FCP0805H271J-J1中文资料-USB迷|专注于互联网分享

2024年2月23日发(作者：苦珠雨)

元器件交易网e FCP Surface Mount Film CapacitorsStable Stacked Metallized Film (PPS) Chips for Reﬂow SolderingThe Type FCP’s combination of high capacitance density

and excellent high frequency response makes it a great

choice for wireless and instrumentation applications.

Highlights♦

Stacked metallized polyphenylene sulﬁde (PPS) ﬁlm.♦

High operating temperature to +125 ºC♦ High capacitance per unit volumeType FCP stacked metallized polyphenelene sulﬁde (PPS) ﬁlm capacitors offer high

♦ Excellent high frequency performance♦ Capacitance change from –55 ºC to 105 ºC ≤ ±1.5%

♦ Stable cap and DF over wide temperature rangecapacitance per unit volume, stable capacitance and DF over a wide temperature

range, and excellent high frequency performance. Type FCP capacitors conform to

standard EIA 0603, 0805, 1206, 1210, 1913 & 2416 surface mount case sizes and

are packaged on tape and reel.

SpeciﬁcationsNominal Capacitance Range:Capacitance Tolerance:Rated Voltage:Dissipation Factor (Tan d):Operating Temperature Range:Dielectric Strength:Insulation Resistance:Construction:Life Test:100 pF to 0.22 µF (1kHz at ≤5 Vrms)±5% (J) Standard, ±2% (G) Optional16 Vdc and 50 Vdc0.6% Max. (1 kHz at ≤5 Vrms)–55 ºC to +125 ºC (See Voltage derating chart for

0.12 - 0.22 µF above 105 ºC)175% of rated Vdc for 5 seconds3000 MΩ Min. at 20 ºC, after 60 seconds (16 Vdc

rated, test 10 Vdc; 50 Vdc rated, test 50 Vdc)Stacked metallized polyphenylene sulﬁde (PPS)

ﬁlmCapacitors subjected to 1000 hours of maximum

rated temperature and 125% of the rated voltage

will not have any significant visual damage,

thecapacitance will be within ±2% of the initial

measured value, DF will be a maximum of 0.66%,

and IR will be a minimum of 1000 tors subjected to a 260 °C reﬂow soldering

for 5 seconds will not have any signiﬁcant visual

damage, dielectric strength will be as speciﬁed,

the capacitance will be within ±3% of the initial

measured value, DF will be a maximum of .66%,

and IR will be a minimum of 1000 ance to Soldering Heat:Complies with the EU Directive

2002/95/EC requirement

restricting the use of Lead (Pb),

Mercury (Hg), Cadmium (Cd),

Hexavalent chromium (Cr(VI)),

PolyBrominated Biphenyls (PBB)

and PolyBrominated Diphenyl

Ethers (PBDE).Moisture Resistance:

