user to adjust settings. You can adjust the color mode of the main
menu.
Optimizes the screen for photos.
Optimizes the screen for videos.
Optimizes the screen for games.
Optimizes the screen for browsing newspapers. You can brighten the screen in
the OSD menu.
Optimizes the screen for looking at cartoons. You can brighten the screen in the
OSD menu.
noTe
y
If Picture Mode is non-Custom, SMART ENERGY SAVING will automatically be Off.
UseR seTTInGs
25
Picture adjust
1
To view the osD menu, press the joystick button at the
2
3
Configure the options following the instructions that appear
4
5
bottom of the monitor and then enter the Menu.
Go to Picture > Picture adjust by moving the joystick.
Quick settings
Picture
Picture Mode
Picture adjust
>
>
ENGLISH
PbP
in the bottom right corner.
To return to the upper menu or set other menu items, move
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
Picture
sound
General
Reset
▲/▼: Move
/ ►: OK
◄: Back
Each option is described below.
Menu > Picture >
Picture adjust
sharpness
black level
Adjusts the sharpness of the screen.
Sets the offset level (for HDMI only).
•
2024年11月1日发(作者：籍柔惠)
* Disclaimer: LG LED Monitor applies LCD screen with LED backlights.
Please read the safety information carefully
before using the product.
29UC97
29UC97C
2
Table of ConTenTs
Table of ConTenTs
3
lICense
4
asseMblInG anD
PRePaRInG
4 Product Composition
5 Product and Button Description
5 - How to Use the Joystick Button
6 - Input Connector
7 Moving and Lifting the Monitor
8 Installing the Monitor
8 - Assembling the Stand
9 - Installing on a Table
10 - Tidying up Cables
10 - Adjusting the Angle
11 - Using the Kensington Lock
11 - Installing on the Wall
13 - Installing the Wall Mount Bracket
14
UsInG THe MonIToR
14 Connecting to a PC
14 - HDMI Connection
15 - DisplayPort Connection
15 - Thunderbolt () Connection
16 Connecting AV Devices
16 - HDMI Connection
16 Connecting Peripherals
16 - USB Cable connection - PC
18 - Connecting Headphones
19
UseR seTTInGs
19 Activating the Main Menu
19 - Main Menu Features
20 User Settings
20 - Menu Settings
21 - Ratio
22 - PBP
24 - Picture Mode
25 - Picture Adjust
27 - Sound
28 - General
29 - Reset
30
TRoUblesHooTInG
32
PRoDUCT sPeCIfICaTIon
34 Factory Support Mode
34 HDMI Timing (Video)
34 Power LED
35
PRoPeR PosTURe
35 Proper Posture for Using the Monitor
lICense
3
lICense
Each model has different licenses. Visit for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
VESA, VESA logo, DisplayPort compliance logo and DisplayPort
compliance logo for dual-mode source devices are all registered trademarks of
the Video Electronics Standards Association.
MaxxAudio and additional MAXX trademarks are trademarks and/or registered
trademarks of Waves Audio Ltd.
4
asseMblInG anD PRePaRInG
asseMblInG anD PRePaRInG
Product Composition
Please check whether all the components are included in the box before using the product. If there are
any missing components, contact the retailer where you purchased the product. Note that the product and
related components may look different from those shown here.
CD (owner's Manual /
software / Guides) /
Cards
Power CordaC/DC adapterHDMI Cable
Cable Tiestand bodystand base
4 screws
(M4 x l10)
screw Cover
Wall Mount bracket
(Varies depending upon
your country or model.)
CaUTIon
y
Always use genuine LG components to ensure safety and product performance.
y
The product warranty will not cover damage or injury caused by the use of unauthorized components.
y
It is recommend that you use the supplied components.
y
If you use generic cables not certified by LG, the screen may not display or there may be image noise.
noTe
y
The components may look different from those illustrated here.
y
Without prior notice, all product information and specifications contained in this manual are subject to
change to improve the performance of the product.
y
To purchase optional accessories, visit an electronics store or an online shopping site, or contact the
retailer from which you purchased the product.
y
The power cord provided may differ depending upon the region.
asseMblInG anD PRePaRInG
5
Product and button Description
Joystick button
/
Power leD
y
on Power on
y
off Power off
How to Use the Joystick button
You can easily control the functions of the monitor by pressing the joystick button or moving it left or right
with your finger.
basic functions
Power on
Press the joystick button once with your finger to turn on the
monitor.
Power off
Press and hold the joystick button once with your finger to turn off
the monitor.
◄/►
Volume
Control
You can control the volume by moving the joystick button left/right.
noTe
y
The joystick button is located at the bottom of the monitor.
y
Before turning on the monitor, please make sure that the DC switch on the rear of product is On.
(29UC97 model only)
6
asseMblInG anD PRePaRInG
Input Connector
29UC97
HDMI IN 1
USB IN 1
DP-IN
USB UP
5 V 1.1 A
H/P
(19 V )
DC-IN
ON
DC switch
HDMI IN 2
USB IN 2
5 V 1.1 A
29UC97C
HDMI IN 1
USB IN 1
DP-IN
USB UP
5 V 0.9 A
H/P
(19 V )
DC-IN
HDMI IN 2
USB IN 2
5 V 0.9 A
Moving and lifting the
Monitor
When moving or lifting the monitor, follow these
instructions to prevent the monitor from being
scratched or damaged and to ensure safe trans-
portation, regardless of its shape or size.
y
Place the monitor in the original box or pack-
ing material before attempting to move it.
y
Before moving or lifting the monitor, discon-
nect the power cord and all other cables.
y
Hold the bottom and side of the monitor frame
firmly. Do not hold the panel itself.
y
When holding the monitor, the screen should
face toward you to prevent it from being
scratched.
y
When transporting the monitor, do not expose
the monitor to shock or excessive vibration.
y
When moving the monitor, keep it upright and
never turn the monitor on its side or tilt it side-
ways.
asseMblInG anD PRePaRInG
7
CaUTIon
y
Avoid touching the monitor screen as much as
possible.
- This may result in damage to the screen or
some of the pixels used to create images.
ENGLISH
y
If you use the monitor panel without the stand
base, its joystick button may cause the moni-
tor to become unstable and fall, resulting in
damage to the monitor or human injury. In
addition, this may cause the joystick button to
malfunction.
8
asseMblInG anD PRePaRInG
Installing the Monitor
assembling the stand
1
CaUTIon
y
To protect the screen, place the screen face
down on the screen pad which is inside the
box.
2
stand Hinge
3
stand body
stand base
4
5
screw Cover
ENGLISH
CaUTIon
y
Illustrations in this document represent typi-
cal procedures, so they may look different
from the actual product.
y
Applying excessive force when tightening
screws may cause damage to the monitor.
Damage caused in this way will not be cov-
ered by the product warranty.
y
Be careful not to hurt your hand on the edges
of the screw covers.
y
Do not carry the monitor upside down by just
holding the base. This may cause the moni-
tor to fall off the stand and could result in
personal injury.
y
When lifting or moving the monitor, do not
touch the monitor screen. The force applied
to the monitor screen may cause damage to
it.
noTe
y
You can disassemble the stand in the
reverse order of the assembly.
asseMblInG anD PRePaRInG
9
Installing on a Table
1
Lift the monitor and place it on the table in an
upright position. Place the monitor at least
10 cm away from the wall to ensure sufficient
ventilation.
ENGLISH
10 cm
10 cm
10 cm
10 cm
2
Connect the power adapter to the monitor and
then plug the power cord into the wall outlet.
3
Press the joystick button on the bottom of the
monitor to turn on the monitor.
CaUTIon
y
Unplug the power cord before moving or
installing the monitor. There is risk of electric
shock.
10
asseMblInG anD PRePaRInG
Cautions When Connecting Power Cord
100-240 V ~
y
Be sure to use the power cord that is provided
in the product package and connect it to a
grounded power outlet.
y
If you need another power cord, please con-
tact your local dealer or the nearest retail
store.
Tidying up Cables
Arrange the cables using the cable tie as shown in
the illustration.
adjusting the angle
1
Place the monitor mounted on the stand base
in an upright position.
2
Adjust the angle of the screen. The angle of
the screen can be adjusted forward or back-
ward from -5° to 15° for a comfortable
viewing experience.