Capacitors subjected to 1000 hours at 40 °C and

90% to 95% RH and rated voltage will not have any

signiﬁcant visual damage, will withstand 1.3 times

the rated voltage for one minute, the capacitance

will be within ±2% of the initial measured value,

DF will be a maximum of 0.9%, and IR will be a

minimum of 1000 l Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 •

元器件交易网e FCP Surface Mount Film CapacitorsRatings

Capacitance(µF).00010.00012.00015.00018.00022.00027.00033.00039.00047.00056.00068.00082.0010.0012.0015.0018.0022.0027.0033.0039.0047.0056.0068.0082.010.012.015.018.022.027.033.039.047.056.068.082.100.12.15.18.22(nF).010.012.015.018.022.027.033.039.047.056.068.0821.001.201.501.802.202.703.303.904.705.606.808.27333947566882120(pF)12780016 VdcCatalogPart NumberFCP0603C101J-K1FCP0603C121J-K1FCP0603C151J-K1FCP0603C181J-K1FCP0603C221J-K1FCP0603C271J-K1FCP0603C331J-K1FCP0603C391J-K1FCP0603C471J-K1FCP0603C561J-K1FCP0603C681J-K1FCP0603C821J-K1FCP0603C102J-K1FCP0603C122J-K1FCP0603C152J-K1FCP0603C182J-K1FCP0603C222J-K1FCP0603C272J-K1FCP0805C332J-J1FCP0805C392J-J1FCP0805C472J-J1FCP0805C562J-J1FCP0805C682J-J1FCP0805C822J-J2FCP0805C103J-J2FCP1206C123J-H1FCP1206C153J-H1FCP1206C183J-H1FCP1206C223J-H1FCP1206C273J-H2FCP1206C333J-H2FCP1206C393J-H3FCP1206C473J-H3FCP1210C563J-G2FCP1210C683J-G2FCP1210C823J-G3FCP1210C104J-G3CaseCode50 VdcCatalogPart NumberFCP0805H101J-J1FCP0805H121J-J1FCP0805H151J-J1FCP0805H181J-J1FCP0805H221J-J1FCP0805H271J-J1FCP0805H331J-J1FCP0805H391J-J1FCP0805H471J-J1FCP0805H561J-J1FCP0805H681J-J1FCP0805H821J-J1FCP0805H102J-J1FCP0805H122J-J1FCP0805H152J-J1FCP0805H182J-J1FCP0805H222J-J1FCP0805H272J-J1FCP1206H332J-H1FCP1206H392J-H1FCP1206H472J-H1FCP1206H562J-H1FCP1206H682J-H1FCP1206H822J-H2FCP1206H103J-H2FCP1210H123J-G1FCP1210H153J-G1FCP1210H183J-G2FCP1210H223J-G2FCP1210H273J-G2FCP1210H333J-G3FCP1210H393J-G3FCP1913H473J-E1FCP1913H563J-E2FCP1913H683J-E2FCP1913H823J-E4FCP1913H104J-E3FCP2416H124J-D1FCP2416H154J-D3FCP2416H184J-D4FCP2416H224J-D52416CaseCode2101913Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 •

元器件交易网e FCP Surface Mount Film CapacitorsTypical Temperature CharacteristicsTypical Frequency CharacteristicsCornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 •

元器件交易网e FCP Surface Mount Film CapacitorsOutline DimensionsCaseCode06030805Outline Dimensions (in.)L±0.0080.0630.079WT ±0.0080.0350.0430.0350.0430.0590.043t0.032 ±0.0060.028 ±0.0060.014 ±0.0080.049 ±0.0080.018 ±0.010Case Size(metric)160820121.62Outline Dimensions (mm)L ±0.2WT ±0.20.91.10.91.11.51.1t0.80 ±0.150.7 ±0.150.35 ±0.21.25 ±0.20.45 ±0.25PackagingCodeK1J1J2H1H2H3G112060.1260.063 ±0.0080.026 ±0.01232163.21.6 ±0.20.65 ±0.312100.1260.098 ±0.0080.0590.0830.0550.0760.1100.0940.0710.0940.1100.1260.026 ±0.01232253.22.5 ±0.21.52.11.42.02.82.41.82.42.83.20.65 ±0.3G2G3F1E2E3E4D1D3D4D519130.1890.130 ±0.0120.014 ±0.00848334.83.3 ±0.30.35 ±0.224160.2360.161 ±0.0120.014 ±0.008604164.1 ±0.30.35 ±0.2Pulse Handling CapabilityCap(µF).00010.00012.00015.00018.00022.00027.00033.00039.00047.00056.00068.00082.0010.0012.0015.0018.0022.0027.0033.0039.0047.0056.0068.0082Voltage(Vdc)6666dV/dt(V/µs)425273Cap(µF).010.012.015.018.022.027.033.039.047.056.068.082.100.00010.00012.00015.00018.00022.00027.00033.00039.00047.00056.00068Voltage(Vdc)660dV/dt(V/µs)5248434422240Cap(µF).00082.0010.0012.0015.0018.0022.0027.0033.0039.0047.0056.0068.0082.010.012.015.018.022.027.033.039.047 - .10.12 - .22Voltage(Vdc)5050505050dV/dt(V/µs)440130Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 •