15-5
Rear
front
WaRnInG
y
To avoid injury to the fingers when adjusting
the screen, do not hold the lower part of the
monitor's frame as illustrated below.
15
y
Be careful not to touch or press the screen
area when adjusting the angle of the monitor.
ENGLISH
15
-5
-5
Using the Kensington lock
The Kensington security system connector is
located at the back of the monitor.
For more information on installation and usage,
refer to the Kensington lock owner's manual or visit
the website at .
Connect the monitor to a table using the Kensing-
ton security system cable.
noTe
y
The Kensington security system is optional.
You can obtain optional accessories from most
electronics stores.
asseMblInG anD PRePaRInG
11
Installing on the Wall
Install the monitor at least 10 cm away from the
wall and leave about 10 cm of space at each side
of the monitor to ensure sufficient ventilation. De-
tailed installation instructions can be obtained from
your local retail store. Alternatively, please refer
to the manual for how to install and set up a tilting
wall mounting bracket.
10 cm
10 cm
10 cm
10 cm
To install the monitor to a wall, attach a wall mount-
ing bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is se-
curely fixed to the monitor and to the wall.
1
If you use screws longer than the standard
length, it may damage the inside of the
product.
2
A non-VESA standard screw may damage the
product and cause the monitor to fall. LG Elec-
tronics is not liable for any accidents relating to
the use of non-standard screws.
Wall Mount (a x b)100 x 100
stand screwM4 x L10
Required screws4
Wall Mount Plate
(optional)
RW120
12
asseMblInG anD PRePaRInG
y
Wall Mount (A x B)
A
B
noTe
y
Use the screws specified by VESA standards.
y
The wall mount kit includes the installation guide
and all necessary parts.
y
The wall mounting bracket is optional. You can
obtain optional accessories from your local dealer.
y
The length of the screw may differ for each wall
mounting bracket. Be sure to use the proper
length.
y
For more information, please refer to the user
manual for the wall mounting bracket.
CaUTIon
y
Unplug the power cord before moving or install-
ing the monitor to avoid electric shock.
y
Installing the monitor on the ceiling or on a
slanted wall may result in the monitor falling off,
which could lead to injury. Use an authorized
LG wall mount and contact the local dealer or
qualified personnel.
y
Applying excessive force when tightening
screws may cause damage to the monitor.
Damage caused in this way will not be covered
by the product warranty.
y
Use the wall mounting bracket and screws that
conform to VESA standards. Damage caused by
the use or misuse of inappropriate components
will not be covered by the product warranty.
y
When measured from the back of the monitor,
the length of each installed screw must be 8 mm
or less.
Wall Mount Plate
Back of the Monitor
Wall Mount Plate
Back of the Monitor
Screw
Dimensions
: M4 x L10
Max 8 mm
ENGLISH
Installing the Wall Mount bracket
1
2
Wall Mount bracket
stand Hinge
3
asseMblInG anD PRePaRInG
13
noTe
y
Be careful not to apply too much force while
mounting the wall mount bracket as it may
cause damage to the screen.
y
Applying excessive force when tightening
ENGLISH
screws may cause damage to the monitor.
Damage caused in this way will not be covered
by the product warranty.
14
UsInG THe MonIToR
UsInG THe MonIToR
y
The following instructions are based on the
29UC97 model. Illustrations in this manual
may differ from the actual product.
Press the joystick button, go to Menu → Quick
settings → Input, and then select the input op-
tion.
CaUTIon
y
Do not press the screen for a prolonged time.
This may cause image distortion.
y
Do not display a still image on the screen
for a prolonged time. This may cause image
retention. Use a screensaver if possible.
noTe
y
When connecting the power cord to the out-
let, use a grounded (3-hole) power strip or a
grounded power outlet.
y
The monitor may flicker when turned on in
an area where the temperature is low. This is
normal.
y
Sometimes red, green, or blue spots may ap-
pear on the screen. This is normal.
Connecting to a PC
y
This monitor supports the *Plug and Play fea-
ture.
* Plug and Play: A feature that allows you to add a
device to your computer without having to recon-
figure anything or install any drivers.
HDMI Connection
Transmits digital video and audio signals from your
PC to the monitor. Connect your PC to the monitor
using the HDMI cable as shown in the illustration
below.
HDMI IN 1
HDMI IN 2
CaUTIon
HDMI IN 1
y
Make sure to use the supplied HDMI cable of
the product. Otherwise, this may cause the
HDMI IN 2
device to malfunction.
y
Connecting your PC to the monitor using the
HDMI cable may cause device compatibility
issues.
y
Using a DVI to HDMI / DP (DisplayPort) to
HDMI cable may cause compatibility issues.
y
Use a certified cable with the HDMI logo
attached. If you do not use a certified HDMI
cable, the screen may not display or a con-
nection error may occur.
DP-IN
y
Recommended HDMI cable types
-
High-Speed HDMI
®
/
TM
cable
-
High-Speed HDMI
®
/
TM
cable with Ethernet
DP OUT
HDMI IN 1
HDMI IN 2
DisplayPort Connection
Transmits digital video and audio signals from your
PC to the monitor. Connect the monitor to your PC
using the display port cable as shown in the illus-
tration below.
DP-IN
(sold separately)
DP OUT
noTe
y
There may be no video or audio output de-
pending upon the DP (DisplayPort) version of
the PC.
DP-IN
UsInG THe MonIToR
15
Thunderbolt () Connection
29UC97
You can connect your high-resolution display or
high-performance data device to the monitor via a
Thunderbolt port. Connect your external device to
DP OUT
ENGLISH
the monitor using the Thunderbolt cable as illus-
trated below.
(sold separately)
noTe
y
The maximum data transmission rate of each
port is 20 Gb/s.
y
Make sure to use a Thunderbolt (
) certified
cable. Otherwise, this may cause the device to
malfunction.
y
Thunderbolt (
) is supported in such environ-
ments as Windows 7, Windows 8.1, and Mac
product.
y
Mac products may not support the recom-
mended resolution or the some features. For
more information, refer to the support informa-
tion card which is provided separately.
y
The ability to set up dual monitors using the
Thunderbolt (
) and daisy-chaining technology
depends on the performance of your graphics
card.
16
UsInG THe MonIToR
Connecting aV Devices
HDMI Connection
HDMI IN 2
HDMI transmits digital video and audio signals
from your AV device to the monitor. Connect your
AV device to the monitor using the HDMI cable as
shown in the illustration below.
HDMI IN 1
HDMI IN 2
noTe
y
Make sure to use the supplied HDMI cable of
DP-IN
the product. Otherwise, this may cause the
device to malfunction.
y
Using a DVI to HDMI / DP (DisplayPort) to
HDMI cable may cause compatibility issues.
y
Use a certified cable with the HDMI logo
attached. If you do not use a certified HDMI
cable, the screen may not display or a con-
nection error may occur.
y
Recommended HDMI cable types
DP OUT
-
High-Speed HDMI
®
/
TM
cable
-
High-Speed HDMI
®
/
TM
cable with Ethernet
Connecting Peripherals
Usb Cable connection - PC
The USB port on the product functions as a USB
hub.
noTe
y
Make sure to install the most recent Windows
OS service pack before using the product.
y
Peripheral devices are sold separately.
y
A keyboard, mouse, or USB device can be
connected to the USB port.
CaUTIon
Cautions When Using a Usb Device
y
A USB device with an automatic recognition
program installed, or that uses its own driver,
may not be recognized.
y
Some USB devices may not be supported or
may not work properly.
y
It is recommended to use a USB hub or hard
disk drive with power supplied. (If the power
supply is not adequate, the USB device may
not be recognized properly.)
HDMI/DP (DisplayPort) connection
To use USB 3.0, connect the A-B type USB 3.0
cable of the product to the PC.
Peripheral devices connected to the USB IN port
can be controlled from the PC.
29UC97
USB IN 1
USB UP
5 V 1.1 A
(sold separately)
USB IN 2
5 V 1.1 A
(sold separately)
29UC97C
USB IN 1
USB UP
5 V 1.1 A
USB IN 1
USB UP
5 V 0.9 A
(sold separately)
USB IN 2
5 V 1.1 A
USB IN 2
5 V 0.9 A
(sold separately)
USB IN 1
USB UP
5 V 1.1 A
H/P
USB IN 2
5 V 1.1 A
UsInG THe MonIToR
USB IN 1
17
USB UP
5 V 1.1 A
Thunderbolt () connection
USB IN 2
5 V 1.1 A
29UC97
Peripheral devices connected to the USB IN port
can be controlled from the PC.