元器件交易网e FCP Surface Mount Film CapacitorsVrms vs. Frequency

Typical Applications

Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 •

元器件交易网e FCP Surface Mount Film CapacitorsTypical ApplicationsIn PLL circuit applications, FCP SMT ﬁlm capacitor advantages are tight tolerance on the capacitance value, stable

capacitance with temperature, faster lock-up times, and no noise due to piezoelectric effects.

Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 •

2024年2月23日发(作者：苦珠雨)

元器件交易网e FCP Surface Mount Film CapacitorsStable Stacked Metallized Film (PPS) Chips for Reﬂow SolderingThe Type FCP’s combination of high capacitance density

and excellent high frequency response makes it a great

choice for wireless and instrumentation applications.

Highlights♦

Stacked metallized polyphenylene sulﬁde (PPS) ﬁlm.♦

High operating temperature to +125 ºC♦ High capacitance per unit volumeType FCP stacked metallized polyphenelene sulﬁde (PPS) ﬁlm capacitors offer high

♦ Excellent high frequency performance♦ Capacitance change from –55 ºC to 105 ºC ≤ ±1.5%

♦ Stable cap and DF over wide temperature rangecapacitance per unit volume, stable capacitance and DF over a wide temperature

range, and excellent high frequency performance. Type FCP capacitors conform to

standard EIA 0603, 0805, 1206, 1210, 1913 & 2416 surface mount case sizes and

are packaged on tape and reel.

0.12 - 0.22 µF above 105 ºC)175% of rated Vdc for 5 seconds3000 MΩ Min. at 20 ºC, after 60 seconds (16 Vdc

rated, test 10 Vdc; 50 Vdc rated, test 50 Vdc)Stacked metallized polyphenylene sulﬁde (PPS)

ﬁlmCapacitors subjected to 1000 hours of maximum

rated temperature and 125% of the rated voltage

will not have any significant visual damage,

thecapacitance will be within ±2% of the initial

measured value, DF will be a maximum of 0.66%,

and IR will be a minimum of 1000 tors subjected to a 260 °C reﬂow soldering

for 5 seconds will not have any signiﬁcant visual

damage, dielectric strength will be as speciﬁed,

the capacitance will be within ±3% of the initial

measured value, DF will be a maximum of .66%,

and IR will be a minimum of 1000 ance to Soldering Heat:Complies with the EU Directive

2002/95/EC requirement

restricting the use of Lead (Pb),

Mercury (Hg), Cadmium (Cd),

Hexavalent chromium (Cr(VI)),

PolyBrominated Biphenyls (PBB)

and PolyBrominated Diphenyl

Ethers (PBDE).Moisture Resistance:

Capacitors subjected to 1000 hours at 40 °C and

90% to 95% RH and rated voltage will not have any

signiﬁcant visual damage, will withstand 1.3 times

the rated voltage for one minute, the capacitance

will be within ±2% of the initial measured value,

DF will be a maximum of 0.9%, and IR will be a

minimum of 1000 l Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 •

元器件交易网e FCP Surface Mount Film CapacitorsRatings

元器件交易网e FCP Surface Mount Film CapacitorsVrms vs. Frequency

Typical Applications

Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 •

元器件交易网e FCP Surface Mount Film CapacitorsTypical ApplicationsIn PLL circuit applications, FCP SMT ﬁlm capacitor advantages are tight tolerance on the capacitance value, stable

capacitance with temperature, faster lock-up times, and no noise due to piezoelectric effects.

Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 •

USB迷 | 专注于互联网分享

FCP0805H271J-J1中文资料

与本文相关的文章

评论列表 (0)