If you change the input on the menu while a device
ENGLISH
is in connection via the Thunderbolt port, then the
device in connection via the USB port may not
work properly.
USB IN 1
USB UP
5 V 1.1 A
(sold separately)
USB IN 2
5 V 1.1 A
(sold separately)
H/P
18
UsInG THe MonIToR
Connecting Headphones
ENGLISH
Connect peripherals to the monitor via the head-
phones port. Connect as illustrated.
H/P
(sold separately)
noTe
y
Peripheral devices are sold separately.
y
If you use angled earphones, it may cause
a problem with connecting another external
device to the monitor. Therefore, it is recom-
mended to use straight earphones.
angledstraight
y
Depending on the audio settings of the PC
and external device, headphones and speaker
functions may be limited.
UseR seTTInGs
19
UseR seTTInGs
ENGLISH
activating the Main Menu
1
Press the joystick button on the bottom of the monitor.
2
Move the joystick up/down (▲/▼) and left/right(◄/►) to set the options.
3
Press the joystick button once more to exit the main menu.
Joystick button
buttonMenu status
Main menu disabled
Main menu enabled
Enables the main menu.
Description
Exits the main menu.
(Holding down the button to turn off the monitor. You can turn off
the monitor this way at any time, including when the OSD is on.)
Main menu disabledAdjusts the monitor volume level.
◄
Main menu enabledEnters the menu features.
Main menu disabledAdjusts the monitor volume level.
►
Main menu enabledEnters the PBP feature.
Main menu disabledEnables the main menu.
▲
Main menu enabledEnters the MaxxAudio feature.
Main menu disabledEnables the main menu.
▼
Main menu enabledTurns off the monitor.
Main Menu features
Main Menu
Maxxaudio
Description
Configures the screen settings.
Sets the sound quality.
Displays the screens of two input modes on one monitor.
Turns off the monitor.
Exits the main menu.
Menu
Maxxaudio
Menu
exit
PbP
PbP
Monitor off
Monitor off
exit
long press: Monitor off
20
UseR seTTInGs
User settings
Menu settings
1
To view the osD menu, press the joystick button at the bottom of the monitor and then enter the
2
3
To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it.
4
If you want to exit the OSD menu, move the joystick to ◄ until you exit.
y
When you enter the menu, instructions on how to use the button will appear in the bottom right corner
of the screen.
Menu.
Configure the options by moving the joystick up/down/left/right.
Quick settingsPbPPicturesoundGeneralReset
Each option is described below.
Menu
Quick
settings
brightness
Contrast
Volume
Description
Adjusts the color contrast and brightness of the screen.
Adjusts the volume level.
noTe
y
You can adjust Mute/Unmute by moving the joystick button to ▼ in the Volume
menu.
Input
Ratio
PbP
PicturePicture
Mode
Picture
adjust
sound
General
Reset
◄exit
Selects the input mode.
Adjusts the aspect ratio of the screen.
Displays the screens of two input modes on one monitor.
Optimizes the screen for picture mode.
Adjusts Sharpness, Black Level, Response Time, Gamma, Color Temp, and Six Color of
the screen.
Adjusts the MaxxAudio, MaxxAudio Settings, and Midnight Mode.
Adjusts Language, SMART ENERGY SAVING, Power LED, Automatic Standby, and
OSD Lock.
Restores the default settings.
Exits the OSD menu.
CaUTIon
y
Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual.
UseR seTTInGs
21
Ratio
1
To view the osD menu, press the joystick button at the
2
3
Configure the options following the instructions that appear in
4
5
the bottom right corner.
To return to the upper menu or set other menu items, move
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
bottom of the monitor and then enter the Menu.
Go to Quick settings > Ratio by moving the joystick.
Quick settings
Quick settings
brightness
Contrast
Volume
PbP
Input
Ratio
Picture
100
70
30
HDMI1
Wide
>
>
>
>
>
ENGLISH
sound
General
Reset
▲/▼: Move
/ ►: OK
◄: Back
Each option is described below.
Menu > Quick settings > Ratio
Wide
original
Cinema 1
Cinema 2
1:1
Description
Displays the video in widescreen, regardless of the video signal input.
Displays video according to the aspect ratio of the video signal input.
Enlarges the screen with an aspect ratio of 21:9. (at 1080p)
Enlarges the screen with an aspect ratio of 21:9, including the black box at the
bottom for subtitles. (at 1080p)
The aspect ratio is not adjusted from the original.
noTe
y
The display may look the same for Wide, Original, and 1:1 options at the recommended resolution
(2560 x 1080).
y
The ratio is disabled in the interlaced signal.
22
UseR seTTInGs
PbP
PbP
suboff
HDMI1
>
>
1
To view the osD menu, press the joystick button at the
2
3
Configure the options following the instructions that appear
4
5
bottom of the monitor and then enter the Menu.
Go to PbP by moving the joystick.
Quick settings
sound out
swap
PbP
sub full
Ratio
in the bottom right corner.
To return to the upper menu or set other menu items, move
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
>
Picture
sound
General
PBP Preview
Reset
HDMI1
▲/▼ : Move
/ ►: OK
◄: Back
Each option is described below.
Menu > PbP
sub
Description
Displays the screens of two input modes on one monitor.
sub screen (Right)
PbP Connection
HDMI 1
Main
screen
(left)
HDMI 2
DisplayPort
Thunderbolt ()
(29UC97 model
only)
HDMI 1
-
O
O
O
HDMI 2
O
-
O
O
DisplayPort
O
O
-
X
Thunderbolt ()
(29UC97 model
only)
O
O
X
-
sound out
swap
sub full
Changes the audio output in PBP mode.
Toggles between the main screen and sub screen in PBP mode.
Converts the sub screen in PBP mode to wide screen.
UseR seTTInGs
23
Menu > PbP
Ratio
MainWide
original
subWide
original
Description
Adjusts the aspect ratio of the main screen or sub screen.
Displays the video to fit the PBP screen, regardless of the
video signal input.
Displays the video in the aspect ratio of the video signal input
on the PBP screen.
Displays the video to fit the PBP screen, regardless of the
video signal input.
Displays the video in the aspect ratio of the video signal input
on the PBP screen.
ENGLISH
noTe
y
When the Sub mode is Off, Sound Out, Swap, Sub Full, and Ratio menus become disabled.
The Main/Sub options for Ratio become disabled if there is no signal.
y
The optimal resolution for PBP mode is set automatically when PBP mode is set.
(29UC97C model only)
24
UseR seTTInGs
Picture Mode
Picture
Picture Mode
>
>
1
To view the osD menu, press the joystick button at the
2
3
Configure the options following the instructions that appear
4
5
bottom of the monitor and then enter the Menu.
Go to Picture > Picture Mode by moving the joystick.
Quick settings
Picture adjust
PbP
in the bottom right corner.
To return to the upper menu or set other menu items, move
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
Picture
sound
General
Reset
▲/▼: Move
/ ►: OK
◄: Back
Each option is described below.
Menu > Picture >
Picture Mode
Picture ModeCustom
Photo
Cinema
Game
Reader 1
Reader 2
Description
Allows the user to adjust settings. You can adjust the color mode of the main
menu.
Optimizes the screen for photos.
Optimizes the screen for videos.
Optimizes the screen for games.
Optimizes the screen for browsing newspapers. You can brighten the screen in
the OSD menu.
Optimizes the screen for looking at cartoons. You can brighten the screen in the
OSD menu.
noTe
y
If Picture Mode is non-Custom, SMART ENERGY SAVING will automatically be Off.
UseR seTTInGs
25
Picture adjust
1
To view the osD menu, press the joystick button at the
2
3
Configure the options following the instructions that appear
4
5
bottom of the monitor and then enter the Menu.
Go to Picture > Picture adjust by moving the joystick.
Quick settings
Picture
Picture Mode
Picture adjust
>
>
ENGLISH
PbP
in the bottom right corner.
To return to the upper menu or set other menu items, move
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
Picture
sound
General
Reset
▲/▼: Move
/ ►: OK
◄: Back
Each option is described below.
Menu > Picture >
Picture adjust
sharpness
black level
Adjusts the sharpness of the screen.
Sets the offset level (for HDMI only).
•